Engineering and Plant Auction

Microcut Challenger VM-1300 Machining Centre

Skylarc Ref T126240

Model: Microcut Challenger VM-1300
Table dimensions 1500mm x 660mm
X axis travel 1300mm
Y axis travel 710mm
Z axis travel 710mm
Max table load 1200kg
1000rpm spindle speed
BT40 spindle taper
15/20kw spindle
32 tool carousel
5 x 30mm T slots
Heidenhain iTNC-530 CNC controller
Spindle oil cooler
Chip conveyor
Manufactured June 2008
Manuals
PC with unknown software

MTE CNC Milling Machine

Skylarc Ref N125584

Model: MTE Kompakt Plus
Heavy duty universal CNC mill
Table dimensions 2200mm x 750mm
5 x T slots
50 DIN 2080 spindle taper
X axis travel 2000mm
Y axis travel 800mm
Z axis travel 800mm
Max weight on table 3000kg
Main motor power 15kw
Spindle speeds 40-2500rpm
Universal head
Heidenhain CNC controller
Hydraulic pump
Coolant pump
Assorted lockdown bolts
Manual
Manufactured 2001

To see a video of this machine running:
https://youtu.be/gBNpdDfJayU

Cigweld MPM 20/500 Diesel Genset Generator Welder

Skylarc Ref M125817

Cigweld Diesel Genset Generator Welder.
Model No. MPM 20/500 I-PS.
Serial No. 2709096.
Manufactured in 2007.
2264 run time hours.
2x 250V, 15A single phase power outlets and 1x 500V, 20A 3-phase power outlet.
100% = 400A, 36V
60% = 500A, 40V.
See photo of ID plate for further spec details.
Genset starts easily and sounds normal when running. Welding and power output functions not tested.

2006 Ford Transit 140 T350 Cargo Van

Skylarc Ref B124064

Model

Transit

Year

2006

Kilometres

278636

2006 Ford Transit 140 T350 Cargo Van.
278636kms.
Seats three people.
2.4L diesel engine.
6-speed manual.
Rear tyre tread depth approx 3.8mm and 5.4mm.
Front tyre tread depth approx 6.3mm and 6.2mm.
Rusty areas on body.
Some panels dented
Loose trim etc
Seat fabric holes and staining
Ex trades van
Freshly serviced however has engine warning lights on
OBD Errors include Turbo, Glow Pug, Relay for OBD2
Runs but has a range of issues
Ex liquidation maintenance history is unknown
Vehicle in generally rough condition

Maxport Three Phase Turret Milling Machine

Skylarc Ref X125100

Model: Maxport MM-216000
Manufactured 1989
Bed dimensions 1270mm x 250mm
3 x tee slots
Morse taper No.4 spindle
X axis powerfeed runs but doesn't move
Autofeed
Slideway lubrication doesn't work
2 speed ranges
70-500rpm
600-4200rpm
No DRO
3 hp spindle motor
Coolant pump
Fitted with Niraw 13mm keyless chuck

Top-Turn CNC-536L CNC Lathe

Skylarc Ref M125583

Model: Top-Turn CNC-536L
Distance between centers: 1825mm
Swing over bed: 536mm
Swing over cross slide: 305mm
Max spindle speed 1600rpm
7.5kw main spindle motor
Fagor 8055 controller
Four way adjustable tool post
310mm three jaw chuck
400mm four jaw chuck
Fixed steady
Box of chuck jaws
Manuals

For a video of this machine running:
https://www.youtube.com/watch?v=RCissJigbnk

Set of Renold Large Heavy Duty Tank Rollers

Skylarc Ref X124476

Renold heavy duty tank rollers
Size 7.0
7.5 kw drive motor
Ratio 136.05
520mm diameter rubber wheeled rollers
Overall length of each arm 4700mm
Adjustable roller position
Variable speed

Moriseiki Three Phase Lathe

Skylarc Ref D125574

Model: Moriseiki MS-850
Bed length 1400mm
Distant between centers approx 830mm
Swing over bed approx 250mm
12 spindle speeds
32rpm - 1800rpm
52mm spindle bore
Metric and imperial thread cutting
320mm three jaw chuck
320mm four jaw chuck
Traveling and fixed steadies
Morse taper No.4 tailstock
Foot pads
Foot brake
Coolant pump
Some change gears
Work light (not fitted)

To see a video of this machine running:
https://youtu.be/38Mo8uKzO7Y

20-Foot Shipping Container Convertion to Mobile Workshop

Skylarc Ref Z125882

20-Foot Shipping Container Convertion to Mobile Workshop.
Left door has 6mm steel table for mounting small machines. Power outlet on wall nearby.
Large hooks for hanging items
Enclosed steel shelf cabinet, can be locked with padlocks.
Heavy steel Workbench 3400x595x1005mm, with 12mm thick steel surface.
Irwin Record No.5 vice
Includes old microwave, fridge, chair and Whiteboard.
Rear wall heavy steel shelving.
Ceiling brackets for holding extension ladder.
Built in lighting and single phase power outlets.
See photos for further details on interior design and installed electrical hardware.

Heavy Duty Three Phase Plate Rollers

Skylarc Ref E125575

Model: A.B.Goteneds Mek Verkstad RME-5
Max capacity 6mm
2540mm wide rollers
Forward and reverse
Hydraulic rear roller raise and fall
Approx 210mm diameter rear rollers
Approx 180mm diameter front rollers

To see a video of this machine running:
https://youtu.be/PLP2DoY1KN4

Easy Access Ring Lock Mobile Scaffolding Equipment

Skylarc Ref C126145

Easy Access Ring Lock Mobile Scaffolding Equipment
4 x Ringlock Platoforms - 2400x550mm.
6 x Pairs of Cross Braces - Length: 2760mm.
2 x Pairs of Cross Braces - Length: 2560mm.
8 x 150mm Castor Wheels.
8 x Upright frames - 6 x H2240mm W1360mm, 2 x H960mm W1360mm.
8 x Ringlock Cross Beams - Length 2550mm.
2 x Ringlock Cross Beams - Length 2850mm.
2 x Ringlock Ladders 2950x360mm.

Tru Tool Colt Single Phase Metal Cutting Lathe

Skylarc Ref V126710

Tru Tool Colt Single Phase Metal Cutting Lathe.
Model - TY-7"x30" G.
178mm swing.
Max material length 762mm.
Single phase 240V, 50Hz.4A
1/2hp motor.
Includes 4x Chucks:
- 3-jaw Bernerd branded Chuck 125mm diameter, 30mm inner diameter, 72mm deep.
- 3-jaw Chuck. 110mm diameter, 25mm inner diameter, 67mm deep.
- 4-jaw Chuck 145mm diameter, 35m inner diameter, 80mm deep.
- 4-jaw Chuck 150mm diameter, 40mm inner diameter, 40mm deep.
Includes an assortment of other attachments, spare parts, accessories, and more. See photos for further details on Lathe design and included items.

20-Foot Shipping Container Conversion to Worksite Storage Room

Skylarc Ref A125883

20-Foot Shipping Container Converted to Worksite Storage Room.
Container manufactured in 1992.
Interior converted into a portable Worksite storage/work room.
Right Side heavy Duty welded steel Shelving Unit approx 3050mm long, 600mm wide.
At rear is lockable enclosed room with built in shelving and steel frame from hanging items.
Right Side interior is open for storing larger machinery or materials.
20A 3-phase and standard single phase power built into container.

Large Stanko Surface Grinder

Skylarc Ref O125585

Model: Stanko 3B722 Surface Grinding Machine
Magnetic chuck dimensions 900mm x 320mm
Table traverse 1050mm x 300mm
Variable feed rates 2 - 40 metres/min
450mm max grinding wheel diameter
Wheel vertical traverse 440mm
10 kw wheel motor
Coolant pump
Hydraulic power pack
Manual
4 extra grinding wheels

To see a video of this machine running:
https://www.youtube.com/watch?v=nu0w6O_Wgx0

Stanko Universal Milling Machine

Skylarc Ref Y125101

Model: Stanko 6T82III-1
Bed dimensions 1330mm x 320mm
X axis travel 800mm
Y axis travel 320mm
Z axis travel 400mm
Universal vertical head
10 vertical spindle speeds 50-1600rpm
NT40 vertical spindle taper
18 horizontal spindle speeds
31.5-1600rpm
NT50 horizontal spindle
22 table feed rates
Powerfeeds on all axis
Acu-Rite 3 digital read out
Horizontal 90 degree head
2 x horizontal arbors
Arbor supports
Heavy duty machine ready for work

BeltAir Pro 3-Phase 270L Air Compressor

Skylarc Ref F125862

BeltAir Pro 3-Phase 270L Air Compressor.
Model No. PRO270F7R400/3/50 MEPS.
Made in Italy in 2015.
5.5kW (7.5hp) motor.
270L tank.
3-phase 500V, 32A plug attached.
Includes 2x spare 300mm diameter wheels.
Condition - Unit appears to operate normally. One pressure gauge is damaged, see photo. Otherwise unit shows generally mild industrial usage.

Single Phase Bramley TT-20 Drilling & Milling Machine

Skylarc Ref X126712

Single Phase Bramley TT-20 Drilling & Milling Machine.
Electric Motor Specs:
Single Phase, 1 HP, 5.5A, 1500RPM, 50Hz, 4 Pole, 240V
Belt drive
8 Speed Settings 80 - 1920rpm
Table Specs:
Table Dimensions: 515x160mm.
Table Travel: x 310mm, y 160mm
Drill Specs:
Drill Travel: 100mm.
Includes Workshop Cupboard, machine can be mounted to top (as seen in photos) - machine serviceable height on cupboard: 1100mm.
Includes various parts - see photos.

Metalex Industrial Pipe Notcher PN-100S

Skylarc Ref T125226

Metalex Industrial Pipe Notcher.
Model No. PN-100S.
32A, 500V 3-phase powered.
Sanding belt width 75mm.

HMT Three Phase Turret Lathe

Skylarc Ref F125576

Model: HMT Type L22TP Preselector Turret Lathe
Distance between spindle nose and turret face 365mm
65mm spindle bore
Swing over bed 500mm
Swing over cross slide 300mm
Hexagonal turret
54mm holes in turret faces
12.5hp main motor
12 spindle speeds
32rpm - 1400rpm
10 feed speeds
Rapid traverse
Includes a range of tool holders
Turret collets
Die head
Manual
245mm diameter chuck

To see a video of this machine running:
https://www.youtube.com/watch?v=03mWiTW4FFg

Miller DeltaWeld 650 CY50 Welder w/ Wire Feeder & Cooling Unit

Skylarc Ref S125277

Miller DeltaWeld 650 CY50 Welder.
Includes Miller 70 Series Wire Feeder model S-74D.
Includes Coolmate 3 cooling unit.
3-phase, 32A, 500V plug attached.
Shows typical industrial wear and usage, see photos for further Condition details.

Precision Flat Steel Engineering Table

Skylarc Ref Z125258

Precision Flat Steel Engineering Table.
Manufactured in England in 1971 by Crown Windley Bros Ltd.
45mm thick steel top.
Plywood cover.
Heavy steel support frame.
Side Shelf holding assorted steel blocks, see photos.

Miller DeltaWeld 650 CY50 Welder w/ Cooler & Wire Feeder, Faulty

Skylarc Ref T125278

Miller DeltaWeld 650 CY50 Welder.
Includes Miller 70 Series Wire Feeder model S-74D.
Includes Coolmate 3 cooling unit.
3-phase.
Condition - Unit is labeled as faulty, reasons for fault and for which of the three components is unknown. Power plug is cut off. Otherwise unit shows typical industrial wear and usage, see photos for further Condition details.

Lincoln Electric PowerPlus II 350 Welder w/ Wire Feeder PWF-4gs

Skylarc Ref Q125275

Lincoln Electric PowerPlus II 350 Welder.
Includes attached Lincoln Electric PWF 4gs Wire Feeder.
3-phase, 500V, 32A plug attached.
Includes attached torch and Cabling.
Shows typical industrial wear and usage. Plastic wire casing cover on wire feeder is cracked, see photos.

Miller Dimension 562 Welder w/ Coolmate 3 & 60 Series attachments

Skylarc Ref L125270

Miller Dimension 562 Welder.
Includes Miller Coolmate 3 Coolant system.
Includes Miller 60 Series Wire Feeder model S-62.
3-phase 63A power plug cable attached.
Steel plate welded to one end for holding a bottle.

Lincoln Electric PowerPlus II 350 Welder w/ PWF 4gs Wire Feeder

Skylarc Ref P125274

Lincoln Electric PowerPlus II 350 Welder.
Includes attached Lincoln Electric PWF 4gs Wire Feeder.
3-phase, 500V, 32A plug attached.
Includes attached torch and Cabling.
Shows typical industrial wear and usage.

Lincoln Electric PowerPlus II 350 Welder

Skylarc Ref R125276

Lincoln Electric PowerPlus II 350 Welder.
Includes attached Lincoln Electric PWF 4gs Wire Feeder.
3-phase, 500V, 32A plug attached.
Includes attached torch and Cabling.
Shows typical industrial wear and usage.

Cosen Industrial Single Phase Band Saw

Skylarc Ref L125244

Coosen Industrial Single Phase Band Saw.
Model No. MH-916JA.
Manufactured in 2000.
230V single phase power.
Max material cutting width 500mm.
Condition - Electrical contact in rear electrical board needs replacing, otherwise machine will operate. Shows typical industrial wear and usage.

To see a video of this machine running:
https://www.youtube.com/watch?v=41Pg6F7mbpo

NT50 Adjustable Boring and Facing Head

Skylarc Ref M125609

Model: KKS 691143 UFB-5S NT-50 U5/8
NT 50 shaft
Wide range of tooling
In case with accessories
Top quality japanese tool

MepBlitz DC-15 Industrial Weld Cleaner w/ Trolley

Skylarc Ref V125280

MepBlitz DC-15 Industrial Weld Cleaner w/ Trolley.
Made in Australia.
Trolley has 400mm diameter tyres.
See photos for Included components and attachments.
Unit shows moderate industrial wear and usage.

Heavy Duty Steel Workbench

Skylarc Ref C125261

Heavy Duty Steel Workbench.
All steel construction.
Steel work surface approx 900mm above floor.
Record No. 3 vice included (some jaw damage to vice).
Lower inclosed Steel storage cabinet that can be locked with a padlock
Centre lower Steel divided shelf.
Lower right side Steel drawers with 3x drawers included (a 4th drawer is missing).
A very solid versitile Workbench.

4x Thick Solid Steel Plates

Skylarc Ref L125842

4x Thick Solid Steel Plates.
Each unit is comprised of two 960x600x60mm solid steel plates that are welded together along with two 50x50mm steel bars welded to bottom to provide space for fork lifting.
Four identical units in auction.
Estimated combined weight of around 2 Tons.
Items might be good for making four small very thick welding tables out of, or scrap value.

UniMig KT50 Welder w/ 425S Power Unit

Skylarc Ref U125279

UniMig KT50 Welder w/ 425S Power Unit.
3-phase 32A, 500V plug attached.
Inudes Grounding cable with clamp and hose with torch.
System shows typical industrial wear and usage.

Heavy Duty Workbench

Skylarc Ref D125262

Heavy Duty Workbench.
Sturdy steel frame with wood board work surface that is approx 935mm above floor.
Centre Steel drawer.
Lower shelves under work surface.
Small shelf attached to right side that is 720mm above floor.
Includes attached 125mm vice.

Stanny HBOR63 BT40 Micro Boring System

Skylarc Ref F125602

Stanny BT40 Micro Boring System
Model HBOR63
Includes:
BR1624-68
BR1620-65
BR1616-60
BR1614-50
BR1610-35
BR1608-28
BR1606-21
BJ2016-68
BM5(HBOR) adjustable boring
BT40 Adjustable holder
Assorted tool tips
Spanners
SRTP110150 boring mount
SRTP70110 boring mount
SRTP4468 boring mount
SRTP3652 boring mount
In case

Ruko RS10 Magnetic Stand Drilling Machine w/ Case

Skylarc Ref A125857

Ruko RS10 Magnetic Stand Drilling Machine w/ Case.
Drill measures approx 413mm to 548mm in height. Length 160mm, width 80mm.
Includes Steel case.
Drill operates normally.
Includes 3x Assorted drilling bits.
See the Ruko weblink below for further item details:
https://ruko.de/en/products/core-drilling-machines/108001RS

Industrial Hydraulic Pipe Bender Set

Skylarc Ref H125864

Industrial Hydraulic Pipe Bender Set.
Unknown manufacturer.
25-ton output.
Stroke 320mm.
8x bending attachments with diameter from 1/2" to 3".
Includes heavy Steel Trolley approx 1100mm long, 700mm wide, 1020mm high handle.

Industrial Crane Pallet Mover Attachment, 2200kg Capacity

Skylarc Ref M125245

Industrial Crane Pallet Mover Attachment.
2200kg max lifting Capacity.
Fork size 1055x100x45mm.
Adjustable fork spread from approx 350mm up to 900mm.

Heavy Steel Workbench

Skylarc Ref T125252

Heavy Steel Workbench.
3.5nm thick steel sheet top surface that rises approx 900mm above floor.
Lower steel sheet shelf.
Two steel drawers on right side. Slot for a missing third drawer.
A heavy and sturdy Workbench.

Miller Coolmate 3 Welding Cooling Unit

Skylarc Ref Z125284

Miller Coolmate 3 Welding Cooling Unit.
Single phase 115V.
For use with compatible Miller welding systems only.
Unit is untested.

6x Industrial Fibreglass Grated Flooring Panels

Skylarc Ref V125826

6x Industrial Fibreglass Grated Flooring Panels.
Each panel is approx 4010x1250x16mm.
Yellow colour.

725mm Steel Anvil w/ Stand

Skylarc Ref Y125231

725mm Steel Anvil w/ Stand.
Unable to read markings on unit so manufacturer unknown.
Anvil itself is approx 725mm long, 135mm wide on top work surface, and 310mm tall.
Anvil is mounted onto a 510x510mm square heavy Steel stand.

Custom Built Welding Material Rotator Machine

Skylarc Ref X126218

Custom Built Welding Material Rotator Machine.
Unit custom built to rotate Cylindrical materials/items while welding.
Single phase powered.
Old Lathe Chuck 300mm outside diameter, 100mm inner diameter.
Includes chuck Wrench.
Chuck head and motor Assembly can be rotated to adjust angle.
Distance from Chuck jaws to materiel support bar approx 750mm.
Material support bar is height adjustable.
Condition - Unit shows heavy industrial wear and usage. Speed dial is missing.

113x Industrial Rollers, Bulk Lot

Skylarc Ref P125820

113x Industrial Rollers, Bulk Lot.
Each roller is approx 330mm long (excluding centre shafts) and 125mm diameter. Lengths including shafts approx 375mm.
Each roller consists of a centre steel section with rotating outer unit of blue plastic or vinyl material.
Visible roller units show generally mild industrial usage. Lower unut in crate not inspected.
See our other listings for more bulk lots of these Rollers.

120+ Industrial Rollers, Bulk Lot

Skylarc Ref R125822

120+ Industrial Rollers, Bulk Lot.
Each roller is approx 330mm long (excluding centre shafts) and 125mm diameter. Lengths including shafts approx 375mm.
Each roller consists of a centre steel section with rotating outer unit of blue plastic or vinyl material.
Visible roller units show generally mild industrial usage. Lower unut in crate not inspected.
See our other listings for more bulk lots of these Rollers.

113x Industrial Rollers, Bulk Lot

Skylarc Ref Q125821

113x Industrial Rollers, Bulk Lot.
Each roller is approx 330mm long (excluding centre shafts) and 125mm diameter. Lengths including shafts approx 375mm.
Each roller consists of a centre steel section with rotating outer unit of blue plastic or vinyl material.
Visible roller units show generally mild industrial usage. Lower unut in crate not inspected.
See our other listings for more bulk lots of these Rollers.

Bramley 250 Cold Cut Saw w/ Mobile Stand

Skylarc Ref D125288

Bramley 250 Cold Cut Saw.
Model No. S250.
Made in New Zealand.
3-phase, 32A, 500V plug attached.
Mounted to a mobile frame.
Saw shows typical industrial wear and usage.

Tapmatic 70 TC/DC Reversable Tapping Attachment

Skylarc Ref E125705

Tapmatic 70 TC/DC Reversable Tapping Attachment.
Morse Taper No. 4 mount.

2.5-Ton Pile of Scrap Steel

Skylarc Ref E125835

2.5-Ton Pile of Scrap Steel.
Approx 10+ Individual pieces of steel. Largest is approx 1800x1800x50mm with large holes cut out of it.
Also a 1385x1285x40mm piece.
Other assorted offcuts and leftover pieces. Our 2.7T Forklift can just lift the pile so total weight of Steel pieces at least 2.5 ton.
See photos for further details.

Vintage Chubb Mechanical Combination Lock Safe

Skylarc Ref W126711

Vintage Chubb Mechanical Combination Lock Safe
Dial Combination Style Lock.
Internal Key Lockbox.
Includes adjustable/removable shelf.
Approximately 150L Capacity.
Approximately 140mm thick steel door and 60mm thick steel side walls.
Safe Internal Dimensions (not including lockbox)
520x460x525mm.
Lockbox Internal Dimensions:
450x385x190mm.
Includes keys to lock box, combination will be provided upon purchase.

Heavy Steel Topped Workbench

Skylarc Ref A125259

Heavy Steel Topped Workbench.
20mm thick steel plate top.
Heavy steel frame.
Enclosed lower storage compartment with hinged door.
520x290mm and 300mm high Elevated shelf on top left corner of bench.
See photos for further design details.

Stanny Micro Boring Head Kit

Skylarc Ref H125604

Model: Stanny NBH 2084 Adjustable Stainless Fine Boring Head
8mm - 280mm boring diameter
Boring bars include
BJ-2025-96
Unmarked 18.5mm
PINZBOHR S16/16-STPCR 09
Iscar 18.5mm
Stanny BR1612-14
Unmarked 15.8mm
New BJ2010-40
8 assorted partial boxes of tool tips
In case

Industrial 3-Phase Grinder

Skylarc Ref V125228

Industrial 3-Phase Grinder.
No ID label on unit so manufacturer and model unknown.
Uses 300mm diameter grinding wheels.
3-phase, 35A, 500V plug.
Safety guards missing.
Shows typical industrial wear and usage.

3M Speedglas/Adflo Welding Helmet and Respirator

Skylarc Ref O126131

3M Speedglas/Adflo Welding Helmet and Respirator.
Includes Welding Helmet, Respirator, bag and battery.
Does NOT include charger.

3M Speedglas Welsing Helmet and Respirator

Skylarc Ref T126110

3M Speedglas Welsing Helmet and Respirator.
Includes Helmet, Respirator, 2 batteries (1 in unit and 1 spare), 1 charger, and carrying Bag.
Please note batteries were charged and plugged in but unit did no power on, unsure as to why.

2 Tonne Mobile Girder Gantry

Skylarc Ref B125988

2 Tonne Mobile Girder Gantry.
Stratalign Branded.
2 Tonne Capacity.
Sitting on 4 hard rubber 170mm castor wheels.
Unit comes disassembled and is missing bolts to secure.

Heavy Cast Steel Workbench Table Top

Skylarc Ref D125834

Heavy Cast Steel Workbench Table Top.
Table approx 40mm thick cast steel.
115mm high sides.
No support frame or legs Included.
Items seen on top of unit are not included.
Very rusty from exterior storage.

3M Speedglas 9100 Welding Helmet and Respirator (Faulty)

Skylarc Ref Y125959

3M Speedglas 9100 Welding Helmet and Respirator (Faulty).
Full kit includes:
Spedglas 9100 Pivot Welding Helmet with Respirator.
Battery belt pack.
Battery Charger.
Carrying Bag.
And other various manuals and accessories (see photos).
Please note that this unit does NOT power on, battery was charged for approximately 3 hours but would not light up when power button was pressed.

Heavy Duty Steel Topped Workbench

Skylarc Ref Y125257

Heavy Duty Steel Topped Workbench.
20mm thick steel plate work surface approx 920mm above floor.
Includes Record No. 5 vice.
Heavy sterl frame with lower plywood shelf.
Slot for a small drawer underneath (drawer is missing).
700mm high wood backboard with hooks and small shelves for Tooling.
See photos for further design details.

Rex N50A Pipe Threading Machine w/ Trolley

Skylarc Ref E125289

Rex N50A Pipe Threading Machine.
Single phase.
Includes 600x530x635mm Trolley with storage for accessories.

Heavy Duty Workbench

Skylarc Ref E125263

Heavy Duty Workbench.
Workbench is made from a section of industrial pallet Racking as a frame.
Top work surface OS a 25mm thick MDF board with 1mm thick steel sheet overtop.
Includes attached Record/Irwin No. 5 vice.

Single Phase Metal Cutting Band Saw by 7RU

Skylarc Ref P126288

Single Phase Metal Cutting Band Saw.
7RU branded.
Model No. RF-115
Bed width 203mm.
Cutting capacity - 114mm round or 100x150mm rectangular.
Blade size 12.7mm x 1638mm.
1/2hp single phase motor.
Operates normally.

10x Assorted Steel Wire Grating

Skylarc Ref J125840

10x Assorted Steel Wire Grating.
Assorted wire Thicknesses from approx 4mm up to 8mm.
Sheets range in size from approx 2000x870mm up to 2400x2100mm.
Rusty from exterior storage.

Large Milling Machine Vice

Skylarc Ref M125973

Heavy Duty Industrial Mill Vice
260mm Jaws
270mm Max opening
No handle
See last photo for other dimensions

Lincoln Electric IdealArc R3R 500-I Welder

Skylarc Ref N125272

Lincoln Electric IdealArc R3R 500-I Welder.
Cables with welding head and Grounding clamp.
3-phsse, 32A power plug.
Welding head is cracked, see photos.

Mitutoyo Adjustable Micrometer

Skylarc Ref D125678

Mitutoyo 6"-12" adjustable micrometer
No.7231697
Interchangeable rods
Test blocks
Wooden case

Universal Lathe Dividing Head Chuck by News

Skylarc Ref H126306

Universal Lathe Dividing Head Chuck by News.
Made in Japan by News, Yamatokoki Co.
Jainson branded Chuck outer diameter approx 100mm, inner diameter 20mm.
Includes chuck key.
Includes Dividing plates set in wood case.
See photos for further design and condition details.

3x Heavy Steel Disks, 27mm Thick, 1100mm Dia

Skylarc Ref R125588

3x Heavy Steel Disks.
Each Steel disk is approx 27mm Thick and 1100mm Diameter.
Rusty from exterior storage

15x Stackable Industrial Storage Racks Stilages

Skylarc Ref H125838

15x Stackable Industrial Storage Racks Stilages.
Each unit is formed of 50x50mm steel lengths. Each unit is approx 900mm long, 750mm wide, 510mm tall.
Auction includes 15x units.
Condition - All units are in rough condition showing moderate rusting, some bent frames, wood Shelving boards severely weathered and rotten. See photos for further details.

Optimum B17 Pro Bench Drill

Skylarc Ref L126102

Optimum B17 Pro Bench Drill.
16mm Drilling Capacity (Steel).
2MT Spindle.
500-2520RPM (5 Speed).
65mm Spindle Travel.
Table dimensions: 235mm x 225mm.
-45° to +45° Table tilt.
0.5KW Motor.
The B17 is suitable for mounting on benches 750-900mm high.

Heavy Steel Workbench, Custom Unique Design

Skylarc Ref U125253

Heavy Steel Workbench.
Custom built unit.
20mm thick steel plate work surface approx 895mm.above floor and approx 1800mm long, 1040mm wide.
Upper rear frame with a unique array of storage attachments with a hose/cabling Holder on left side, an Elevated 2000x2250mm shelf, a enclosed 570x410x400mm storage compartment on right side and an upper steel frame for hanging various tools etc.
Lower frame for a drawer (drawer unit is missing).
Below is a lower shelf comprised of various scrap steel pieces welded together.
Includes Dawn No. 5SP vice.
See photos for further details on the sturdy uniquely designed Workbench.

44M 3 Phase 32Amp-20Amp Extension Lead

Skylarc Ref K126101

44M 3 Phase 32Amp Extension Lead

11x Stackable Industrial Storage Racks Stilages

Skylarc Ref K125841

11x Stackable Industrial Storage Racks Stilages.
Units are formed of 50x50mm steel lengths.
6x units are approx 1800 long, 750mm wide, 990mm tall.
5x units are approx 1800mm long, 750mm wide, 525mm tall. These five units have wood board shelf surfaces.
Auction includes 11x total units.
Condition - All units are in rough condition showing moderate rusting, some bent frames, wood shelving boards weathered and rotten. See photos for further details.

Large Assortment of Welding Mats

Skylarc Ref L126128

Large Assortment of Welding Mats.
22 welding mats of varrying shape, size, colour and condition.
Please see photos.

Heavy Industrial Steel Heater / Oven

Skylarc Ref T125824

Heavy Industrial Steel Heater / Oven.
Unsure as to this unit's purpose.
Unit appears to be custom built.
Main circular top disk and Cylindrical sides are 20mm thick steel.
A Teco EV Series inverter motor speed regulator unit is installed in a side compartment.
A Corded remote control unit is attached.
Unit is connected to a steel beam that was cut off during removal.
See photos for further details on this unit and its possible function.

120+ Industrial Rollers, Bulk Lot

Skylarc Ref S125823

120+ Industrial Rollers, Bulk Lot.
Each roller is approx 330mm long (excluding centre shafts) and 125mm diameter. Lengths including shafts approx 375mm.
Each roller consists of a centre steel section with rotating outer unit of blue plastic or vinyl material.
Visible roller units show generally mild industrial usage. Lower unut in crate not inspected.
See our other listings for more bulk lots of these Rollers.

Long CNC Lathe Turning Tool and Tips

Skylarc Ref S125641

Long CNC tool holder
180mm long excluding interchangeable end
C4-570-3C 32 154
Three interchangeable ends
B579.0C-323222-16
NR-32-12-L
R571.05C-323322-11

Heavy Duty Workbench

Skylarc Ref G125265

Heavy Duty Workbench.
Bench frame is comprised of a section of industrial pallet Racking.
Work surface is a 25mm thick MDF board with a 1mm thick steel sheet covering.

Mitutoyo Digital Height Gauge in Case

Skylarc Ref X125646

Model: Mitutoyo Absolute Digimatic Heightgage HDS
0-320mm
With box and manual

40+ Assorted Milling Gear Cutters

Skylarc Ref Q125769

40+ Assorted Milling Gear Cutters.
Assorted manufactures and sizes, see photos for further details.
Condition - All are very dirty from workshop storage. Teeth condition varies with each unit. Some surface rust spotting on many units.

Heavy Duty Workbench

Skylarc Ref J125268

Heavy Duty Workbench.
Frame is comprised of a section of industrial pallet Racking.
Top work surface is a 25mm thick MDF board with a 1mm thick steel top surface.

Large Insert Drill

Skylarc Ref I125605

Sandvik Coromant 880-D5200L40-02
51mm cutting diameter
40mm shaft
With box

Heavy Steel Workbench Work Table

Skylarc Ref Q125249

Heavy Steel Workbench Work Table.
Very heavy steel frame with thick steel top plate.
Appears to be an older unit.
Some surface rusting.
Work surface approx 1140x695mm and 730mm above floor.

Davey Petrol Firefighter Pump 5150HD

Skylarc Ref S125849

Davey Petrol Firefighter Pump.
Model No. 5150HD
Powered by a Honda GP160 petrol engine.
Includes original box.
Includes a length of fire hose.
Not tested as appropriate water input not available at our location.
See the Davey weblink below for further item details:
https://www.daveywater.com/nz/product/petrol-engine-driven-davey-firefighter

Engineering Mill Vice

Skylarc Ref C125963

Engineering Mill Vice.
Jaw Width: 155mm.
Jaw Depth: 55mm.
Jaw opens to: 300mm.
Mounting slot distance: 165-225mm.
Mount slot size: 30x20mm.
3 Jaw opening locking points: 100-200-300mm.

BOC Masterstart Acetylene Torch Kit

Skylarc Ref L125998

BOC Masterstart Acetylene Torch Kit.
Comes with 5 assorted torches, 3 vavle regulators/gauges, 1 Acetylene/Oxygen Hose 8M+ length and assorted associated parts - see photos.

Milling Machine Rotary Table

Skylarc Ref T125954

Milling Machine Rotary Table.
Unknown Make.
350mm Diameter Table.

Antique Ace Solder Spray Gun Kit

Skylarc Ref Z126298

Antique Ace Solder Spray Gun Kit.
Made in England.
Ace Accessories price list add included in case states a date of June 1, 1936.
See photos for further details on Condition of items.

Large 3-Phase Industrial Tumbler

Skylarc Ref N125818

Large 3-Phase Industrial Tumbler.
Custom built unit.
500V, 32A power cord with plug end.
Heavy steel drum resting on 550mm diameter tyres.
Drum is approx 1800mm long, 630mm diameter. See photos for details on design of interior of drum.
Condition - Custom built unit showing moderate surface rusting. Tyres need air. Unknown if unit is functioning.

8x Assorted Industrial Fibreglass Grated Flooring Panels

Skylarc Ref W125827

8x Assorted Industrial Fibreglass Grated Flooring Panels.
Assorted sizes, longest approx 3650mm, widest approx 1220mm.
One unit is approx 15mm thick, all others are approx 40mm thick.
Smallest piece 920x640mm
Others are a mix of various sizes and shapes.

Large Steel I-Beam Frame

Skylarc Ref F125836

Large Steel I-Beam Frame.
Upper horizontal I-beam 1920x310x320mm.
Lower horizontal I-beam 2330x310x320mm.
Appears to have been built for a specific unknown purpose. See photos for further details on frame design.

Hydraulic Body/Frame Repair Kit (10 Tonne)

Skylarc Ref F125992

Hydraulic Body/Frame Repair Kit (10 Tonne).
All parts seen in photos included.
Lifting range: 150mm.

4x Anti Fatigue Rubber Workshop Floor Mats

Skylarc Ref R126264

4x Anti Fatigue Rubber Workshop Floor Mats.
Each is approx 1520x915mm.
Condition - 3x units are as new unused leftover Workshop supply stock still wrapped unopened from old supplier. The fourth mat is dusty from some mild usage, see photos.

Pacific Hoists 3.2T Lever Chain Block

Skylarc Ref P125898

Pacific Hoists 3.2T Lever Chain Block.
Model No. PLB332.
1.5m lift.
10x28mm G80 chain.

Pair of 4M Grab Hook Lifting Chains

Skylarc Ref C126119

Pair of 4M Grab Hook Lifting Chains.
3.15 Ton Capacity

Heavy Duty Steel Plate Topped Workbench

Skylarc Ref H125266

Heavy Duty Steel Plate Topped Workbench.
Appears to be custom built.
18mm thick steel plate top surface.
Under work surface are assorted brackets for mounting drawers as well S hooks and slots for hanging tools etc. See photos for further design details.
Drawers are missing.

3M Speedglas Welding Helmet and Accessories

Skylarc Ref E125965

3M Speedglas Welding Helmet.
Includes Welding Helmet and two bags.

Belt & Disk Sander by Power Command w/ Stand

Skylarc Ref Q125561

Belt & Disk Sander by Power Command w/ Stand.
Model No. SBD2315
Single phase 240V.
750W
Sanding belt 150x1220mm.
Disk diameter 229mm.
Mounted on a 700mm tall heavy Steel stand.
Unit shows typical industrial wear and usage.

150mm - 255mm Metric Micrometer Set

Skylarc Ref Y125647

Large metric external micrometer
Test blocks
Interchangeable stems
In case

Sandvik Coromant CoroDrill 880 Indexable Insert Drill and Inserts

Skylarc Ref U125903

Sandvik Coromant CoroDrill 880 Indexable Insert Drill and Inserts.
880-D3800L40-02 Drill x 1.
880-06 04 W08H-P-LM 4024 Inserts x 9.
880-06 04 06H-C-LM 1044 Inserts x 9.

Heavy Duty Steel Topped Workbench

Skylarc Ref W125099

Heavy Duty Steel Topped Workbench.
2mm thick steel work surface approx 930mm above floor.
MDF back board for hanging tools rising 1060mm above work surface.
Lower cabinet with steel sheeting panels on ends and 2mm steel panel sliding front doors.
Inner removable 4-drawer steel drawer unit on right side, inner shelving on left side.
Heavy duty sturdy unit.

Heavy Duty Workbench

Skylarc Ref F125264

Heavy Duty Workbench.
Frame is comprised of a section of industrial pallet Racking.
Top work surface is a 25mm thick MDF board with a 1mm thick steel covering.

Large Norbar Torque Wrench

Skylarc Ref U125643

Norbar Model H 4R
100 - 500 lbf-ft
3/4" drive
Certified till 17/12/2012

3-phase 255mm Industrial Bench Grinder w/ Stand

Skylarc Ref X125282

3-phase 255mm Industrial Bench Grinder w/ Stand.
A. R. Christian Ltd, Brook Motors Ltd branded.
3-phase 220-230V (4-wire cable).
Uses up to 255mm diameter grinding wheels.
Condition - Older unit showing moderate industrial wear. Electrical Cable end is missing plug. Control box needs repair.

Ryobi Model HBT250 254mm Combination Home Workshop

Skylarc Ref A126715

Ryobi Model HBT250 254mm Combination Home Workshop.
Mounted to home made platform trolley.
Comes with manual, belt and other parts - see photos.

Large Office Bookshelf Cabinet Unit

Skylarc Ref V125254

Large Office Bookshelf Cabinet Unit.
30mm thick MDF boards Laminated with Faux Wood and of-white surfaces.
6x open adjustable shelves each approx 490x380mm.
3x lower enclosed cupboards each with one adjustable shelf.
Note - Most shelf support pins are missing.
Condition - Heavy, sturdy unit. Some surface marks, dirty fingerprints etc, would benefit from a surface clean. Lower front left edging loose.

Antique Heavy Press

Skylarc Ref O126287

Antique Heavy Press.
Unknown manufacturer and age.
Partial brand symbol visible on unit, see photos for details.
Pressing plate is approx 377x255mm and opens up to approx 72mm.
Heavy steel or iron construction with large brass knobs on both ends of handle.
Condition - press operates smoothly and easily despite its apparent age. Exterior surfaces would benefit from a restoration.

Lathe Pipe Threading Taping Chuck w/ Assorted Inserts

Skylarc Ref S126239

Lathe Pipe Threading Taping Chuck w/ Assorted Inserts.
Unknown Chuck manufacturer or model. Only visible marking on Chuck is 11/2703.
Outer Chuck face diameter 120mm, inner diameter approx 50mm.
Miunting shank 100mm long, 55mm diameter.
Includes 25x sets of Threading teeth, also 30x loose teeth, see photos.

Engineers Milling Machine Vice

Skylarc Ref K125971

Engineers Milling Machine Vice.
Jaw Width: 150mm.
Jaw Depth: 45mm.
Jaw Opens To: 210mm.
Mounting point distance: 180-230mm.
Mounting point size: 25x18mm.

Heavy Duty Workbench w/ Lockable Tool Storage

Skylarc Ref X125256

Heavy Duty Workbench.
Painted wood work surface approx 925mm.above floor.
Lower wood board shelf.
2x wooden drawers underneath.
Heavy steel frame.
700x480mm shelf added to right side.
Record No. 6 Vice included.
Main feature is the 1555x290x910mm enclosed tool storage cabinet with multiple hooks for tools. Vertical sliding door can be locked with a padlock.
Condition - Enclosed cabinet door rope raising pulley mechanism has been cut and bent from removal from its original location, see photos. Unable to fully open door as a result. This will need to be rewelded and repaired to fully use door. Otherwise Workbench unit in good nick showing just typical workshop wear and usage.

Nikon AC2S Automatic Level with Topcon Tripod

Skylarc Ref M125999

Nikon AC2S Automatic Level with Topcon Tripod
Leveling Type: Wire-hung magnetic compensator
Magnification: 24x
Objective Diameter: 30mm
Minimum Focus: 0.75m
Accuracy: +/-2.0mm (1km double leveling run)
Weight: 1.22kg
Weather Protection: IP52
See photos for calibration details.

Sandvik Coromant CoroDrill® 880 Indexable Insert Drill

Skylarc Ref T125902

Sandvik Coromant CoroDrill® 880 Indexable Insert Drill.
880-D4000L40-02.
Includes protective case and two inserts.

Pair of Heavy Duty Industrial Rollers w/ Stands

Skylarc Ref W125229

Pair of Heavy Duty Industrial Rollers w/ Stands.
Each roller is approx 755mm long, 100mm diameter.
Each is mounted on a heavy steel frame. Each frame is approx 900mm long, 800mm wide.
Height of Rollers is adjustable, current height is approx 830mm.
Condition - Both units show industrial wear and usage, surface grime etc. Both rollers roll fine.

NT50 Tool Holder w/ Sandvik Coromant Attachments

Skylarc Ref F125732

NT50 Tool Holder w/ Sandvik Coromant Attachments.
Includes the following components:
- NT50 Type Tool Holder marked C6-390.00-50 080.
- Sandvik Coromant attachment type 391.38A-0-096 022A
- Sandvik Coromant type 391.38A-2-046 28 048A.

Alco Industrial Extension Ladder (150KG 3-6M)

Skylarc Ref N125688

Alco Industrial Extension Ladder (150KG 3-6M).

Large Assortment of Welding Cables

Skylarc Ref M126103

Large Assortment of Welding Cables.
Please see photos.to get an idea of types, sizes and quantities.

Engineering Mill Vice

Skylarc Ref A125961

Engineering Mill Vice.
Jaw Width: 155mm.
Jaw Depth: 55mm.
Opens to: 300mm.
Mounting slot distance: ~165-225mm.
Mount slot size: 30x20mm.
3 jaw opening locking points (100-200-300mm).

Pacific Hoists 3.2T Lever Chain Block

Skylarc Ref Q125899

Pacific Hoists 3.2T Lever Chain Block.
Model No. PLB332.
1.5m lift.
10x28mm G80 chain.

Height Gauge

Skylarc Ref V125644

Model: Kanon F173
300mm height gauge
In box

Set of Assorted ER32/40 Collets

Skylarc Ref K125945

Set of Assorted ER32/40 Collets.
23 x ER40 Collets, Sizes Ranging from: 1/32" to 31/32".
11 x ER35 Collets, Sizes Ranging from:1/32" to 1/2".
Also includes 5 Assorted tool holder locking screws and wooden carrying case.

Linishall 150mm Industrial Bench Grinder

Skylarc Ref J125710

Linishall 150mm Industrial Bench Grinder.
Model No. BG6.
Uses up to 150m diameter grinding wheels.
450W
2850rpm.
240V single phase.
Includes safety screens, cooling tray, original box.
Condition - Grinder appears near new showing very minor signs of breif use, mainly just some light grinding dust residue. Workshop initials have been etched into body.

Reamer Pilot Set

Skylarc Ref I125657

Warren and Brown Reamer Guides
Set of 9
One incomplete
In case

BW Tech Gas Alert MicroClip XL Gas Detector

Skylarc Ref D125704

BW Tech Gas Alert MicroClip XL Gas Detector.
Includes charging adapter and original box.
Unit indicates that it needs calibration, see photos.
Shows typical industrial wear and usage.

29M 3 Phase 32Amp Extension Lead

Skylarc Ref J126100

29M 3 Phase 32Amp Extension Lead.

Makita HP2010N 13mm 2‑Speed Hammer Drill

Skylarc Ref H125994

Makita HP2010N 13mm 2‑Speed Hammer Drill.
Make: Makita
Model: HP2010N
Amps: 3.3A
Voltage:
Hz: 50/60
Watts: 750
2300RPM No Load Speed.
Includes carrying case, chuck key and various drill bits - see photos.

Alco Industrial Aluminium Extension Ladder

Skylarc Ref C125885

Alco Industrial Aluminium Extension Ladder.
Made in NZ.
Length from 4.90m to 8.5m.
130kg max load capacity.

Moore and Wright Precision Square

Skylarc Ref K125659

Moore and Wright Square
530mm x 260mm
With wooden case

20x Assorted Industrial Fibreglass Grated Flooring Panels

Skylarc Ref X125828

20x Assorted Industrial Fibreglass Grated Flooring Panels.
Assorted sizes, longest approx 3650mm, widest approx 1220mm.
Thicknesses vary from 15mm to 40mm.
Wide variety of sizes and shapes.

Antique Workshop Press

Skylarc Ref S126317

Antique Workshop Press.
Unknown manufacturer and age.
Geared press bar approx 290mm long.
See photos for further details on design and condition of unit.

1250kg Capacity Folding Engine Crane

Skylarc Ref U125227

1250kg Capacity Folding Engine Crane.
SCA branded.
500kg, 750kg, 1000kg, and 1250kg beam length settings
Includes a second longer set of base soppirt beams (Note that one beam is missing its wheel).
Crane shows typical workshop wear and usage. Crane hydraulics operate but not tested under load.

Pallet of Assorted Nuts, Bolts, Washers, & Other Fastening Hardware

Skylarc Ref S126213

Pallet of Assorted Nuts, Bolts, Washers, & Other Fastening Hardware.
Also includes assorted threaded rod, lengths of chain, brass fittings, clamps, screws, etc.
Includes assorted sizes of Lamson branded plaftic parts bins plus 3x wall mounted steel boards for mounting some bins.
See photos for further details on Included items.
Condition varies with each item. Most are unused, some show usage.

Sandvik Coromant 880-D3400L40-02 Insert Drill

Skylarc Ref Y125985

Sandvik Coromant 880-D3400L40-02 Insert Drill.

Massive Antique Collection of Model Engineer Magazine, 1930 to 1991

Skylarc Ref N126286

Massive Antique Collection of Model Engineer Magazine, 1930 to 1991.
Thousands of Model Engineer Magazines, appears to possibly be a complete, or very near complete, collection of every publication from January 2nd 1930 to January 3rd, 1991. Way to many to count or verify exact number.
Also a number of extra copies of various years as well.
Obviously we can't inspect every copy but overall it appears they were stored upon puchace as most that we inspected appeared in excellent condition, though many of the 1930's and 40's have rusty staples and mild frayed edges.
Includes Precision branded 5-drawer storage cabinet.
A excellent likely complete collection for a museum or antique magazine Collector.

CNC Lathe Turning Tool

Skylarc Ref Y125621

Sandvik Coromant
C4-STFCR-11070-11

Fiac Single Phase Air Compressor

Skylarc Ref E125991

Fiac Single Phase Air Compressor.
10/145 max Bar/PSI.
257L/Min Pump Displacement.
174L/Min Free Air Delivery.
Note there is slight damage to the case on top of the electric motor and the tires are flat (see photos).

Large Assortment of Weldwell Arc Welding Electrodes

Skylarc Ref J126126

Large Assortment of Weldwell Arc Welding Electrodes.
17 Partial cartons of general purpose arc welding electrodes.
2 partial cartons of Weldwell stainless steel electrodes.
Please see photos to get an idea on qty and condition.
Note the contents have not all been confirmed, there could be mixed types/partial units in the cartons.

Assorted Lot of Brass, Copper & Steel Material Rods & Sheets

Skylarc Ref S126811

Assorted Lot of Brass, Copper & Steel Material Rods & Sheets.
Includes:
- 16x Hollow brass box rods, each is 9.5x9.5mm square with lengths varying from approx 2180mm to 2340mm.
- 2x L-Shaped brass rods, each side 9.4x9.4mm and lengths of both pieces 900mm.
- 1x solid brass rod 6.4x6.4mm square and 785mm long.
- 1x Copper sheet 3mm thick and 1200x310mm in size.
- 1x brass sheet 0.8mm thick and approx 543x500mm in size (with two small sections cut out, see photos).
- 3x Steel lengths each 4030mm in length and 13mm wide, 3.2mm thick
Can filled with assorted short cutoff lengths of brass and steel lengths, Copper sheets.
See photos for further details on items included.
Items are leftover home workdhop supply stock.

Engineers Milling Machine Vice

Skylarc Ref L125972

Engineers Milling Machine Vice.
Jaw Width: 150mm.
Jaw Depth: 45mm.
Jaw Opens To: 210mm.
Mounting point distance: 180-230mm.
Mounting point size: 25x18mm.

Large Assortment of Ratchet Tie Downs

Skylarc Ref M126129

Large Assortment of Ratchet Tie Downs.
Various sizes and lengths.
25 Ratchets.
23 Tie down reels.

Pair of Petzl Newton EasyJet Fall Arrest Harnesses

Skylarc Ref B126118

Pair of Petzl Newton EasyJet Fall Arrest Harnesses.
Both size 2.
Note these will need to be certified before use.

Sandvik Coromant T-Max Indexable Milling Cutter R265.2-250M

Skylarc Ref S125563

Sandvik Coromant T-Max Indexable Milling Cutter.
Type No. R265.2-250M.
Includes 5x cases of Assorted compatible Indexes.
Includes case.
Cutter shows some wear and usage, see photos.

23x Assorted Lengths of Horizontal Pallet Racking Rails

Skylarc Ref K125269

23x Assorted Lengths of Horizontal Pallet Racking Rails.
Includes the following sizes:
- 10x 2135x90x50mm.
'- 9x 2135x80x45mm.
- 2x 2745x90x50mm.
- 2x 2745x80x45mm.
- 1x unit that has been cut into two parts each 720mm and 1415mm, see photos.

Makita Abrasive Cut-off Saw LW1400

Skylarc Ref B125858

Makita Abrasive Cut-off Saw.
Model No. LW1400.
Uses 355mm diameter disks.
2400W.

Vintage Heavy Duty Soviet Milling Machine Vice

Skylarc Ref I125969

Vintage Heavy Duty Soviet Milling Machine Vice.
Make: Baranovichi Factory Machine Accessories.
Factory: 752.
Manufacture Date: 1973.
Made in: USSR.
Jaw Width: 250mm.
Jaw Depth: 80mm.
Jaw Opens to: 345mm
Mounting point distance: 370-450mm.
Mount slot size: 40x20mm.
Missing handle

Pair of Vintage Industrial Calipers

Skylarc Ref F125680

Pair of Vintage Industrial Calipers.
1 unit Opens to 1725mm.
1 unit Opens to 650mm.

Lathe Pipe Threading Taping Chuck w/ Assorted Inserts

Skylarc Ref L126700

Lathe Pipe Threading Taping Chuck w/ Assorted Inserts.
Unknown manufacturer or model.
Chuck face approx 90mm diameter. Inner diameter approx 35mm.
Mounting shank 65mm long, 40mm diameter.
Includes assorted sets and loose pieces of cutting teeth, see photos.

Iscar Indexible Lathe Turning Tool PDJNR 2525M-11

Skylarc Ref B125780

Iscar Indexible Lathe Turning Tool.
Part No. PDJNR 2525M-11
Includes case of 9x spare Inserts.

4.2T Multi Leg Lifting Chain

Skylarc Ref G126201

4.2T Multi Leg Lifting Chain.
1.8m chain length.
10mm chain diameter.
Single leg load 3.15T.
Multi leg load 4.2T.

NEW Bosch 180mm Angle Grinder GWS 24-180 LVI

Skylarc Ref Z125544

NEW Bosch 180mm Angle Grinder GWS 24-180 LVI.
Note this unit is new out of the box but has been Branded with SCE branding.
No Load Speed: 8.500rpm.
Rated Input Power2,400 W.
Grinding Spindle Thread: M14.
Main Handle: Bow (rotating).
Disc Diameter: 180 mm.
Switch Type: PROtection.
Accessories included: Back Flange, Vibration Control Auxiliary Handle, Locking Nut, Quick Adjustment Protective Guard, and Two-hole Spanner.

Industrial Bench Grinder w/ Stand

Skylarc Ref S125225

Industrial Bench Grinder w/ Stand.
Manufactured by MEC Engineering.
Worn ID label so unable to read specs.
Unknown model number.
Single phase.
Can accomadate grinding wheels up to approx 200mm diameter.
Mounted on a heavy steel 920mm tall stand.
Condition - Appears to be an older model showing Workshop wear and surface grime. Some safety guards are missing, see photos.

Mitutoyo External Micrometer Set

Skylarc Ref B125676

Mitutoyo 4"-8" micrometer set
No.104-150A
Interchangeable tips
Test blocks
Spanner
Wooden case

Manual Lever Operated Shapping Machine

Skylarc Ref B126716

Manual Lever Operated Shapping Machine.
Table dimensions: 275x220mm.
Mounted to solid steel pedestal - can be removed.
Comes with assorted tooling.

7.5T Multi Leg Lifting Chain

Skylarc Ref F126200

7.5T Multi Leg Lifting Chain.
2m long chain.
13mm chain diameter.
Master link approx 235x170mm.

Industrial Pallet Jack

Skylarc Ref O125273

Industrial Pallet Jack.
Unable to read ID label so manufacturer and max lifting Capacity is unknown.
Fork length 1140mm, fork width 160mm.
Gap between forks 235mm.
Forks raise from approx 50mm up to approx 160mm.
Jack appears to operate normally. Shows typical industrial wear and usage.

Heavy Duty Workshop Divider Wall

Skylarc Ref E125237

Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy steel base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people.  Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage. Some bowing to frame.
See our other listings for more of these units.

Pair of Matched Engineering V-Blocks

Skylarc Ref E125809

Pair of Matched Engineering V-Blocks.
Each unit is approx 359ix112x245mm.
Items show typical industrial wear and usage.

Steel Topped Wooden Workbench

Skylarc Ref S125251

Steel Topped Wooden Workbench.
Wood board bench frame and lower shelf.
Work surfaces and upper side walls are of 4mm welded steel plate.
Work surface approx 935mm above floor.
Sturdy unit.

AW Milling Collet Chuck Set

Skylarc Ref G125603

AW brand
BT40 mill chuck
6 x collets
C25-6, C25-8, C25-10, C25-12, C25-16, C25-20
In case

Engineering Vice (100x65mm)

Skylarc Ref Y126713

Engineering Vice (100x65mm).
Jaw Opens to: 65mm.
Jaw Length: 100mm.
Jaw Depth: 35mm.
Mounting point distance: 145mm to 185mm
Mounting point size: 20x15mm.

Rex Tristand CVX6 Chain Vice

Skylarc Ref L125868

Rex Tristand CVX6 Chain Vice.
Capacity 1/8" to 6".
Height above floor approx 830mm.
Legs fold for storage.
Condition - Shows typical industrial wear and usage. Some surface rusting. Dusty.

Mercer Bore Gauge

Skylarc Ref A125675

Model: Mercer 750/62
Analog bore gauge
Range of tips
Wooden case

10x Assorted Size Morse Taper Drill Shank Adapters

Skylarc Ref Y126245

10x Assorted Size Morse Taper Drill Shank Adapters.
Includes the following Morse sizes:
- 2x No. 5
- 5x No. 4
- 2x No. 3
- 1x No. 2

Adjustable Angle Mill Vice

Skylarc Ref L125764

Adjustable Angle Mill Vice.
Unknown manufacturer.
Jaw width 175mm.
Jaw opens approx 100mm.
Adjustable tilt angle.
Rotating base.
Mounting slots in base spaced approx 300mm apart.
Crank handle is included, see last photo.
Condition - threaded shaft to open/close Jaws tends to come detached, may need some servicing to reattach. Vice shows typical industrial usage and wear.

Adjustable Boring Bar

Skylarc Ref K125607

AW ACK 40-55T adjustable boring head
ACK4-40 tool extension
BT40 ACK4-80 tool holder

Heavy Duty Workshop Divider Wall

Skylarc Ref F125238

Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy steel base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people.  Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage.
See our other listings for more of these units.

Vintage Mini Metal Hobby Lathe

Skylarc Ref U126293

Vintage Mini Metal Hobby Lathe.
Unknown manufacturer and age.
Bed length is approx 215mm.
Swing approx 100mm.
Three jaw chuck approx 77mm outside diameter, inside diameter approx 15mm.
Jaws open up to approx 40mm.
Overall dimensions approx 420x160x160mm.
Condition - Jaws open and close good, Chuck shaft spins smoothly but is a bit stiff. Cutting Tool Assembly moves well over the bed. Drive motor and second belt Pully Assembly is missing. Chuck key missing.
See photos for further details on Lathe and its condition.

Vintage EMF Welder

Skylarc Ref S125953

Vintage EMF Welder.
Plate information:
"E.M.F Electric Co. (NZ) LTD
No 776 Z3
Type: TAD300
400/415 Volts 50Hz 1 Phase 37 Amps
72 Volts
Current Range 75 - 300
C97- 1942 - P.F.8
Max Cont. Rating 200"
3 phase 32A, 500V plug.

Sandvik Coromant T-Max Indexable Milling Cutter R245-20Q60-12M

Skylarc Ref T125564

Sandvik Coromant T-Max Indexable Milling Cutter.
Part No. R245-20Q60-12M.
Includes tool Holder part No. A267-801 1UNC.
Includea mounting bolts and hard case.
Condition - Shows some usage and wear, see photos. Some Indexes are missing.

Pack of Weldwell 4.0mm Low Hydrogen Welding Electrodes

Skylarc Ref U126215

Pack of Weldwell 4.0mm Low Hydrogen Welding Electrodes.
15kg net weight.
Made in NZ.
New unopened sealed box.

Pack of Weldwell 2.5mm Low Hydrogen Welding Electrodes

Skylarc Ref T126214

Pack of Weldwell 2.5mm Low Hydrogen Welding Electrodes.
Four 2.2kg packs are new and manufacturer sealed a fifth pack has been opened, see photos.

Makita Cut-off Saw 2414NB

Skylarc Ref Z125856

Makita Cut-off Saw.
Model No. 2414NB.
Uses 355mm diameter blades.
Tool shows moderate industrial usage and wear.

Assortment of BOC Welding Torch Equipment

Skylarc Ref Q126107

Assortment of BOC Welding Torch Equipment.
Various torches, attachments and guages.

Sandvik Coromant BT40 ER32 Collet Chuck

Skylarc Ref F124900

Sandvik Coromant BT40 ER32 Collet Chuck.
Sandvik Coromant 6408278, 1.9685 in Shank Connection.
C5-391.14-32 057 Coromant Capto® to ER collet chuck
Attached ½" 13-12 Collet.

Pair of Heavy Steel Saw Horses

Skylarc Ref I126203

Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 100x100mm hollow steel.
Each is approx 850mm tall.
Length each approx 1500mm.
Heavy steel support frames.
Approx 700mm wide at feet.
Condition - Items show heavy industrial wear and rusting but are still very solid units.

Sandvik Coromant Capto Fine Boring Head Adapter C5-R825C-AAF047A

Skylarc Ref T125590

Sandvik Coromant Capto Fine Boring Head Adapter type No. C5-R825C-AAF047A.
Includes original plastic case.

Pair of Heavy Steel Saw Horses

Skylarc Ref M126207

Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 125x125mm hollow steel.
Each is approx 850mm tall.
Length each approx 2200mm.
Heavy steel support frames.
Approx 550mm wide at feet.
Condition - Items show moderate industrial wear and some rusting but are still very solid units.

Moore and Wright Adjustable Micrometer

Skylarc Ref C125677

Moore and Wright 6"-12" micrometer
No.1044
Interchangeable rods
Test blocks
Wooden case

Partial Set of Micrometers and Testing Gauges

Skylarc Ref M125947

Partial Set of Micrometers and Testing Gauges.
5 x Outside Micrometers (Assorted Makes):
0.001" 5-6".
0.001" 4-5".
0.001" 3-4".
0.001" 1-2".
0.01mm 25-50mm.
3 x Testing Guages (Assorted Makes):
5" - 0.0000".
3" - 0.0000".
2".

Heavy Duty Steel Topped Workbench

Skylarc Ref R125094

Heavy Duty Steel Topped Workbench.
Work surface approx 940mm above floor and is comprised of a 2mm thick sheet steel surface.
Rear back wall rising approx 430mm above work surface and holding a 220mm wide shelf.
Includes Record No. 4 vice.
Lower sliding doors with inner storage.
Condition - Well used but sturdy unit.

Pair of Large Heavy Steel Workshop Saw Horses

Skylarc Ref Q125587

Pair of Large Heavy Steel Workshop Saw Horses.
100x100mm heavy steel beam support and horizontal member.
Each unit is approx 2100mm long, 870mm wide at base feet, and 1080mm tall.
Very heavy sturdy units for heavy duty work.
Some surface rusting from exterior storage.

Steel Workshop Pigeon Hole Parts Storage Shelf Unit

Skylarc Ref P125092

Steel Workshop Pigeon Hole Parts Storage Shelf Unit.
24x pigeon hole type shelves each approx 230x150mm.
Three upper full length shelves.
Condition - Unit is very dusty from workshop usage, would benefit from a clean. Some finish scratches and wear.

Set of 6 Arcolet 5/8 Hold Down Clamps

Skylarc Ref G125967

Set of 6 Arcolet 5/8 Hold Down Clamps.
Includes metal storage case.

Vintage Larcher BT50 Tool Holder Kit w/ Accessories

Skylarc Ref C125599

Vintage Larcher BT50 Tool Holder Kit.
Made in England by Larcher.
Includes:
- BT50 Type Tool Holder.
- 6x Collets,
- 3x Wrenches
- Steel storage box.
Condition - Vintage kit showing typical industrial wear and usage. Unknown if kit is complete, see photos.

BT40 SLA32-90 Tool Holder w/Rapid Insert Mill Drill

Skylarc Ref E124899

BT40 SLA32-90 Tool Holder w/Rapid Insert Mill Drill.
Drill Bit: 26WCMX 3XD 050308 26mm 3D inserted drill.

Sandvik Coromant Indexable Mill Cutter R390-050Q22-17M

Skylarc Ref V125592

Sandvik Coromant Indexable Mill Cutter.
Type No. R390-050Q22-17M.
Includes insert Hex bolt driver and original box.
Condition - Cutter shows very minor signs of brief usage, see photos.

Amano Electronic Time Clock PIX-21

Skylarc Ref T125850

Amano Electronic Time Clock.
Series PIX-10
Model No. PIX-21
Powers on and prints, see photo.

3x Anti Fatigue Rubber Workshop Floor Mats

Skylarc Ref Q126263

3x Anti Fatigue Rubber Workshop Floor Mats.
Each is approx 1520x915mm.
Condition - As new unused leftover Workshop supply stock still wrapped unopened from old supplier. Photos of unrolled mat are indicative only.

Large Antique Leg Vice

Skylarc Ref S126291

Large Antique Leg Vice.
Unknown manufacturer and age.
130mm jaw width.
Centre cylinder does turn and Jaws will open and close.
See photos for details on the design of the vice.
A great item for restoration.

Assorted Vintage Wood Turning Chisels

Skylarc Ref O126313

Assorted Vintage Wood Turning Chisels.
19x complete Chisels plus some extra loose components.
Manufacturers unknown.
Ages of items unknown though some appear to be older than others.
Lomgest Chisels are approx 440mm long, smallest approx 175mm.
See photos for further details on cutting tip types and condition of each tool.

Cigweld Transarc 400S Welder

Skylarc Ref M125271

Cigweld Transarc 400S Welder.
Grounding cable with clamp attached.
3-phase, 32A, 500V power plug.

Makita 150mm Bench Grinder GB601

Skylarc Ref N125844

Makita 150mm Bench Grinder.
Model No. GB601
Uses up to 150mm diameter grinding wheels.
Single phase
One transparent guard is missing.

3x 17-Ton Lifting Bow Shackles

Skylarc Ref Y125569

3x 17-Ton Lifting Bow Shackles.
All show typical industrial usage.

Heavy Steel Framed Workshop Storage Rack Shelf Unit

Skylarc Ref R125250

Heavy Steel Framed Workshop Storage Rack Shelf Unit.
MDF board shelves.
Heavy steel welded frame.
Plywood back boards added to backside.
Eye loops attached to top sides for lifting unit.
Total height including backboards is approx 2410mm.

Marlco Thread Measuring Parallels

Skylarc Ref S125667

4-7
8-12
23-18
20-28
32-44
In case

NT50 SMA22-150 (M24x3P) Face Mill Holder

Skylarc Ref Q125977

NT50 SMA22-150 (M24x3P) Face Mill Holder.
With attached TFMRY-652 22R 10 face mill.

Large Assortment of Workshop Consumables/Supplies

Skylarc Ref P126002

Large Assortment of Workshop Consumables/Supplies.
Including but not limited to expanding foam, Seals, rust protection, Grease, cleaner/polisher, zinc, oil, marking spray etc.
Please note that most if not all of these consumables are used/partial.

3M Speedglas Welding Helmet (Incomplete Set)

Skylarc Ref Z125960

3M Speedglas Welding Helmet (Incomplete Set).
Includes carrying bag (one side doesn't zip up), Welding mask, belt, charger and accessories.

Mitutoyo Telescoping Gage Set

Skylarc Ref E125653

6 x telescoping gauges
Code 155-904
Smallest 13mm
Largest 135mm
In case

Assorted Lot of Turning Tools

Skylarc Ref H125968

Assorted Lot of Turning Tools.
Lot of 7 (25x25mm) Turning Tools - Lengths ranging from: 160 - 300mm.
Lot of 4 (25x20mm) Turning Tools - Lengths ranging from: 135 - 210mm.
Lot of 6 (20x20mm) Turning Tools - Lengths ranging from: 110 - 175mm.
Please see photos for types of cutting head.

Pair of 4.8M Lashing Chains

Skylarc Ref H126124

Pair of 4.8M Lashing Chains.
3/8" Grab Hook on one end and O Ring on the other.

Assortment of Welding Equipment

Skylarc Ref X126166

Vintage Bench Mountable Guillotine.
Includes various types of welding torches, torch heads, vavle guages, welding rods, welding trolley and welding rod holder and welding shield.

Large Office Bookshelf Unit

Skylarc Ref W125255

Large Office Bookshelf Unit.
30mm thick MDF boards Laminated with Faux Wood and of-white surfaces.
12x adjustable shelves each approx 490x380mm.
Shelf support pins are included
Condition - Heavy, sturdy unit. Some surface marks, dirty fingerprints etc, would benefit from a surface clean. Lower front edging trim loose.
See our other listing for a matching shelf/cabinet unit.

Partial Set of Micrometers and Testing Gauges

Skylarc Ref L125946

Partial Set of Micrometers and Testing Gauges.
Includes:
Storage Case (Missing lid).
Assorted make outside Micrometers (5 units):
0.01mm 125-150mm.
0.01mm 75-100mm.
0.01mm 50-75mm.
0.01mm 25-50mm.
0.01mm 0-25mm.
Assorted make testing guages (5 units):
125mm.
75mm.
50mm x 3.

NEW Bosch GWS 1400 C Professional Angle Grinder

Skylarc Ref B125546

NEW Bosch GWS 1400 C Professional Angle Grinder.
Note unit is new out of the box but has been banded by SCE.
Rated power input 1,400 W.
No-load speed 11,000 rpm.
Power output 820 W.
Grinding spindle thread M 14.
Disc diameter 125 mm.
Rubber backing pad, diameter 125 mm.
Wire cup brush, diameter 70 mm.

CNC Lathe Turning Tool

Skylarc Ref U125617

C4-R166.4KF-22090-22

Antique Welder

Skylarc Ref Q125951

Specifications from plate:
"E.M.P. Electric Co. (N.Z.) LTD.
No: C725.
Type: TAD300.
Primary: 400/415 Volts, 37 Amps
50 Hz
1 Phase
75 - 300"
32A 500V 3 Phase Plug.

Larcher Morse Type Drill Chuck w/ Accessories & Case

Skylarc Ref N126312

Larcher Morse Type Drill Chuck w/ Accessories & Case.
Made in England.
No. 3 Morse Type shank.
Includes assorted sizes of compatible Collets, collet Wrench, and steel case.

BT40-SLA25-075 Side Lock Tool Holder

Skylarc Ref C124897

BT40-SLA25-075 Side Lock Tool Holder.
Attached unknown size milling bit included.

Heavy Duty Workshop Table Shelf Unit

Skylarc Ref V125098

Heavy Duty Workshop Table Shelf Unit.
Heavy Duty steel frame with painted MDF board top and lower surfaces.
Shows typical workshop wear and surface grime.

Smiths Engineering Tachometer

Skylarc Ref R125666

Model: Smiths A.T.H.10
In case
With accessories

Mitutoyo Micrometer

Skylarc Ref Y125673

Mitutoyo 0 - 4" micrometer
Interchangeable stems
2 test blocks
Wooden case

Sandvik Coromant 880-D2200L25-03

Skylarc Ref X125932

Sandvik Coromant 880-D2200L25-03 Insert Drill.
880-0403 - P Insert
880-0403 - C Insert
5514 020 - 58 Screw

Pair of T-Slot Kits (1 Partial)

Skylarc Ref G125681

Pair of T-Slot Kits (1 Partial).
1 x Mitee-Bite 16mm Metric T Slot Kit.
1 x Unknown Make 20mm Metric T Slot Kit (zonly Bolts and Screws - NO T Slots.
Please see photos for more details.

2x Industrial Roller Conveyor Sections

Skylarc Ref Y126219

2x Industrial Roller Conveyor Sections.
One unit is 2440mm long, 400mm wide.
Second unit is 1750mm long, 400mm wide.
Both have one folding adjustable support leg on one end.
Both use 300mm long, 60mm diameter metal Rollers.
Condition - Both units appear to have been previously used with a larger machine as each only has one support frame. Both units are missing some Rollers. See photos for further details.

10 Partial Packs of Assorted Milling Inserts

Skylarc Ref M126155

10 Partial Packs of Assorted Milling Inserts.
Please see photos for an idea of quantities, shapes/sizes and specifications.
Please note inserts may not be matching with the packages they are in.

Steel Topped Workbench w/ Storage

Skylarc Ref P125248

Steel Topped Workbench.
5mm thick steel work surface approx 920mm above floor.
Lower storage shrlves on left side. Inner shelves are approx 260mm wide.
Upper 845mm long 490mm high steel plate holing an angled plywood tray with holes for holding tooling etc.
Workbench painted in black.
Heavy, sturdy unit.

2400x1200mm Office White Board

Skylarc Ref L125556

2400x1200mm Office White Board.
Office Max branded.
Thin black lines added to surface, see photos.
Magnetic backing.

Makita 750W Corded 2-Dpeed Hammer Drill

Skylarc Ref Y125855

Makita 750W Corded 2-Dpeed Hammer Drill
Model No HP2010N.
750W
13mm keyed chuck (chuck key is included).
Includes a few assorted loose jobber Drill Bits and plastic case.

Heavy Duty Workshop Divider Wall

Skylarc Ref A125233

Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy sterl base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people.  Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage. Wall is bent, see photo.
See our other listings for more of these units.

Large Assortment of Cut-Off/Grinder Wheels/Discs

Skylarc Ref V126008

Large Assortment of Cut-Off/Grinder Wheels/Discs.
40 x Taipan 15×6.5×22.23mm grinding discs.
6 x FlexOvit 125×6.8×22.23mm grinding discs.
8 x Taipan 115×1.2×22.23mm cutting discs.
2 x Taipan 125×1.2×22.23mm cutting discs.
2 x Taipan 170×7.0×22.23mm grinding discs.
1 x Haiken 125×6×22.23mm grinding wheels.
13 x FlexOvit 115×1.6×22.2mm cutting wheel.

Adjustable Tilt Milling Attachment Platform

Skylarc Ref J126256

Adjustable Tilt Milling Attachment Platform.
15mm thick top and bottom sterl plates.
Adjustable Angle top plate.
See photos for further design details of this unit.

Workbench Steel Plate Surface w/ Shelf Bracket, 2400x865x6mm

Skylarc Ref W125281

Workbench Steel Plate work Surface sheet.
Steel plate is 2400x865x6mm.
Includes sturdy welded steel frame on left side that can hold a shelf 680x300mm and is approx 280mm high.
Great for adding a heavy Duty Steel work surface to your existing Workbench or fir using to create an all new Workbench.

Makita 6906 ¾" Impact Wrench

Skylarc Ref J125996

Makita 6906 ¾" Impact Wrench

Assortment of Indexable Milling Cutters

Skylarc Ref Q125327

4 assorted T-Slot Cutters
Sizes ranging from: 220x30mm to 160x25mm.

BT40-SLA25-075 Side Lock Tool Holder

Skylarc Ref W125905

BT40-SLA25-075 Side Lock Tool Holder.
25.0mm Dia x 65mm 75mm Long.
Attached Insert Drill Max Unknown Size.

Pair of Powerbuilt 20 Ton Hydraulic Bottle Jacks

Skylarc Ref K125997

Pair of Powerbuilt 20 Ton Hydraulic Bottle Jacks.
1 x Powerbuilt 20 Ton Short Hydraulic Bottle Jack:
Lifting range:210mm to 350mm.
1 x Powerbuikt 20 Ton Hydraulic Bottle Jaxk:
Lifting range: 230mm to 385mm.

20+ Assorted Straight Tooth Milling Cutters

Skylarc Ref R125770

20+ Assorted Straight Tooth Milling Cutters.
Assorted brands and sizes.
Diameters ranges from approx 70mm up to approx 125mm.
Condition varies with each unit. Most show moderate Workshop surface grime from storage. Some have surface rust spotting.

Wall Mountable 12M Single Phase Retractable Extension Reel

Skylarc Ref V126112

Wall Mountable 12M Single Phase Retractable Extension Reel.
Recoila Branded.

Heavy Duty Workshop Divider Wall

Skylarc Ref D125236

Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy steel base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people.  Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage.
See our other listings for more of these units.

Antique Lorch & Schmidt Watchmakers Screwhead Polishing Machine

Skylarc Ref I126307

Antique Lorch & Schmidt Watchmakers Screwhead Polishing Machine.
Includes wood case.
Set is missing components.
See photos for further details on Included components and condition.

Elephant 0.8T Lever Chain Hoist

Skylarc Ref G125889

Elephant 0.8T Lever Chain Hoist.
Model YA-80
Chain - VH-5.6
Manufactured in Japan in 2018.

7 x Taper Adapters

Skylarc Ref N125610

3 x MT.5-4
2 x MT.4-3
MT.4-2
MT.3-2

Benchtop Welding Rod Dryer Warmer

Skylarc Ref W125853

Benchtop Welding Rod Dryer Warmer.
Unknown manufacturer.
Interior dimensions are approx 510x175x40mm.
Item warns up when plugged in.
Unit shows moderate industrial usage and wear.

8 Partial Packs of Assorted Sandvik Coromant Milling Inserts

Skylarc Ref G126019

8 Partial Packs of Assorted Sandvik Coromant Milling Inserts.
Please see photos for an idea of quantities, shapes/sizes and specifications.
Please note inserts may not be matching with the packages they are in.

3 Jaw Lathe Chuck

Skylarc Ref D125964

3 Jaw Lathe Chuck.
Outside Diameter:
Inside Diameter:
Missing Chuck Key.
Made in China.

Mitutoyo Depth Micrometer Set

Skylarc Ref Z125674

Mitutoyo 21794
10 x interchangeable stems
Longest 230mm
Grub screw in side of unit is bent but still tightens
Case

Large Assortment of Wall Mountable Plastic Containers

Skylarc Ref M125697

Large Assortment of Wall Mountable Plastic Containers.
68 Plastic Containers:
10 x Yellow 340x210x140mm
18 x Yellow 230x160x120mm
18 x Blue 230x125x120mm
22 assorted Sizes/Colors.
9 Wall Mounting Brackets:
4 x 605x450mm.
2 x 940x455mm.
3 x 1200x600mm.

Gorilla Silverback Aluminum A-Frame Extension Ladder

Skylarc Ref C125989

Gorilla Silverback Aluminum A-Frame Extension Ladder.
2.7 - 4.5M Extension.
Rated at 150KG.

Large Assortment of Workshop Handtools/Supplies

Skylarc Ref Z126168

Large Assortment of Vintage/Antique Hand Tools.
Including but not limited to:
Drill bits, files, sanding paper, grinding/sanding wheels, welding wire wheels, and much more.
See photos for idea on sizes, quantities, condition.

Partial Set of Micrometers

Skylarc Ref N125948

Partial Set of Micrometers.
4 Micrometers:
1 x No.103-182A.
1 x No.103-181A.
1 x Mitutoyo 75-100mm 0.01.
1 x Mitutoyo 50-75mm 0.01.
Includes wooden carrying case

10 Partial Packs of Assorted Milling Inserts

Skylarc Ref N126156

10 Partial Packs of Assorted Milling Inserts
Please see photos for an idea of quantities, shapes/sizes and specifications.
Please note inserts may not be matching with the packages they are in.

Two Steel V Blocks

Skylarc Ref F125966

Two Steel V Blocks.
Please see individual dimensions in photos.

NT50 Type Mill Tool Holder w/ Pinzbohr Attachment

Skylarc Ref I125735

NT50 Type Mill Tool Holder w/ Pinzbohr Attachment.
Unable to see a ID marking on tool Holder.
Attachment is a Pinzbohr 42 4403 type.
See photos for further holder/Attachment type details.

BT40-SLA32-90 Side Lock Tool Holder

Skylarc Ref C125937

BT40-SLA32-90 Side Lock Tool Holder
Attached Insert Drill of unknown size.

Moore and Wright Micrometer

Skylarc Ref V125670

Moore and Wright 2"-6"
With interchangeable tips
3 test blocks
Case

Heavy Duty Workshop Specialised Rack Trolley Cart

Skylarc Ref N125246

Heavy Duty Workshop Specialised Rack Trolley Cart.
Heavy steel frame with 125mm diameter Castors.
20mm thick wood ply board surface with vertical slats for holding materials. Tapered slat spacing is approx 55mm at base and approx 100mmat top. An 1850x975mm plywood platform has been added to top of vertical slats, see photos. This can be easily unbolted and removed by buyer if desired.
Condition - Unit shows normal Workshop usage marks.

Titan 1.5T Chain Hoist

Skylarc Ref N125896

Titan 1.5T Chain Hoist.
3m chain length.
7mm chain diameter.

Assorted Lot of Fastening Hardware, Screws, Nuts, Nails & More

Skylarc Ref T126812

Assorted Lot of Fastening Hardware, Screws, Nuts, Nails & More.
Assorted leftover home Workshop supply stock of Assorted Fastening Hardware. Some hardware appears vintage.
Long bolts, small screws and nails, Washers, box of Assorted staples.
Includes a red steel parts drawer unit 395x160x135mm.
Condition varies with each item. Most appear to be older but unused stock. Others are newer stock.

Mobile Heavy Duty Steel Welding Wire Mounting Bench

Skylarc Ref W125957

Mobile Heavy Duty Steel Welding Wire Mounting Bench.
Cylindrical mount approximatr inner diameter: 39mm.
Includes assorted Wire feed wheels and components (see photos).
Sitting on 4x 110mm castor wheels.

Pair of Lashing Chains

Skylarc Ref F126122

Pair of Lashing Chains.
1 x 6M.
1 x 4.2M.

26x Assorted Slotting Mill Cutters

Skylarc Ref V125774

26x Assorted Slotting Mill Cutters.
Assorted sizes and brands.
Diameters range from approx 60mm up to approx 153mm.
Condition varies with each unit. Most show moderate surface grime, some rusting from workshop storage. Some show varying levels of usage.

Pair of Groz No 391 Sash Cramps

Skylarc Ref O126105

Pair of Groz No 391 Sash Cramps.
Cramp range up to: 1500mm.

3x Assorted Heavy Steel Saw Horses

Skylarc Ref Q126211

3x Assorted Heavy Steel Saw Horses.
Custom built units.
Top beams are 100x100mm hollow steel on two units and one unit has hollow 130x80mm steel top beam.
Heights are 835mm, 850mm and 890mm.
Lengths are 2100mm, 2160mm, and 2410mm.
Heavy steel support frames.
Widths at feet are 550mm, 660mm, and 1040mm.
Condition - Items show heavy industrial wear and rusting but are still very solid units.

BT40-APU13-110 Drill Chuck

Skylarc Ref D125912

BT40-APU13-110 Drill Chuck.
Unknown size attached drill bit (approx 10mm diameter).

Heavy Duty Workshop Divider Wall

Skylarc Ref C125235

Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy sterl base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people.  Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage. Some slight bending to vertical frame.
See our other listings for more of these units.

Pair of 2.5M 3000KG Capacity Lifting Slings

Skylarc Ref X126114

Pair of 2.5M 3000KG Capacity Lifting Slings.
Titan Branded- Flat webbing Slings.
Near new condition. Still partially in packaging.

Pair of Matched Engineering V-Blocks

Skylarc Ref A125805

Pair of Matched Engineering V-Blocks.
Each unit is approx 270x113x187mm.
Items show typical industrial wear and usage.

Large Assortment of Vintage/Antique Hand Tools

Skylarc Ref Y126167

Large Assortment of Vintage/Antique Hand Tools.
Various conditions.
Including but not limited to:
Screw drivers, wrenches, staplers, saws, handles and many more. Please see photos for idea of condition and quantity.

2x Bow Shackles, 17-Ton Capacity

Skylarc Ref D125886

2x Bow Shackles, 17-Ton Capacity.
Gap at bolt 60mm
Inner bow gap approx 95mm.

2x Assorted Country Flags

Skylarc Ref B126274

2x Assorted Country Flags.
Flagmakers branded items.
All appear to be 1.8m by 0.9m size (not all verified).
Materials are either Polynit or Polybunting
Includes the following country flags:
- Sweden (2x flags)
- Finland
- Denmark
- Italy
- Spain
- UK
- Germany
- Brazil
- Canada
- United States
- China
- Taiwan
- Philippines
- United Arab Emirates
- Japan
- New Zealand (3x flags)
- Australia (2x flags)
Condition - Most flags appear unused or used very little. Some of the NZ and Australia flags show some yellowing from display usage.

Bosch Professional Laser Mesaure GLM 500

Skylarc Ref Q126315

Bosch Professional Laser Mesaure.
Model No. GLM 500
Includes instruction manual and original box.
Uses 2x AAA batteries (not included)
Condition - laser unut shows mild usage. Original box shows more moderate wear.

BT40 EM25X45 Tool Holder with attached Insert Drill

Skylarc Ref B125910

BT40 EM25X45 Tool Holder with attached Insert Drill.
Unknown size insert drill (approximate diameter 20mm) attached.

8x 20L Portable Diesel Cans

Skylarc Ref R125848

8x 20L Portable Diesel Cans.
Military style design.
20L capacity each.
All are used but empty.

Assorted LED Worksite Work Lights & Stands

Skylarc Ref M125869

Assorted LED Worksite Work Lights & Stands.
Includes:
- 2x Jobmate 40W LED worklights, one unit includes tripod stand, second unit missing its stand.
- 1x Stanley 30W LED floor worklight.
- 1x Stanley 10W LED floor worklight.
- 2x worklight tripods, both are not compatible with the LED lights in this auction.
Condition - All show moderate industrial Worksite wear and usage. Some bolts missing.

Heavy Duty Workshop Specialised Rack Trolley Cart

Skylarc Ref G125083

Heavy Duty Workshop Specialised Rack Trolley Cart.
Heavy steel frame with 125mm diameter Castors.
20mm thick wood ply board surface with vertical slats for holding materials. Tapered slat spacing is approx 55mm at base and approx 100mmat top.
Condition - One large break in wood slats, see photos, otherwise normal Workshop usage marks elsware.

CNC Lathe Parting Tool

Skylarc Ref I125631

Iscar EZA-125, C4-MAHD parting tool holder
Iscar CGPAD-4R-T22 parting tool and insert

Iscar BT50 Type Tool Holder w/ Mill Cutter Attachment

Skylarc Ref G125733

Iscar BT50 Type Tool Holder w/ Mill Cutter Attachment.
Both units are Iscar branded.
Tool Holder part No. DN2080 50 SEM 40x40.
Mill Cutter Part No. D125-08-40-R07

3 x Sandvik Coromant R216 Carbide End Mills

Skylarc Ref B126014

3 x Sandvik Coromant R216 Carbide End Mills.
R216.33-01030-AC3OP 1630

9 Assorted Length Air Hoses

Skylarc Ref A126143

9 Assorted Length Air Hoses.
1 x 60M Ariana 20 BAR 13mm.
1 x 40M Ariana 20 Bar 13mm.
1 x 15M 200 PSI 10mm.
1 x Panaflex 20M 15Kg/cm².
1 x 15M Unknown Brand/Rating Air Hose.
1 x 10M Unkniwn Brand/Rating Air Hose.
1 x 30M Ariana 20 Bar 13mm.
1 x 25M Ariana 20 Bar 10mm.
1 x 4M Unkniwn Brand/Rating Air Hose.

Sandvik Coromant Capto Extension Adapter C6-391.01-63 140A

Skylarc Ref S125589

Sandvik Coromant Capto Extension Adapter type No. C6-391.01-63 140A.
Includes original case.

Assortment of 61 Cutting/Grinding Wheels/Discs

Skylarc Ref Y126011

Assortment of 61 Cutting/Grinding Wheels/Discs.
33 x Taipan 180×1.6×22.23mm Cutting Discs.
14 x FlexOvit 115×6.0×22.23mm Grinding Wheels.
3 x FlexOvit 125×6.8×22.23mm Grinding Wheels.
5 x Dronco 230×1.9×22.23mm Cutting Discs.
3 x EuroMarc Elite 180×7.0×22.23 Grinding Wheels.
3 x Tailin 180×6×22mm Grinding Wheels.

Assorted Lot Vintage Fastening Hardware, Parts, Components, & More

Skylarc Ref U126813

Assorted Lot Vintage Fastening Hardware, Parts, Components, & More.
Vintage and some antique collections of Assorted spare parts, springs, door locks, Lever knobs, brass hardware, nuts, bolts, etc. A wide variety of items, good for possible usage in spare parts and components for vintage and antique items.
See photos for further details on what is included.
Condition varies greatly with each item.

Engineering Mill Angle Plate, 413x227x268mm

Skylarc Ref D125808

Engineering Mill Angle Plate.
Item is approx 413x227x268mm

Assortment of Hand Tools

Skylarc Ref S126707

Assortment of Hand Tools.
Large Shovel, 3 Varrying size sledge hammers, 2 varrying size levels and a surveying tool with case.

Workshop Workbench

Skylarc Ref B125260

Workshop Workbench.
Work surface approx 930mm above floor and is comprised of mostly wood boards. A 400x320mm section of plate steel is built into left front corner for mounting a vice.
Lower wood board shelf.
Two lower front wooden drawers, one drawer has damaged front, see photos.
Upper rear 460mm high steel sheet backboard with a 1000x190mm wood shelf.
See photos for further design details.

Industrial Lifting Platform Trolley

Skylarc Ref B125286

Industrial Lifting Platform Trolley.
Unknown manufacturer and model.
Lifting weight capacity unknown.
Lifting platform approx 795x535mm.
Lifting platform lifts from approx 120mm to approx 1620mm.
Mounted on steel wheels.
Condition - Jack handle is broken off, see photo. Hydraulics operate normally. Shows typical industrial wear and usage.

CNC Lathe Tooling Holder

Skylarc Ref T125642

24 plastic tool holders
Mounted on steel backplate
28mm holders

Industrial Welding Rod Dryer

Skylarc Ref Y125283

Industrial Welding Rod Dryer.
Unknown manufacturer.
Single phase.
Condition - Unit will power on and heat up. Shows typical industrial wear and use. Some denting to panels.

Assortment of Lifting Slings (various lengths)

Skylarc Ref W126113

Assortment of Lifting Slings (various lengths).
10 individual slings, lengths ranging from: 1.8M to 5.6M. Unknown rated capacities.

2x Lathe Tool Posts

Skylarc Ref V126242

2x Lathe Tool Posts.
Each is approx 125mm long, 47mm wide, 70mm high (excluding top bolts).
Inner groove approx 37mm wide, 23mm deep.
See photos for further details on design of units.

Vintage Workshop/Trades A-Frame Scafolding Platform

Skylarc Ref D125990

Vintage Workshop/Trades A-Frame Scafolding Platform.
Pair of Collapsible A-Frame Uprights, Dimensions: 1130x820x1740mm.
Set platform Heights: 500,1070, 1350 and1630mm.
3 x Wooden platforms, Dimensions: 2950x240x45mm.

10 Partial Packs of Assorted Sandvik Coramant Milling Inserts

Skylarc Ref P126158

10 Partial Packs of Assorted Sandvik Coramant Milling Inserts.
Please see photos for an idea of quantities, shapes/sizes and specifications.
Please note inserts may not be matching with the packages they are in.

Heavy Duty Steel Worksite Workshop Tool Storage Locker

Skylarc Ref U125825

Heavy Duty Steel Worksite Workshop Tool Storage Locker.
Appears to be custom built.
Upper 230mm deep storage area with steel divided compartments.
Lower storage area with removable front Steel sheet cover.
Unit can be locked with padlocks. One small padlock with key included. Two other attache padlocks have no keys.
Raised base for Forklift or pallet jack moving.
Unit show typical undustrial usage and wear.

3x 12-Ton Lifting Bow Shackles

Skylarc Ref W125567

3x 12-Ton Lifting Bow Shackles.
Items show typical wear and use.

Heavy Duty Workshop Divider Wall

Skylarc Ref G125239

Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy steel base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people.  Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage. One support leg is slightly out of alignment
See our other listings for more of these units.

Antique Brass Glaziers Diamonds by Radcliffe

Skylarc Ref E126303

Antique Brass Glaziers Diamonds.
Made in England by Radcliffe.
Age unknown.
Unsure what measurement scale is used on tool as it doesn't seem to be either metric or Imperial. Scale marked on tool reads to 18, in metric it measures out to be 205mm.
Includes wood case.
See photos for further design and condition details.

Workshop Vice on Heavy Steel Stand

Skylarc Ref S125095

Workshop Vice on Heavy Steel Stand.
Unknown vice manufacturer.
125mm wide jaws.
Mounted on a 920mm tall heavy Steel stand.
Shows typical workshop wear and usage.

CNC Lathe Turning Tool

Skylarc Ref A125623

Unbranded lathe turning tool
16mm diameter shaft

7 Used Green ArcSafe Welding Screens (1800x1800mm)

Skylarc Ref Y126115

7 Used Green ArcSafe Welding Screens (1800x1800mm).
Condition varies, items show typically industrial Workshop ware/usage.

Assortment of 5 Micrometers

Skylarc Ref O125949

Assortment of 5 Micrometers.
1 x 0.01mm 125-150mm.
1 x 0.01mm 100-125mm.
1 x 0.01mm 125-150mm.
1 x 0.01mm 100-125mm.
1 x 0.001" 2-3"

Heavy Duty Adjustable Low Platform Trolley

Skylarc Ref T125070

Heavy Duty Adjustable Low Platform Trolley.
Platform approx 870x400mm.
Height adjustable from approx 180mm to 220mm.
Solid steel wheels.
Heavy unit.
1100mm long handle.

Micrometer Checking Gage Block Set

Skylarc Ref W125645

Metric micrometer check set
In wooden case

Depth Micrometer

Skylarc Ref A125649

Moore Wright and Sheffield
Imperial micrometer
5 rods
Longest 200mm

Assortment of Wooden Moulds and Casting

Skylarc Ref S126733

Assortment of Wooden Moulds and Casting.
11 wooden moulds, 1 steel casting (top left is casting of top right)

NT50 FMB32-20 M24 Face Mill Arbor

Skylarc Ref G125941

NT50 FMB32-20 M24 Face Mill Arbor.
Face Mill: D100-07-32 R07.
Unknown Size Inserts.

Industrial Hand Guillotine on Heavy Steel Stand

Skylarc Ref O125221

Industrial Hand Guillotine on Heavy Steel Stand.
Unknown manufacturer.
"1/6" max" hand written on unit.
Blade length approx 160mm.
Mounted onto a heavy steel Saw Horse like 835mm tall stand.

NT50 ER32-85 Collet Chuck Tool Holder

Skylarc Ref T125694

NT50 ER32-85 Collet Chuck Tool Holder.
Collet type attached: ER32 20-19 25/32".

Insize Digital Calipers (0-200mm)

Skylarc Ref G125993

Insize Digital Calipers (0-200mm).
Note case is slightly damaged - see photos.

Pair of Heavy Steel Saw Horses

Skylarc Ref L126206

Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 100x100mm hollow steel.
Each is approx 845mm tall.
Length each approx 2210mm.
Heavy steel support frames.
Approx 720mm wide at feet.
Condition - Items show moderate industrial wear and some rusting but are still very solid units.

Assortment of Welding Equipment

Skylarc Ref O126001

Assortment of Welding Equipment.
Various Gas Welding Tips, New Armadillo Visor, New BOC Welding mask, pair of BOC Welding goggles near new, various Welding torches, handles and Valves.
Please see photos for specifications.

Heavy Duty Industrial Pallet Racking Unit

Skylarc Ref Q125093

Heavy Duty Industrial Pallet Racking Unit.
Includes the following components:
- 2x blue vertical frames each approx 915mm wide, 2445mm tall.
- 4x orange 2740mm long horizontal beams each 110x50mm.
- 2x 2740mm long custom made horizontal beams.
- 3x MDF Shelving boards.
Condition - Custom beams show moderate surface rusting. Some rust spotting on the other nanufactured components. Dusty.
Ravking is dissasembled and on a pallet for pickup.

NT50 Type Mill Tool Holder

Skylarc Ref U125747

NT50 Type Mill Tool Holder.
Unable to locate a visible ID marking indicating brand and model.
Some surface rust spotting from storage

NT50 APU13-120 Chuck Tool Holder

Skylarc Ref Y125699

NT50 APU13-120 Chuck Tool Holder.
With attached drill bit: approx L60mm, D10mm.

Large Assortment of Dispenser Guns

Skylarc Ref S126109

Large Assortment of Dispenser Guns.
15 assorted Dispenser guns.

3x Assorted Single & Double Pulley Snatch Blocks

Skylarc Ref F126226

3x Assorted Single & Double Pulley Snatch Blocks.
Includes:
- 3" single Pulley block, 0.5 ton capacity.
- Titan branded single snatch block, 75mm, 500kg capacity.
- unlabeled double Pulley block, approx 100mm diameter pulleys.

½" Professional Torque Wrench

Skylarc Ref P125950

½" Professional Torque Wrench.
Calibrated 17/12/20 till 18/12/21.
Includes plastic holding case.
565mm length.

Set of Sutton Reamer Pilots

Skylarc Ref H125656

8 reamer pilots
One missing from set
Wooden case

Pair of Record 136 Sash Cramps

Skylarc Ref N126130

Pair of Record 136 Sash Cramps.
1200mm max cramp.

BT40 ODP 12x106 G2.5 Flexfit Tool Holder

Skylarc Ref K125919

BT40 ODP 12x106 G2.5 Flexfit Tool Holder.
Please see photos for full designation.

3-Phase Industrial Metal Cut-off Saw

Skylarc Ref C125287

3-Phase Industrial Metal Cut-off Saw.
Blueflash branded, model number unknown.
Can fit blades up to 300mm diameter.
3-phase, 32A, 500V plug attached.
Mounted on a mobile trolley frame.
Condition - Unit shows moderate industrial wear and usage. Two wheels on trolley do not roll properly and need replacing.

Assorted Lathe Tooling, Boring Bars, Mounts, Accessories

Skylarc Ref I126255

Assorted Lathe Tooling, Boring Bars, Mounts, Accessories.
Boring Bars and associated mkubts/clamps are 25mm diameter size.
See photos for further details on the variety of included items.

T190 - BT40-APU13-110 Drill Chuck BT APU Type

Skylarc Ref D124898

T190 - BT40-APU13-110 Drill Chuck BT APU Type.
Attached unknown size drill bit included (approx 10mm).

BT40-ER32-150 Balanced Collet Chuck

Skylarc Ref I125917

BT40-ER32-150 Balanced Collet Chuck
22,000 RPM.
150mm Long.
7/16" 12-11 ER32 Collet Attached.

15-Piece Wood Router Corner Edging Cutting Bit Set w/ Case

Skylarc Ref L126310

15-Piece Wood Router Corner Edging Cutting Bit Set w/ Case.
Unknown manufacturer.
Shank diameter of bits 6mm.
Includes wood case.
Condition - Some bits are unused with wax coating still on them, others show some usage. See photos for further Condition details.

Heavy Duty Workshop Divider Wall

Skylarc Ref Z125232