Skylarc's Plant, Machinery and General Goods Auction

2004 Ford Falcon XR8

Skylarc Ref F133142

Model

Falcon

Year

2004

Kilometres

220392

2004 Ford Falcon XR8 Boss
5.4 litre V8 engine
4 speed automatic transmission
Cruise control
Tow bar
18" alloy wheels
Air conditioning
Electric windows
Electric drivers seat
New warrant of fitness
Bubbling to clear coat in several places
Rip in drivers seat
Cracks in dash cover
Drink holder cover doesn't close
Curbing to mags
Tyres with good tread
Starts and runs well but has electrical gremlins, e.g. occasionally gives an oil pressure warning but oil pressure has been tested and is normal.
Recent mechanical work includes head gasket and computer replacement
Great opportunity to get into a classic Aussie muscle car

This vehicle is part of an insolvency process it's service history is unknown.

To see this car running:
https://youtu.be/uMWOXF5BlC0

Denyo 180 Screw Compressor

Skylarc Ref K132445

Denyo 180 Rotary Screw Compressor.
3 cylinder deisel engine.
5321 hours on clock
Air output: 5.1 m3/min.
Air pressure: 7 kgf/cm2.
Runs well

To see this machine running:
https://youtu.be/FuFbMbT88kk

Portable Line Borer Assembly

Skylarc Ref Q132451

Portable Line Borer Assembly.
Lot includes:
Large set of Turning and Drawing Components.
9 Boring Tools (Various lengths and Diameters):
1 x 3505mm x 72mm.
1 x 3990mm x 51mm.
1 x 3514mm x 51mm.
1 x 2902mm x 50mm.
1 x 2096mm x 60mm.
1 x 1660mm x 50mm.
1 x 1305mm x 50mm.
1 x 765mm x 45mm.
1 x 676mm x 50mm.
Plate pulling Tool.
Hydraulic Hoses.
Carrying cases for Draw and turning tools.

W.P Walker Large Industrial English Wheel

Skylarc Ref I132443

W.P Walker Large Industrial English Wheel.
Can be used for stretching, planishing, and forming.
Comes with:
80x75mm Crowned Wheel.
80x75mm Wheel.
70x75mm Wheel.

TruPro Three Phase Drum Sander

Skylarc Ref Y133421

TruPro Three Phase Drum Sander.
Model: IMASAMS25.
20 Amp, 230 Volt, 50Hz single Phase.
Max 140mm Clearance.

Lincoln IdealArc DC-4000 Welder w/ LN-7 Wire Feeder

Skylarc Ref Q132659

Lincoln IdealArc DC-4000 Welder.
Includes Lincoln LN-7 Wire Feeder.
Three phase
Items show typical industrial usage and wear.

2011 Ford Falcon FG XT Sedan (Crash Damaged)

Skylarc Ref B132384

2011 Ford Falcon FG written off due to crash damage
Hard impact to the front right side
Cooling system was emptied in the crash and vehicle has not been touched since
Oil in engine
Deregistered
4 litre Ford Barra engine
6 speed ZF6HP26 automatic transmission
Alloy wheels

3 Phase Portable Hydraulic Power Pack

Skylarc Ref W132457

3 Phase Portable Hydraulic Power Pack.
Unit is secured to 4 castor wheel Trolley.
WEG Electic Motor

Union Graduate Single Phase Wood Lathe

Skylarc Ref J132444

Union Graduate Single Phase Wood Lathe.
Single Phase motor, 4 Spindle Speeds (425, 790, 1330, 2250RPM).
Double ended Spindle.
Unit comes with two face plates and two tool holders.
180mm and 210mm Diameter Face Plates.
800mm Length between tailstock and face plate.

10 x 2.4M Scaffolding Platforms

Skylarc Ref L133148

10 x 2.4M Scaffolding Platforms.
Platform Dimensions: 2400mm x 600mm.
7 x 450KG SWL.
3 x 225KG SWL.

Hydraulic Lathe Copy Attachment

Skylarc Ref B133424

Ruey Tay Copy Attachment
Bed length 1000mm
Distance between centers approx 800mm
Includes three phase hydraulic pump

Cebora Mig 335C Welder

Skylarc Ref J130286

Cebora Mig 335C Welder.
3 Phase, 330A Max Output.
Please see data plate in photos for specifications.
Includes: Fire Extinguisher, Torch, Ground and Regulator Valve.

4x Large Diameter Morse Taper Drills, Imperial & Metric Sizes

Skylarc Ref V132664

4x Large Diameter Morse Taper Drills, Imperial & Metric Sizes.
All have Morse Taper No. 4 size shanks.
Includes sizes:
2"
49mm
47mm
46mm
Condition varies with each unit

6x Large Diameter Morse Taper Drills, Imperial Sizes

Skylarc Ref W132665

6x Large Diameter Morse Taper Drills, Imperial Sizes.
All have Morse Taper No. 4 size shanks.
Includes sizes:
1 11/16"
1 13/32"
1 19/32"
1 3/8"
1 9/16"
1 1/2"
Condition varies with each unit

Weldwell Maxi Mig 300PS Welder w/ Maxi Mig WD Unit

Skylarc Ref P132658

Weldwell Maxi Mig 300PS Welde.
Includes Maxi Mig WD Unit mounted on top.
3-Phase, 30A 500V plug.
Powered on only, not tested further.
Unit shows moderate industrial wear and usage.

Weldwell SteadyTig 330 Welder

Skylarc Ref R132660

Weldwell SteadyTig 330 Welder.
3-Phase, 30A, 500V.
Item shows typical industrial usage and wear.

6 x 1.95M Scaffolding Platforms with Doors

Skylarc Ref N133150

6 x 1.95M Scaffolding Platforms with Doors.
Platform Dimensions: 1950mm x 570mm.
225KG SWL.

3x Matching Wooden Parts or Tooling Storage Pigeon Hole Shelves

Skylarc Ref M132681

3x Matching Wooden Parts or Tooling Storage Pigeon Hole Shelves.
All appear custom built.
Each is approx 830mm wide, 310mm deep, 405mm tall.
Each storage hole is approx 80-85mm wide, 305mm deep, 85-88mm high.
Condition - All show moderate workshop dust, wear. All still sturdy construction. Some front labeling wood straps are broken, see photos.

6 (225KG) Scaffolding Platforms

Skylarc Ref K133147

6 (225KG) Scaffolding Platforms.
Platform dimensions: 1970mm x 570mm.
SWL 225KG.

10x Morse Taper Drills, Imperial & Metric Sizes

Skylarc Ref C132671

10x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.3 and No.4 size shanks.
Includes the sizes:
27.5mm
1 3/8" (2x, both with No.4 shanks)
59/64" (2x)
1 19/64"
1 3/16"
15/16"
1"
One unit with no visible size markings.
Condition varies with each unit. Most show tip sharpening.

4x Large Diameter Morse Taper Drills, Imperial Sizes

Skylarc Ref U132663

4x Large Diameter Morse Taper Drills, Imperial Sizes.
All have Morse Taper No. 4 size shanks.
Includes Imperial sizes:
1 27/32"
1 25/32"
1 7/8"
1 3/4"
Condition varies with each unit.

ESAB AB Twintig DTB 250 AC/DC Tig Welder

Skylarc Ref D133400

Model: ESAB AB Twintig DTB 250 AC/DC Tig Welder.
Three Phase
AC/DC Tig welding
32 amp three phase plug
Max 250 Amp Welding Output.

29x Morse Taper Drills, Imperial Sizes

Skylarc Ref I132677

29x Morse Taper Drills, Imperial Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
45/64" (4x)
47/64" (2x)
43/64" (2x)
11/16" (2x)
19/32" (6x)
13/16"
25/32"
9/16" (2x)
21/32" (2x)
29/32"
55/64"
13/64"
5/8"
Three units have no visible size markings.
Condition varies with each unit. All show tip sharpening wear

10x Morse Taper Drills, Imperial & Metric Sizes

Skylarc Ref A132669

10x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.3 size shanks.
Includes the sizes:
26.5mm
25.5mm (2x)
25mm
15/16"
1 3/16" (2x)
59/64"
Two units with no visible size markings.
Condition varies with each unit. Some show tip sharpening

ESAB Twintig DTB250 Three Phase Tig Welder

Skylarc Ref U133417

Model: ESAB AB Twintig DTB 250 AC/DC Tig Welder.
Three Phase
AC/DC Tig welding
32 amp three phase plug
Max 250 Amp Welding Output.

22x Morse Taper Drills, Imperial & Metric Sizes

Skylarc Ref J132678

22x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
19 5mm
17.5mm
17mm
41/64" (2x)
23/32"
21/32"
13/16" (6x)
19/32"
25/32"
7/8"
47/64"
9/16"
Two units have no visible size markings.
Condition varies with each unit. All show tip sharpening wear. Most units very short length.

8x Morse Taper Drills, Imperial Sizes

Skylarc Ref X132666

8x Morse Taper Drills, Imperial Sizes.
Morse Taper No. 4 and No.3 size shanks.
Includes sizes:
1 1/4"
1 5/16"
1 9/16"
1 5/32"
1 7/32"
1 3/32"
1 1/8"
One unit has unreadable size markings.
Condition varies with each unit. Some show tip sharpening.

Vintage Uryu Seisaku UW-22S Impact Driver, 3/4" Drive

Skylarc Ref S132713

Vintage Uryu Seisaku UW-22S Impact Driver.
3/4" Drive.
Made in Japan.
Shows moderate wear and usage.
Age of unit unknown.

ESAB Twintig DTB250 Three Phase Tig Welder

Skylarc Ref T133416

Model: ESAB AB Twintig DTB 250 AC/DC Tig Welder.
Three Phase
AC/DC Tig welding
32 amp three phase plug
Max 250 Amp Welding Output.

10x Morse Taper Drills, Imperial Sizes

Skylarc Ref Z132668

10x Morse Taper Drills, Imperial Sizes.
Morse Taper No.3 size shanks.
Includes sizes:
1 3/16"
31/32"
1"
61/64" (2x)
15/16" (5x)
Condition varies with each unit. Some show tip sharpening

Cigweld TransMig S3-C Welder w/ Wire Feeder

Skylarc Ref S132661

Cigweld TransMig S3-C Welder.
Includes Wire Feeder accessory unit.
3-phase 32A, 500V plug.
Condition - Wire Feeder wire reel mount is bent, see photos. Items show moderate industrial wear and usage.

15x Morse Taper Drills, Imperial Sizes

Skylarc Ref E132673

15x Morse Taper Drills, Imperial Sizes.
Morse Taper No.3 size shanks.
Includes the sizes:
31/32"
15/16" (11x)
1" (2x)
1 1/16"
Condition varies with each unit. Most show tip sharpening

ESAB Twintig DTB250 Three Phase Tig Welder

Skylarc Ref W133419

Model: ESAB AB Twintig DTB 250 AC/DC Tig Welder.
Three Phase
AC/DC Tig welding
32 amp three phase plug
Max 250 Amp Welding Output.

50 Ton Bottle Jack

Skylarc Ref X130846

50 Ton Bottle Jack.
Height adjusts from: 350mm to 525mm.
50 Ton Rated Capacity.
Lifting plate surface area: 74mm circumference.
Condition - Note the right lever is bent and does not move, also lifting handles are slightly damaged - see photos.

ESAB Twintig DTB250 Three Phase Tig Welder

Skylarc Ref V133418

Model: ESAB AB Twintig DTB 250 AC/DC Tig Welder.
Three Phase
AC/DC Tig welding
32 amp three phase plug
Max 250 Amp Welding Output.

15x Morse Taper Drills, Imperial & Metric Sizes

Skylarc Ref G132675

15x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
21mm
22mm
7/8" (3x)
57/64"
7/8"
15/16" (2x)
49/64"
55/64"
51/64"
13/16"
Two units have no visible size markings.
Condition varies with each unit. All show tip sharpening wear.

15x Morse Taper Drills, Imperial & Metric Sizes

Skylarc Ref H132676

15x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
20mm
18.5mm
18mm
15mm
25/32" (7x)
11/16"
29/32"
51/64"
One unit has no visible size markings.
Condition varies with each unit. All show tip sharpening wear

2 x 2.9M Scaffolding Platforms with Doors

Skylarc Ref M133149

2 x 2.9M Scaffolding Platforms with Doors.
Platform Dimensions: 2900mm x 600mm.
SWL 450KG.

10x Morse Taper Drills, Imperial Sizes

Skylarc Ref Y132667

10x Morse Taper Drills, Imperial Sizes.
Morse Taper No.3 size shanks.
Includes sizes:
13/32"
1 1/16" (2x)
1" (2x)
63/64" (2x)
61/64"
Two units have no visible size markings.
Condition varies with each unit. Some show tip sharpening.

32-Piece Vintage Thread Tap Set

Skylarc Ref R132686

32-Piece Vintage Thread Tap Set.
Length of each piece varies from approx 125mm to 170mm.
Items stored on a wood board 560x95x50mm.
Age of set unknown.
See photos for further design and type details.

16x Morse Taper Drills, Imperial & Metric Sizes

Skylarc Ref D132672

16x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.1 size shanks.
Includes the sizes:
14mm
7/16" (7x)
1/2" (2x)
15/32"
13/32" (3x)
17/32"
33/64"
One unit has no visible size markings.
Condition varies with each unit. Most show tip sharpening

Mill Vice by Abwood

Skylarc Ref V132716

Mill Vice by Abwood.
155mm wide jaws.
Jaws open up to approx 125mm.
Mounting bolt slots spaced approx 300mm apart on centre.
Drill holes in base of vice, see photos.
Vice crank is missing.

10x Morse Taper Drills, Imperial Sizes

Skylarc Ref B132670

10x Morse Taper Drills, Imperial Sizes.
Morse Taper No.3 size shanks.
Includes the sizes:
1 3/16" (3x)
15/16" (2x)
1 1/16"
15/16" (3x)
One unit with no visible size markings.
Condition varies with each unit. Most show tip sharpening, some have twisted shank tips.

AmPro Air Die Grinder

Skylarc Ref J130676

AmPro Air Die Grinder.
Model number unknown.
Tool shows industrial wear and usage.

Pair of Vintage Yellow Vehicle Lights

Skylarc Ref Q132685

Pair of Vintage Yellow Vehicle Lights.
Unknown age and what model or type of vehicle these are from.
Chrome metal housings approx 125mm diameter.
Condition - Chrome shows rusting. Yellow glass in excellent condition for its apparent age.

15x Morse Taper Drills, Imperial Sizes

Skylarc Ref F132674

15x Morse Taper Drills, Imperial Sizes.
Morse Taper No.3 size shanks.
Includes the sizes:
15/16" (6x)
1 1/4"
1 1/16"
Seven units have no visible size markings.
Condition varies with each unit. All show tip sharpening wear. Most very short length.

Air Power Reciprocating Saw

Skylarc Ref K130677

Air Power Reciprocating Saw.
Unknown msnufacturer and model.

Drill Tapping Chuck

Skylarc Ref T132714

Drill Tapping Chuck.
Model K-2.
Unsure of manufacturer, see photos.
Morse Taper No.3 mounting shank.

Assorted Used Commercial Vehicle Liggt Assemblies

Skylarc Ref N132682

Assorted Used Commercial Vehicle Liggt Assemblies.
Assorted brake/turn signal Assemblies, white reversing lights, emergency lights, and more.
Most show moderate to heavy wear. Many are damaged or missing components.
See photos fir further details on items included

Air 100mm Angle Grinder

Skylarc Ref O132709

Air 100mm Angle Grinder
Unknown drill manufacturer, model and age.
100mm max disk diameter.

Oxygen and Acetylene Welding Regulators

Skylarc Ref W132717

Oxygen and Acetylene Welding Regulators.
Unsure of manufacturer and models.
Both units show moderate wear and usage Acerylene gage has heat damage, see photos.

Air Drill w/ 10mm Keyed Chuck & Drill Press Attachment

Skylarc Ref P132710

Air Drill w/ 10mm Keyed Chuck & Drill Press Attachment.
Unknown manufacturer, model and age of Drill.
10mm Keyed Chuck, key is missing.
Length of Drill Press Attachment approx 250mm, diameter of base 120mm.

Trailer Front Jockey Wheel Assembly

Skylarc Ref Z132720

Trailer Front Jockey Wheel Assembly.
150mm diameter wheel.
Length adjustable.
Mounting plate approx 170x150mm.

Workshop Welding Gas Bottle Sack Barrel Trolley

Skylarc Ref Z119877

Workshop Welding Gas Bottle Sack Barrel Trolley.
Lifting plate approx 385x165mm.
200mm diameter wheels.
Handle height approx 1070mm.
Condition - Some moderate rust on Lifting plate.

DeWalt 184mm Corded Circular Saw DW368-XE

Skylarc Ref J130338

DeWalt 184mm Corded Circular Saw.
Model No. DW368-XE.
Uses 184mm diameter blades.
1800W
Saw shows moderate Workshop wear and usage.

Assorted Industrial Parts, Components, Fittings, Power Tool Assemblies, & More

Skylarc Ref Y132719

Assorted Industrial Parts, Components, Fittings, Power Tool Assemblies, & More.
Includes assorted pipe fittings, Filters, Valves, incomplete Bosch angle grinder, Bosch drill with damaged power cord, and other items. See photos for further details on items included.
Condition - All items show moderate to heavy wear, dust, etc.

Veeder-Root Hubodometer

Skylarc Ref S132687

Veeder-Root Hubodometer.
11.00x20
Item shows mild usage marks.

Air Polisher, 200mm Diameter

Skylarc Ref Q132711

Air Polisher,.
Unknown manufacturer, model and age
200mm disk Diameter.

Assorted Used Welding Regulators & More

Skylarc Ref X132718

Assorted Used Welding Regulators & More.
Most shoe moderate to heavy usage and wear. Assorted manufacturers and types. Also includes other welding related parts and components.

Veeder-Root Hubodometer

Skylarc Ref W132691

Veeder-Root Hubodometer.
Made in USA
7.50x16
Item shows mild usage marks

5x Assorted More Taper Drill Adapters

Skylarc Ref L132680

5x Assorted More Taper Drill Adapters.
No.4 to No.3 adapter.
No.3 to No.4 adapter.
One custom welded adapter with No.2 shank.
2x other Adapters with No.4 and No.3 shanks.
See photos for further design and type details.

3x Assorted Stanley & Stabila Branded Levels

Skylarc Ref O130343

3x Assorted Stanley & Stabila Branded Levels.
Includes:
- Stabila Type 86 610mm level.
- Stabila Type 87 610mm level.
- Stanley Type 43-500 level at 575mm length.
All units show moderate wear and usage. Electronic unit needs batteries to test.

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref J132704

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age. English made Jacobs Multi Craft Chuck No.U4G6I 10mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand

Hitachi 60mm Jig Saw CJ 60V

Skylarc Ref P130318

Hitachi 60mm Jig Saw.
Model No. CJ 60V.
0-3000rpm
Tool shows moderate Workshop wear and usage. Tool operates but not tested under load or at length.

Veeder-Root Hubodometer

Skylarc Ref Z132694

Veeder-Root Hubodometer.
Made in USA
8.25x20
Item shows mild usage marks

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref C132697

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age.
English made Jacob's Chuck No.32B 10mm Keyed Chuck, key is missing.
Jaws move by hand.

Veeder-Root Hubodometer.

Skylarc Ref T132688

Veeder-Root Hubodometer.
Made in USA
11.00x20
Item shows mild usage marks

Air Hex Screw Gun

Skylarc Ref B132696

Air Hex Screw Gun.
Unknown manufacturer, model and age.
8mm hex head size socket, see photos.
Item is untested.

Air Drill w/ 13mm Keyed Chuck

Skylarc Ref E132699

Air Drill w/ 13mm Keyed Chuck.
Unknown drill manufacturer, model and age.
English made Jacob's Chuck No.33B 13mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand but very stiff, would benefit from lubrication. Air hose attachment nipple is missing.

Veeder-Root Hubodometer

Skylarc Ref U132689

Veeder-Root Hubodometer.
Made in USA
7.50x16
Item shows mild usage marks

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref I132703

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age. English made Jacobs Chuck No.31B 10mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand.

4x Philips Commander TBS610 Luminaire Commercial Ceiling Lights

Skylarc Ref T132662

4x Philips Commander TBS610 Luminaire Commercial Ceiling Lights.
All units in white finish.
Exposed frame 595x595mm.
Fixture body size approx 560x560mm, depth approx 110mm..
Florescent tube length 550mm (tubes not included).
Includes 4x transparent covers.
Condition - Old unused stock. Two units are clean and appear as new. Two others show varying levels of dust and grime from years of open box storage. Transparent screens also show varying levels of storage dust. Age of lights unknown.

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref F132700

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age. 10mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand.

Veeder-Root Hubodometer

Skylarc Ref Y132693

Veeder-Root Hubodometer.
Made in USA
6.50x16
Item shows mild usage marks

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref D132698

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age.
English made Jacob's Chuck No.2B 10mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand.

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref L132706

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age. 10mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand only part way then stick, may need lubrication or servicing. Missing Air hose attachment nipple.

Veeder-Root Hubodometer

Skylarc Ref X132692

Veeder-Root Hubodometer.
Made in USA
11.00x20
Item shows mild usage marks

Air Drill

Skylarc Ref N132708

Air Drill
Unknown drill manufacturer, model and age.
See photos for Chuck type.

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref G132701

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age. English made Jacobs Chuck No K-10ACG 10mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand

Air Drill w/ 10mm Keyed Chuck

Skylarc Ref H132702

Air Drill w/ 10mm Keyed Chuck.
Unknown drill manufacturer, model and age. 10mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand only about half way open then stick, may need lubrication or servicing Some denting to drill body.