Ab Industries Surplus Plant and Machinery Auction

Berco Line Boring Machine

Skylarc Ref T124264

Model: Berco BC-5 Line Boring Machine for Main and Crankshaft Bearings
Max cylinder block length 2600mm
Bed to boring bar
Max: 820mm
Min: 510mm
12 spindle speeds
75, 85, 115, 130, 180, 210, 280, 325, 430, 500, 680, 800 rpm
Automatic spindle work feed
.75 kw motor
Central support rest
Three sets supports
80mm, 200mm, 300mm
6 x boring bars
2870mm x 60mm
1800mm x 40mm
1900mm x 50mm
1980mm x 31.6mm
1980mm x 31.6mm
1520mm x 31.6mm
Manuals
Adapter collets
Trolley
Micrometers

To see this machine running:
https://www.youtube.com/watch?v=mciwzPAC6LA

Caterpillar V8 Diesel Engine

Skylarc Ref O123635

Model: Caterpillar 3408 V8 Diesel Engine
Serial number 67U2571
365 horsepower
Turbo
This engine is a running unit has been dyno tested and all performance parameters were met.

Caterpillar D398 Diesel

Skylarc Ref B123622

Model: Caterpillar D398 12 Cylinder Diesel
Serial number: 66B08241
Performance spec: F2M7
Arrangement: 3N1127
850 horsepower (625kw) at 1200rpm
On skids
Twin turbo
Imported from the USA as a running engine

To see a video of this engine being turned over:
https://youtu.be/yIM9xrCTMic

Holke Milling Machine

Skylarc Ref N124258

Model: Holke F-11-V vertical mill
1200mm x 300mm table
3 tee slots
Vertical spindle speeds 48rpm - 4080rpm
NT40 vertical spindle taper
Horizontal spindle speeds 48rpm-1500rpm
NT40 horizontal spindle
Power feeds on all axis (Z disconnected)
Traverse (xyz): 815mm x 400mm x 420mm
Feed rates 12 - 128mm/minute
Sony LH10 digital read out
Horizontal spindle mount but no arbor
One additional head mounting rings
Three phase

To see this machine running:
https://youtu.be/Y_spGNFvA1U

Ceccato Workshop Compressor

Skylarc Ref B123908

Model: Ceccato Aria CSA20 500D
Max pressure 8 bar
Rotary screw compressor
500 litre air receiver
Three phase
34676 hours on clock
Next service due 35546 hours
Built in air cooler/dryer

Large Industrial Parts Wash

Skylarc Ref X124294

Large Industrial parts washer
Three phase
Fold down door
Cleaner liquid tank underneath
Internal dimensions
1450mm wide x 1450mm deep x 1250mm tall
1210mm diameter parts tray
Runs on rails for easy external access
Two rotary cleaning arms
Rarely available in this size

Stanko Three Phase Lathe

Skylarc Ref K124229

Model: Stanko 16K20
Overall bed length 1700mm
Distance between centers approx 1100mm
Swing over bed 200mm (400mm diameter)
52mm spindle bore
24 spindle speeds
10rpm - 1600rpm
Metric and imperial thread cutting
Elbo VF2/N digital read out
320mm diameter four jaw chuck
250mm diameter three jaw chuck
460mm diameter faceplate
Coolant pump
Manufactured 1976
3953 hours on clock
Tidy solid machine

To see this machine running:
https://youtu.be/7bSizursCFU

Sunnen Honing Machine and Accessories

Skylarc Ref V123824

Model: Sunnen 650D
Single phase
1/4hp electric motor
Foot controller
Custom stand
Huge range of hones and accessories
Large box of stones
Motor gets hot when running, needs attention

To see a video of this machine running:
https://youtu.be/-emNPoIvGQo

A.M.C. Crankshaft Grinder

Skylarc Ref I123837

Model: Aarhus Motor Compagni K.3000
Max capacity grinding length 3170mm
Max swing 730mm
EAM Stop Cut Gauge & flying micrometre for measuring while grinding
Mitutoyo KA-12 Digital Read Out
spare wheel hubs
6 x grinding wheels
Grinding wheel balancer
335mm bed lifting height spacers
2 x new oversize 1400mm Noritake grinding wheels
Oversize guard for large wheels
Modernised with T-verter K1 26 amp variable speed drive to optimise grinding speed
Manuals
New Zealand's largest capacity crankshaft grinder

To see this machine running
https://youtu.be/XjZeQVD0L6Y

Portable Counterbore Cutting Machine

Skylarc Ref H124252

Model: Mira BB/M-20
Single phase
In case
Manual
Accessories

Caterpillar 3306 Diesel Engine Parts

Skylarc Ref M123737

Reconditioned engine block
Used engine block
Three cylinder heads in unknown condition (stored for use)
2 bell housings
2 cranks both standard unground
Box of parts including injector pump

Colchester Student Lathe

Skylarc Ref W124241

Model: Colchester Student 6"
Overall bed length 980mm
Distance between centers approx 550mm
Swing over bed 160mm (320mm diameter)
Swing over gap 240mm (480mm diameter)
38mm spindle bore
8 spindle speeds
54rpm - 1200rpm
Metric and imperial thread cutting
Taper cutter
Quick change tool post
5 tool holders
200mm TOS three jaw chuck
180mm three jaw chuck
250mm four jaw chuck
300mm faceplate
Assorted chuck jaw
100mm recoverable gap
Steady
Live centre
Some tooling
Three phase

To see this machine running:
https://youtu.be/PDnBm-XVBK8

Harrison 13 Inch Lathe

Skylarc Ref Q124261

Model: Harrison M300 13" Lathe
Bed length 1440mm
Distance between centers 1000mm
Swing over bed 330mm
Swing over gap 480mm
Spindle bore 38mm
210mm long gap
2.2kw main motor
12 spindle speeds
40rpm - 2500rpm
Metric and imperial thread cutting
Taper cutter
Foot brake
Quick change tool post
Centre
160mm diameter three jaw chuck
200mm diameter four jaw chuck
300mm diameter face plate
Steady off another machine
Manuals

To see a video of this machine running:
https://youtu.be/0X2DZWnUGmI

Marine Caterpillar V8 Diesel

Skylarc Ref J123630

Model: Caterpillar 3408 V8 Diesel Engine
Marine version
Serial number 67U2571
365 horsepower
Turbo

Falcon Surface Grinder

Skylarc Ref Z123828

Model: Falcon (Chevalier) FSG-3A20
Three phase
Hydraulic surface grinder
Working surface 200mm x 460mm
Table travel longitudinal 536mm Crossfeed 235mm
Max spindle centre to table 365mm
Powerfeeds both axis 1.5hp spindle motor
Hydraulic pump
200mm grinding wheel
Magnetic table
Manual

To see this machine running:
https://youtu.be/jOjiaWA748c

Cummins 6 Cylinder Diesel Engine in Frame

Skylarc Ref H123628

Model: Cummins 6CTA8.3 C260
194 Kw
Manufactured 2010
Engine number 87818771
On stand with radiator
Air cleaner
Ex pump unit
Running engine straight out of work
Replaced as they were using oil

Cummins 6 Cylinder Diesel Engine in Frame

Skylarc Ref G123627

Model: Cummins 6CTA8.3 C260
194 Kw
Manufactured 2010
On stand with radiator
Air cleaner
Ex pump unit
Running engine straight out of work
Replaced as they were using oil

Large Flat Surface Grinder

Skylarc Ref H123862

Model: MAS BRV-30 Flat Surface Grinder
Three phase
1000mm x 300mm magnetic chuck
310mm diameter segment type grinding head
2000mm long grinding bay
1450 rpm grinding head
Runs well but coolant pump untested

To see a video of this machine running:
https://youtu.be/UvKMsYl1YJY

Caterpillar 3406 Diesel Engine Parts

Skylarc Ref H123758

2 used engine blocks
Used standard camshaft
Reconditioned camshaft
Engine pan
Intake manifold
New damper part 167-8130
Bell housing and flywheel
Injector pump
4 pallets of assorted parts

Caterpillar 3408 Block, Camshafts and Crankshaft

Skylarc Ref G123757

Reconditioned crankshaft
Ground .25mm
Used block (crack tested)
Reconditioned camshaft
Used camshaft

V8 Stand for Vertical Boring

Skylarc Ref U123615

V8 cylinder boring stand
For vertical cylinder boring machines
Includes stands
Angle braces
Adapter collets
Ex Ruaro Cylinder Boring Machine

Reconditioned Cummins ISX Head and Camshafts

Skylarc Ref A123751

Reconditioned cylinder head
Reconditioned intake and exhaust camshafts

30 Ton Hydraulic Press

Skylarc Ref V124266

Concord Tooling Hydraulic Press
Dual power sources
Enerpac PER-1621 single phase hydraulic power pack
Enerpac P-30 manual hydraulic power pack
Fixed height table
150mm maximum ram extension
75mm diameter ram
730mm x 275mm x 40mm thick plate
On heavy duty wheels

To see this machine running:
https://youtu.be/oSiJhgkpu90

Eutectic Castolin Metal Treatment Gun

Skylarc Ref Q123663

Model: Eutectic Castolin CastoDyn DS 8000
industrial thermal coating gun
Extension neck
Nozzles
Trolley
Manuals
Oxyacetylene regulators
Hoses
Range of metal spray powders

Pallet of Caterpillar Parts

Skylarc Ref X123774

Gears
Air filter tops
Bearing shells
Precleaner
Huge mixed selection of new parts

Pallet of Cummins Diesel Spares

Skylarc Ref Y123775

New piston liner kits
Exhaust manifold 855
Bearings
Gaskets
New camshafts
New ring sets
Vibration dampers
Oil cooler element
Push rods
And much more

Reconditioned 3406PC Cylinder Head

Skylarc Ref N123738

Reconditioned Caterpillar 3406 Pre Combustion Cylinder Head

Double Container Shelter

Skylarc Ref B123934

2 20 foot shipping containers
One in good condition
A small amount of surface rust showing on inside of roof
Second container is very rusty with holes in the roof and floor
Timber and corrugated metal roof between the two
Contents not included
Buyer will need to disassemble

600hp Containerised Engine Dyno

Skylarc Ref K123631

Model: Heenan & Froude Standard D.P.Y.5
600hp max capacity
Max rpm 3500
Mounted into 2 20' containers
Insulated container has the dyno with sump
Exhaust pipes / hoses
Second container is a standard 20 foot
Both containers in rough condition and have had a roof constructed over them
Has large diesel tank 2100mm long x 1200mm diameter
Assume shelving
Water tank behind and three cooling towers
Lean too with electrical, pumps and boxes of exhaust fittings
Buyer will need to decommission for removal

Cummins 6 Cylinder Diesel Engine

Skylarc Ref I123629

Model: Cummins NT-855-L4 6 Cylinder Diesel
236 horsepower
Configuration number D092199LX01
Engine number 10707207
Manufactured 1976
This engine is a running unit has been dyno tested and all performance parameters were met.

Cummins 855 Parts

Skylarc Ref V123746

Reconditioned crankshaft
Reconditioned camshaft
3 x Reconditioned Cummins 855 heads
2 Cummins NH220 heads

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New

Skylarc Ref K123605

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Includes box and gasket set.
Bag opened to aquire better photos of unit.
New unused unit.

Mack E9 Diesel Engine Crankshaft

Skylarc Ref O123739

Reconditioned Mack E9 Diesel Crankshaft
Ground .25mm

Conrod Gap Grinder

Skylarc Ref O124259

Model: Robbi Con-Rod Gap Grinder
Three phase 32 amp plug
180mm diameter grinding wheel
On wooden stand
Made in Italy

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines

Skylarc Ref M123607

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Bag opened to aquire better photos of unit.
New unused unit. Box and gasket set missing.

Large Drawer Unit of Taps and Dies

Skylarc Ref U124213

78 drawer unit
Sliding blocks of drawers that can be reconfigured
Huge selection of taps and dies
183 taps
86 dies

Kent-Moore Injector Tube Reconditioning Set

Skylarc Ref F124250

Model: Kent-Moore J-3380 Injector Tube Reconditioning Set
DDA Series 60
In case

Fronius TIG/MIG Welder

Skylarc Ref U123875

Model:: Fronius Trans Pulse Synergic TPS330
Three phase
Fronius FK71 cooling unit
Fronius VR152 wire feeder
330 amp max welding output
Mig gun
TIG torch
Arc electrodes
On wheels

2 Hydraulic Truck Leveling Legs

Skylarc Ref I123941

Hiab type leveling legs
850mm long
250mm diameter pads

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New

Skylarc Ref J123604

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Includes box and gasket set.
Bag opend to aquire better photos of unit.
New unused unit.

Pair of Hydraulic Truck Leveling Legs

Skylarc Ref J123942

Hiab type leveling legs
850mm long
250mm diameter feet

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New

Skylarc Ref I123603

OEM Turbocharger Assembly 167-9271 for CAT Caterpillar C15 Engines
Item is as new with box and gasket set. Bag has been opened to aquire better photos of item.

Large Radiator and Fan

Skylarc Ref A123907

Large radiator for industrial diesel engine
1760mm diameter fan with shroud
Caterpillar 3512

Heavy Duty Steel Workshop Workbench

Skylarc Ref P124364

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 855mm above floor.
Rear back board for hanging tools etc rises 650mm.over work surface.
Note - all other Items seen on and around Workbench are not included.

Steel Workbench with Vice

Skylarc Ref M123555

3mm steel top with rolled front edge
860mm worktop height
150mm back guard
Angle steel frame
Shelf underneath
Irwin Record No.5 130mm vice

Caterpillar 398 Diesel Engine Parts

Skylarc Ref Q123741

Reconditioned Standard Crankshaft
Box of counterweights and bolts
12 used conrods
6 used cylinder heads
4 intercoolers
Intercooler housing
Filter housing
TDI air starter

Large Steel Workbench with Vice

Skylarc Ref Z124296

Very large workbench
3mm steel top with rolled front edge
Angle steel frame
Heavy duty timber shelf the full length
Record 36P 150mm metal vice

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines

Skylarc Ref L123606

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Bag opened to aquire better photos of unit.
New unused unit. Box and gasket set missing.

Pair of Hydraulic Truck Leveling Legs

Skylarc Ref H123940

Hiab type leveling legs
850mm long
230mm diameter foot pads

Pallet of Starter Motors and Alternators

Skylarc Ref E123989

Large number of diesel engine starter motors off a wide range of engines
Approx 40 total
5 alternators
Unknown makes and models
Unknown operational condition

Cummins B Series LPG Engine

Skylarc Ref V123616

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Heavy Duty Steel Topped Workbench

Skylarc Ref C123883

Heavy Duty Steel Topped Workbench.
Heavy steel frame with 5mm thick steel plate top surface.
MDF board lower shelf.
Includes attached vice.
Total Workbench length including vice is approx 2770mm.

Cummins B Series LPG Engine

Skylarc Ref A123595

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Cummins B Series LPG Engine

Skylarc Ref Y123619

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Heavy Duty Steel Workshop Workbench

Skylarc Ref N124362

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 855mm above floor.
Rear back board for hanging tools etc rises 650mm.over work surface.
Includes attached Record No. 5 bench vice.
Cloth side curtains for consealing items on lower shelf.
Note - With exception of the vice, all other Items seen on and around Workbench are not included. Oiling pump seen attached to backboard is not included.

Single Phase Drill Press

Skylarc Ref G123939

Model: Hafco Metalmaster SBD-20B
16 speeds
Single phase 1 hp motor
Belt drive
Morse taper mounted chuck
Mounted on metal stand

Caterpillar 3304 Head and Injector Pump

Skylarc Ref F123756

Caterpillar 3304 injector pump
Reconditioned bare head

Lathe Mounted Grinder in Case

Skylarc Ref W124215

Three phase lathe mounted grinder
0.55kw motor
Belt drive
Range of grinding wheels and adapters
15 amp three phase plug

Vertex Milling Machine Rotary Table

Skylarc Ref M124231

Model: Vertex 210mm
Fitted with three jaw chuck
Chuck key

Pallet of New Cummins Cylinder Kits

Skylarc Ref W123773

Approx 40 total
Wide range of engines
See photos for part numbers

Huge Lot of Puller Parts

Skylarc Ref Y124269

Large selection of puller parts
410mm diameter 40mm thick plate
6 leg bases
Numerous extension rods
9 various sets of arms
Longest 530mm
Smallest 100mm
Parts from a wide range of sets

Three Phase Petrol Generators

Skylarc Ref L123554

Kohler 16hp petrol engine
Model K341S
Brush 10kva 3 phase A.C. generator
Unknown condition
Partially disassembled

Pair of Gantry Crane Rails

Skylarc Ref R123924

2 Large crane beams
210mm x 130mm x 12700mm
Great for a farm bridge or similar

Long Steel Workbench with Vice

Skylarc Ref G124251

3mm sheet steel top
Angle steel shelf underneath
Record No.6 vice

Holset Turbocharger Assembly 3803119 for Caterpillar KTA19 Engines

Skylarc Ref R123898

Holset Turbocharger Assembly 3803119 for Caterpillar KTA19 type Engines.
ID plate is also stamped with the following numbers:
- 18053875
- HC5A
Assembly is new never installed leftover parts supply stock.

Large Sandblasting Pot

Skylarc Ref K123839

Heavy steel sandblasting pot
Pot approx 800mm tall x 400mm diameter

Detroit Diesel Injector Tube Kit

Skylarc Ref Z124244

Detroit Diesel 149 injector tube kit
In box with instructions
Foam has collapsed

Cummins Injector Tube Kit

Skylarc Ref D124248

Cummins Injector Tube Replacing and Cutting Kit
Assorted cutters, flaring tools and pilots
In case

Pair of Large Intake Housings

Skylarc Ref E123937

Overall dimensions 800mm tall x 390mm diameter
Outlet diameter 150mm

Cummins B Series LPG Engine

Skylarc Ref X123618

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

CAT Caterpillar Engine Injector Timing Kit

Skylarc Ref N123842

CAT Caterpillar Engine Injector Timing Kit.
Kit number unknown.
See photos for details on Included components.
Includes Steel case.

Cummins B Series Engine Parts

Skylarc Ref K123761

Reconditioned Cummins 4B cylinder head
6B flywheel and bell housing
6B Conrods and pistons
6B Marine exhaust manifold
6B used cylinder head
6B standard crank

Cummins Torque Plate

Skylarc Ref K124281

Torque plate for Cummins B-series engines

Power Wash Steam Cleaner

Skylarc Ref A123933

Model: Power Wash Gold
Intergroup WS202 high pressure pump
Three phase
Diesel powered heater

Heavy Duty Steel Workbench w/ Vice

Skylarc Ref I123655

Heavy Duty Steel Workbench w/ Vice.
Steel frame with 3mm thick steel plate top work surface.
Work surface 850mm above floor
150mm high rear Backsplash.
Lower wooden shelves.
Includes attached Record No.5 vice.
Note - Auction is for above items only, all other items seen on and within and near Workbench are not included.

Large Steel Workbench with Vice

Skylarc Ref R124262

3mm steel top
Angle steel frame
Wooden shelf
850mm worktop height
Record No.6 vice (150mm)

Steel Workbench with Vice

Skylarc Ref J124228

Sheet steel top 3mm thick
Rounded front edge
840mm worktop height
760mm back board
Set of wooden drawers
Angle steel frame
Cupboard and drawers in front
125mm metal vice

Dyco Drill Press

Skylarc Ref H124200

Dyco drill press
Single phase
Bench mount but has been placed on pedestal
13mm chuck
Belt drive
260mm x 270mm bed

Caterpillar 3208 Cylinder Heads

Skylarc Ref E123755

6 reconditioned cylinder heads

2x Commercial Tyres w/ Wheels, 16.5" Rims

Skylarc Ref K123683

2x Commercial Tyres w/ Wheels, 16.5" Rims.
Tyres are Skid Power HD, Wide Wall, 12-16.5 NHS.
Condition - Tyres show some wear and weathering from outside storage and usage wear but still have approx 23mm of tread remaining so might still be of use. Age of tyres is unknown. Rims show some surface rusting. See photos for further Condition details.

Large Industrial Power Cabinet

Skylarc Ref Y123905

Large industrial switch board
Bremca brand
Breakers
Switches
Bus bars
Meters

Volvo D7E Diesel Engine Parts

Skylarc Ref R123742

Reconditioned engine block
2 used standard crankshafts
Boxes of new valves
17 x new cylinder liner kits
5 new head gaskets
Used cylinder head
Assorted gaskets
Rocker shaft
Box of new bearings, main bearings, bushes
Assorted injectors
New waterpump

Turbocharger HX50 for Cummings M11 Diesel Engines

Skylarc Ref D123988

Turbocharger HX50 for Cummings M11 Diesel Engines.
Manufacturer is unknown.
Model No. HX50.
Unit appears to have been previously opened as there are oily fingerprints on it but it does not appear to have been installed or used. Leftover engine repair shop parts supply stock.
See our other listings for more of these HX50 turbochargers.

Caterpillar 3412 Diesel Engine Parts

Skylarc Ref K123735

Cylinder head (unknown condition)
Box of parts
Oil pan

Oil Pump 341312 for CAT Caterpillar C15 Diesel Engine

Skylarc Ref I123707

Oil Pump for CAT Caterpillar C15 Diesel Engine.
Part No. 341312.
Msde in USA.
Includes box.
Condition - Pump appear to be leftover unused repair shop parts stock. One hole shows rust spotting from long term storage. Interior of pump is clean so is likely just unused old stock.

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref C123987

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref A123985

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Caterpillar 3408 Intercoolers

Skylarc Ref Z123776

Two intercoolers
One appears new

4 x Bays Pallet Racking

Skylarc Ref R123560

Capital style pallet racking
34 x 2780mm long crossbeams
5 x 4000mm tall x 900mm wide uprights
Tombstone style fittings
Feet and lower legs very rusty
Buyer to disassemble

Large Steel Bin of Hydraulic Components

Skylarc Ref Z124400

Stacking steel bin
Contents of hydraulic components
Valve banks
Hydraulic motor
Sleeps
Solenoid control valves
Filters
And more

Workshop Dividing Walls

Skylarc Ref U123719

Approx 25 metres of aluminum and glass panel walls
2400mm tall
1330mm long each full panel
25 Panels total
Includes lights and plugs but does not include fans
Glass broken on many panels
Buyer to disassemble and remove

Parts Only Electric Lifter

Skylarc Ref L123918

Model: Crown 20MT130A
Max lift height 3300mm
1000kg capacity
Integrated charger
1060mm long forks

Double Sided Steel Workbench

Skylarc Ref V124240

Back to back workbenches with backboard between
3mm steel tops
Rolled front edge
Angle steel frame
Lights
Shelving
860mm worktop height
Shelf underneath
Contents of threaded rod

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref B123986

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref W123981

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Cummins B Series LPG Engine

Skylarc Ref Z123620

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

20 Foot Container Shed

Skylarc Ref U123927

20 foot shipping container
Roller door installed one end
Window installed in door on other end
Lights inside
Other contents not included
Significant rust, particularly in roof
Has steel roof laid over top but this is also rusty

Hobart TIG Welder

Skylarc Ref V123876

Model: Hobart TR-250-HF
250 amp welding power source
TIG and Arc
Setup for TIG with torch
Rental bottle not included
Regulator
Manual
Foot controller
Is currently hard wired, will be disconnected for collection

Volvo VCADS Pro Engine Diagnostic Interface Kit 999 8555

Skylarc Ref D124378

Volvo VCADS Pro Engine Diagnostic Interface Kit 999 8555.
Includes diagnostic unit, data link cables, PC cable, hard case.
Note - PC software Disk is missing.

Compressor Pressure Tank

Skylarc Ref C123909

Atlas Copco branded pressure tank
Approx 600mm diameter x 1440mm tall
With metre
On vertical stand

Large L-Shaped Corner Steel Workbench

Skylarc Ref Y123853

Large L-Shaped Corner Steel Workbench.
Item is two workbenches that have been Welded together to form a very large corner Workbench..
3mm thick steel sheet top work surfaces.
Work surface approx 905mm above floor.
Lower plywood shelves.
650mm high backboard wall surrounding the majority of the Workbench.
Includes attached vice.
Includes attached Flourecent lights.
Attached small 600x355x240mm cubby for manuals etc.
Note - all other items seen on or nearby Workbench are not included.

Caterpillar Generator

Skylarc Ref P123636

Diesel generator power end
Model: Caterpillar 3406
261kva (209kw)
Three phase 400 volts
50 hertz

Komatsu 12V-170 Heads and Conrods

Skylarc Ref P123740

12 x used cylinder heads
12 x reconditioned conrods

Low Heavy Duty Workshop Mobile Shelf Trolley

Skylarc Ref L124360

Low Heavy Duty Workshop Mobile Shelf Trolley.
Sterl bar frame with 3mm thick steel plate top and lower surfaces.
Mounted on heavy Duty 100mm diameter Castors.
Shows typical industrial Workshop usage and wear.

Torque Wrench Testing Machine by Britool

Skylarc Ref W124319

Torque Wrench Testing Machine by Britool.
Made in England.
Serial No. 8M/153.
Capacities:
- 0-5000 lb/ins.
- 0-400 lbs/ft
- 0-55 kg/m
Some rust spotting on unit.

Heavy Duty Steel Workbench

Skylarc Ref F123704

Heavy Duty Steel Workbench.
Steel frame with 3mm thick steel plate top work surface.
Work surface 850mm above floor
150mm high rear Backsplash.
Lower wooden shelves.
Cloth curtains covering lower shelf.
Note - other items seen on and near Workbench are not included.

Pallet of Assorted Used Industrial Electrical Equipment

Skylarc Ref A123959

Pallet of Assorted Used Industrial Electrical Equipment.
Assorted Used circuit breakers, control panels, Workshop siren horns, and other various electrical components, see photos.
Merlin Gerin Masterpact M30 N1 circuit breaker
All items are used.

Heavy Duty Steel Workshop Workbench

Skylarc Ref Z124374

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 850mm above floor.
150mm high rear Backsplash
Note - all other Items seen on and around Workbench are not included.

Steel Workbench with Vice

Skylarc Ref H123836

3mm steel top with rolled front edge
Angle steel frame
Wooden shelf
125mm vice

200 Litre Drum Castrol Coolant

Skylarc Ref I124279

Castrol Premium Cool Plus 50
New 205 litre drum
For specs:
https://www.castrol.com/en_nz/new-zealand/home/products/truck-and-bus/coolants.html#tab_premium-plus

Large Office Storage Wall Cabinet Cupboard Bench w/ Shelving

Skylarc Ref S124315

Large Storage Wall Cabinet
MDF construction.
Lower cabinet has top surface 930mm above floor, is 600mm deep, ten doors six compartments each with adjustable shelf.
One door has a lock, key is missing.
Upper Shelving Unit 1200mn in height and 320mm deep.
Items on unit are NOT Included.
Buyer should bring extra hands to assist with removal as unit is very long and heavy at 4500mm in length and access door to offices is narrow. Tools with square head drivers should be brought for buyer to potentially disassemble for removal.

Large Office L-Shaped Desk Workstation w/ Chair & 3x Drawer Units

Skylarc Ref E124301

Large Office L-Shaped Desk w/ Chair & 3x Drawer Units.
- large 2410x2110mm corner desk with height adjustable platform
- 3x Mobile Drawer units each 495x425x655mm. One unit is Lockable, key is missing.
- gas lift desk chair with black vinyl.
Condition - Some wear to seat vinyl. Otherwise just general office wear and usage marks.
Note - Auction includes above items only, all other items seen on and around desk in are NOT Included.
Buyer may need to disassemble desk on pickup as it is too large to move out available doors.

2.8m Double Leg Container Lifting Chain Assembly, 14,000kg Capacity

Skylarc Ref A123673

2.8m Double Leg Container Lifting Chain Assembly, 14,000kg Capacity.
Double keg capacity 14,000kg.
Single leg capacity 10,000kg.
2.8m chain length.
16mm chain size.
Master link approx 310x200mm.
Container connectors attached to chain ends.

Valve Guide Installation Kit

Skylarc Ref C123831

Kline valve guide Installation kit
5/16"
In case

Heavy Duty Steel Workshop Workbench

Skylarc Ref O124363

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 850mm above floor.
Rear Backsplash 150mm high.
Cloth side curtains for consealing items on lower shelf.
Note - all other Items seen on and around Workbench are not included.

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref Z123984

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

SKF Electronic Stethoscope 729160 Kit

Skylarc Ref C124325

SKF Electronic Stethoscope kit.
Model No. 729160.
Made in Sweden.
Includes Stethoscope, 2x probes, headphones, case, instruction manual.
Condition - Case exterior shows moderate wear from industrial engineering Workshop storage. Items inside show generally mild usage.

Industrial Digital Scales

Skylarc Ref K124255

Model MM MI101 digital display
800mm x 800mm treadplate steel platform
Power adapter

Hydraulic Cylinder

Skylarc Ref W124267

Unknown make, model or specifications
100mm diameter
160mm long

Large 3/4" Drive Torque Wrench, 1150mm length

Skylarc Ref U124369

Large 3/4" Drive Torque Wrench, 1150mm length.
ID label is worn off so manufacturer, model and torque specs are unknown.
1150mm in length.
3/4" Drive head.
Slight bend to handle.

Cast Lapping Plate

Skylarc Ref I123863

Cast Lapping Plate
285mm x 285mm
In case

Long Steel Workbench

Skylarc Ref H124278

3mm sheet steel top
Angle steel frame
Shelving

Steel Workbench

Skylarc Ref B124298

3mm steel top with rolled front edge
Angle steel frame
Worktop height 850mm
Heavy duty timber shelf
760mm tall back board

Small Lapping Plate

Skylarc Ref J123864

Small cast lapping plate
175mm x 130mm
In wooden case

200 Litre Drum Mobil Oil

Skylarc Ref E124275

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

Turbocharger Assembly for Cummings Diesel Engine K19, as new

Skylarc Ref P123896

Turbocharger Assembly for Cummins Diesel Engine K19 HC5A.
OEM No. 3803119.
Serial No. 13072505.
Condition - Leftover unused never installed parts supply stock. Some light rust spotting on mounting surface from storage.

Bering Puller Race Extractor Set by Pickavant

Skylarc Ref O124337

Bering Puller Race Extractor Set by Pickavant.
Set No. LKV-52.
Made in England.
Capacity 28mm to 127mm.
See photos for included components.

Pallet of Three Phase Electrical Equipment

Skylarc Ref U123641

Microdrive MK II Variable Speed Drive
Three phase sockets
Large circuit breakers
Three phase switches

Steel Surfaced Workshop Workbench

Skylarc Ref U123693

Steel Surfaced Workshop Workbench.
Work surface approx 855mm above floor.
150mm high Backsplash.
3mm thick steel top work surface with MDF board lower shelf.
Break in a weld by one of the rear legs, see photos. Some surface rust.

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref U123979

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

20 Foot Insulated Container

Skylarc Ref B123726

20 Foot Insulated Container
Rear panel replaced with steel sheet
Doors replaced with box steel swing door, needs straightening and covering
Aluminum grate floor
Ex generator container
Some rust

Set of 4x Powerbuilt 3-Ton Jack Stands

Skylarc Ref G124329

Set of 4x Powerbuilt 3-Ton Jack Stands.
Manufactured 12/2015.
Adjustable height from approx 280mm up to approx 420mm.

Hand Linisher

Skylarc Ref Z123880

Linisher powered by angle grinder
Grinder has power cable cut off
Arm unscrewed from power unit
Some belts
Needs repairs

Hitachi 500kg Motorised Chain Hoist

Skylarc Ref P123948

Hitachi 500kg Motorised Chain Hoist.
Type No. 1/2SNH.
6m Lifting Chain length.
3-phase.
Manufactured in 1986.
No pendant included.
Operational condition is unknown.

Plate Steel Welding Bench with Vice

Skylarc Ref O124285

12mm plate steel top
Box steel legs
150mm vice

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref V123980

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

19x Assorted Diesel Engine Service Repair Manuals

Skylarc Ref Q123975

19x Assorted Diesel Engine Service Repair Manuals.
Includes manuals for Alloa Chalmers, Caterpillar, Hyster, Perkins, Nissan, Rolls Royce, International, Hino and other brands of diesel engines. See photos for further details on spivific manuals included.
Condition - Items show moderate wear from engine shop usage.
See our other listings for more diesel engine service manuals.

11x Detroit Diesel Engine Service Repair Manuals

Skylarc Ref R123976

11x Detroit Diesel Engine Service Repair Manuals.
Includes the following Detroit diesel manuals:
- Series 53 Sections 1-3
- Series 53 Sections 4-15
- Series 60 Sections 1-2
- Series 60 Sections 3-15
- Series 71 Sections 1-3
- Series 71 Sections 4-15
- Series V71 Sections 1-3
- Series V71 Sections 4-15
- Series 92 Sections 1-2.23
- Series 92 Sections 2.24-6
- Series 92 Sections 7-15
Condition - Items show moderate wear from engine shop usage.
See our other listings for more diesel engine service manuals.

Hearing Test Quiet Room

Skylarc Ref X123904

Hearing test quiet room
90mm thick insulated walls and door
Single double glazed window
Lights inside aluminum exterior
Industrial Acoustics Company Limited
https://www.iac-noisecontrol.com/Standard-Models-Booths-IAC-Acoustics-Noise-Control-UK.html

Large Office Storage Wall Cabinet Cupboard Bench

Skylarc Ref H124304

Large Office Storage Wall Cabinet Cupboard Bench.
Laminated MDF construction.
8x doors covering four inner compartments each with a single adjustable shelf.
Items seen on and within unit are NOT Included.
Note - Buyer should bring extra hands to assist with removal as unit is very long and heavy and access door to offices is narrow.

Heavy Duty Steel Workshop Workbench / Shelving Unit

Skylarc Ref Q124365

Heavy Duty Steel Workshop Workbench / Shelving Unit.
Great multi purpose unit that can be used either as a workbench or as heavy duty storage shelving, or a combination of the two.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelves.
Note - all other Items seen on and around unit are not included.

200 Litre Drum Mobil Oil

Skylarc Ref D124274

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

Turbocharger HX50 for Cummings M11 Diesel Engines, New

Skylarc Ref X123982

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

205L (40gal) Drum Forklift Mounted Lifter

Skylarc Ref S123613

205L (40gal) Drum Forklift Mounted Lifter.
Unknown manufacturer.
Fork slots 190x90mm

Low Heavy Duty Workshop Platform Trolley

Skylarc Ref Z123672

Low Heavy Duty Workshop Platform Trolley.
10mm Diameter wheels
3mm thick steel plate surface.

Diesel Engine Compression Tester Kit

Skylarc Ref K124333

Diesel Engine Compression Tester Kit.
Unable to read label on case so manufacturer unknown.
Pressure Gauge reads to 1000psi (70 bar).
Includes assorted diesel adapters and plastic case. See photos for further details on items included. Kit does not appear to include all original accessories.

200 Litre Drum Mobil Oil

Skylarc Ref C124273

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

Box of Centrifugal Oil Filters and Accessories

Skylarc Ref P123584

Spin-Clean Model 150 Oil Cleaning Centrifuge
Filtek FT060 Oil Cleaning Centrifuge
ABB battery unit
ABB Shunts
Assorted bits and pieces

Ingersoll-Rand Compressor

Skylarc Ref J124176

Model: Ingersoll-Rand Type 30
Model 242 compressor
Three phase
Runs well

To see this machine running:
https://youtu.be/MSKPbPz5Zts

Caterpillar 3204 Engine Parts

Skylarc Ref D123754

Radiator
2 x exhaust manifolds
Injector pump

Mitutoyo Dial Indicator Set 950-158

Skylarc Ref E123677

Mitutoyo Dial Indicator Set.
Part No. 950-158
0.02mm to 2.6mm.
Dial unit Part No 1158.
Set appears to have all original components, see photos.
Includes case.
Set shows Workshop usage
Case exterior shows more moderate wear.

Valve Guide Installation Kit

Skylarc Ref D123832

Kline valve guide Installation kit
8mm
In case

Cummins K19 Diesel Engine

Skylarc Ref A123621

Model: Cummins QSK19-C 6 Cylinder Diesel Engine
19 litre
Engine serial: 37178233
Unknown specification
Engine for rebuild only
Unknown faults

Snap-on Computerized Tach Advance Timing Light MT2261A

Skylarc Ref U124343

Snap-on Computerized Tach Advance Timing Light.
Model No. MT2261A.
Includes user manual and plastic case.
Condition - Case hinges are broken. Tool shows typical shop usage.

Low Heavy Duty Workshop Mobile Shelf Trolley

Skylarc Ref M124361

Low Heavy Duty Workshop Mobile Shelf Trolley.
Steel bar frame with MDF board top surface.
Mounted on heavy Duty 145mm diameter Castors.
Shows typical industrial Workshop usage and wear.

Imperial Outside Micrometer Set, 0" to 6" Range

Skylarc Ref R123820

Imperial Outside Micrometer Set, 0" to 6" Range.
Unknown manufacturer.
Made in China.
Includes the following ranges:
- 0 to 1 inch
- 1 to 2 inch
- 2 to 3 inch
- 3 to 4 inch
- 4 to 5 inch
- 5 to 6 inch
Includes wood case.
Condition - Wood case is missing its lid. All test blocks are missing. Some rust spotting on Micrometer shafts.

Aluminum Cable Tray

Skylarc Ref O124181

Aluminium conduit / cable tray:
10 lengths x 6m
1 length x 2.6m
1 length x 2m
1 length x 1.8m
1 length x 1.75m

Heavy Duty Mobile Workshop Storage Shelf Trolley

Skylarc Ref P123844

Heavy Duty Mobile Workshop Storage Shelf Trolley.
50x50mm square steel bar frame.
18mm thick plywood shelves.
160mm diameter heavy duty castor wheels.
Solid heavy Duty unit.

Electric Concrete Mixer

Skylarc Ref S123561

Model: Spomasz-Blatystok BS125 Drum Mixer
Manufactured 1994
600mm drum diameter
On wheels
Single phase

To see this machine running:
https://youtu.be/2X-ulAnSzTc

Waterblaster Gun and Hose

Skylarc Ref S123587

Ehale ML955 5800psi waterblaster wand
Length of hose with connectors

Part 200 Litre Drum Bel-ray Oil

Skylarc Ref G124277

Bel-ray Raylene Ultra SAE 15W-50
Approx 2/3rds full 208 litre drum

Large Steel Workbench

Skylarc Ref O123557

3mm steel top with rolled front edge
860mm worktop height
150mm back guard
Angle steel frame
Shelf underneath

Industrial Heavy Duty Pallet Racking Components

Skylarc Ref U123667

Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 3x 3500mm high, 840mm wide vertical frames.
- 14x 2700x85x50mm horizontal beams.
- 12+ adjustable horizontal beam cross members.
Note - Auction includes the above mentioned items only.

Ican Drums, Lids and Paint Pails

Skylarc Ref O123661

5 x Ican 5 litre drums
Part 001014
5x Ican 10 litre drums
Part 001021
8 x Ican Pump Storage Lids
Part 001045
2 x Ican 2 litre drums
Part 001007
4 x Ican Pour Lids
Part 001373
2 x has Handy Paint Pail pro series

4 x Industrial Roller Doors

Skylarc Ref K123917

Four roller doors
Three with motors
No rails
Heights unknown
Widths:
3180mm
3180mm
2500mm
3750mm

Pallet of Perkins Diesel Engine Parts

Skylarc Ref U123771

FG Wilson Generator Engine Parts
Bearing shells
Gaskets
Lister spares
Box of new Perkins D4.203 parts

2 x V Blocks

Skylarc Ref L124230

Each 125mm long x 70mm wide x 90mm tall

33x Assorted Diesel Engine Service Repair Manuals

Skylarc Ref S123977

33x Assorted Diesel Engine Service Repair Manuals
Includes manuals for Lister, Toyota, Mitsubishi, Cummins, Volvo, Leyland, Isuzu, Iveco, Hino, Fiat, Komatsu, Deutz, KHD, Scania. See photos for further details on specific manuals included.
Condition - Items show moderate wear from engine shop usage.
See our other listings for more diesel engine service manuals

Snap-on Engine Cooling System Tester Kit SVTS262

Skylarc Ref L124334

Snap-on Engine Cooling System Tester Kit.
Kit No. SVTS262.
Includes original accessories and plastic case.
Includes two boxes with five additional adapters.

Low Heavy Duty Workshop Mobile Shelf Trolley

Skylarc Ref L123892

Low Heavy Duty Workshop Mobile Shelf Trolley.
Steel bar frame with 3mm thick steel plate top and lower surfaces.
Mounted on heavy Duty 95mm diameter Castors.
Shows typical industrial Workshop usage and wear.
Items seen on trolley are not included.

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley

Skylarc Ref T123848

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley.
Heavy duty steel frame.
Adjustable shelves supported by removable 22mm diameter steel rods, see photos.
Plywood shelf inserts.
100mm diameter heavy duty castor wheels.
Solid heavy duty versitile unit.

10x Assorted Lengths of Steel

Skylarc Ref Q123689

10x Assorted Lengths of Steel.
Assorted sizes and types.
Longest and largest unit is approx 6730x310x170mm. Remaining nine other steel lengths are of varying smaller sizes.
Condition varies with each unit. Most show heavy rusting, rust flaking, etc.

Assorted 1" Drive Sockets & Extensions, Metric & Imperial Sizes

Skylarc Ref T124368

Assorted 1" Drive Sockets & Extensions, Metric & Imperial Sizes.
Most items are unbranded with a few branded items mixed in.
Chrome Vanadium Steel.
Includes the following socket sizes:
- 3 1/4" (Kokon branded)
- 77mm
- 75mm
- 71mm
- 70mm
- 67mm
- 65mm
- 63mm
- 58mm
- 50mm
- 46mm
- 41mm
- 38mm
- 36mm (Gift branded)
- 200mm long extension
- 400mm long extension.
Steel case (missing its lid)

Low Heavy Duty Workshop Mobile Shelf Trolley

Skylarc Ref G123887

Low Heavy Duty Workshop Mobile Shelf Trolley.
Steel bar frame with 3mm thick steel plate top and lower surfaces.
Mounted on heavy Duty 100mm diameter Castors.
Shows typical industrial Workshop usage and wear.
Items seen on trolley are not included.

Generator Control Box

Skylarc Ref N123556

Petrol/Diesel generator control box
Variety of gauges
Emergency stop switch
Hour clock

Pneumatic Trolley Jack

Skylarc Ref P124260

Air operated trolley jack
Unknown make
Unknown capacity

Generator Testing Load Bank

Skylarc Ref K123865

Model: Taylors Electric Hot Water Boiler Load Bank
60 kw capacity
10,5,2 and 1kw incriminating switches
On wheels

Nico Marine Gearbox

Skylarc Ref E123599

Model: Nico Marine MGNV7040-1
Rated hp 387
Engine speed 2300rpm
Unknown condition

Large Stainless Steel Tank

Skylarc Ref T123666

Large Stainless Steel Tank.
Scrap steel seen inside unit is not included.
Surfaces show wear and weathering from long tern outside exposure.

Caterpillar C9 Diesel Engine Parts

Skylarc Ref I123759

Used Cylinder Head
Rocker cover and riser
Valve train
Exhaust manifold

Industrial Heavy Duty Pallet Racking Components

Skylarc Ref Y123645

Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 2x 3300mm high, 840mm wide vertical frames.
- 2x 3650mm hight, 840mm wide vertical frames.
- 24x 2700x85x50mm horizontal beams.
- 40+ adjustable horizontal beam cross members.
- 10x MDF or plywood Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking are NOT included.
Note - Buyer will need to decommission the Racking themselves and will need to bring the appropriate manpower to assist.

Seal-Lock Crack Repair Kit

Skylarc Ref X124242

Model: Seal-Lock SLK-100 Starter Kit
Cast iron, cast aluminum block and head repairs
Contains
Air hammer
Taper plugs
Seal locks
Seal lock fluid weld
Jig
Manual

Steel Workshop Cupboard and Contents

Skylarc Ref T124290

Angle steel frame
3mm steel sides and top
Contents of steel blocks

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley

Skylarc Ref S123847

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley.
Heavy duty steel frame.
Adjustable shelves supported by removable 19mm diameter steel rods, see photos.
Plywood shelf inserts.
125mm diameter heavy duty castor wheels.
Solid heavy duty versitile unit.

12x Assorted Adjustable Hand Reamers

Skylarc Ref F123652

12x Assorted Adjustable Hand Reamers.
Assorted sizes.
Condition - Most size markings are worn off. Some are missing Cutter Blades.

6 x New 10 Litre Drums

Skylarc Ref N123660

Ican 10 litre drums
Part 001021
2 x Pour lids with nozzle
Part 001380
4 x pump storage lids
Part 001045

Oil Transfer Pump on Trolley

Skylarc Ref T123718

Single phase motor
Running small electric oil pump
Mounted on hand trolly
Inlet and outlet hoses

Heavy Duty Mobile Workshop Storage Shelf Trolley

Skylarc Ref Q123845

Heavy Duty Mobile Workshop Storage Shelf Trolley.
Heavy duty steel frame. .
Plywood and MDF shelves.
125mm diameter heavy duty castor wheels.
Solid heavy Duty unit.

Collet Chuck Set

Skylarc Ref P124234

Grod-Tast ER40 collet chuck set
24 x collets (one broken)
NT40 spindle
In case

Pair of Adjustable Jack Stands

Skylarc Ref Q124339

Pair of Adjustable Jack Stands.
No ID plate visible on either unit so manufacturer, model and weight specs unknown.
Adjustable height from 290mm to approx 465mm.
220mm diameter bases.

Detroit Series 60 Crankshaft

Skylarc Ref M123997

Detroit Diesel Series 60 Crankshaft
Standard unground

Large Industrial Cooling Fan

Skylarc Ref W123565

Imasu brand
800mm diameter
On wall mount
Will be removed for collection

Steel Framed Ply Top Workbench

Skylarc Ref M124257

Box steel frame
21mm ply to contents not included

2x Partial 205L Barrels of Donaldson Heavy Duty Coolant Premix

Skylarc Ref H123706

2x Partial 205L Barrels of Donaldson Heavy Duty Coolant Premix.
Donaldson Part No. P901852.
One 205L barrel feels mostly full, second barrel seems roughly 1/4 full. Have not been opened for verification for safery reasons.
Leftover Workshop supply stock.

PDL Soft Starter

Skylarc Ref V123590

Model: PDL RVSX-22.5 Reduced Voltage Starter
22.5 amps
380-480 volts
In box
Appears new

Urano Steam Cleaner

Skylarc Ref Z123932

Interpump Group WS202 high pressure pump
200 bar pressure
Three phase motor
Hose
Some gun parts
Diesel powered heater
Faulty

2x Lengths of Steel Beams

Skylarc Ref M123685

2x Lengths of Steel Beams.
Includes:
- 1x I-Beam unit at approx 8500x210x135mm.
- 1x U shaped beam unit at approx 6460x200x80mm.
Both units very rusty with flakes of rust falling off.
Auction is for the above mentioned items only, all other items seen in photos are not included. See our other listings for those items.

Universal Fuel System Priming Kit 50030

Skylarc Ref V124344

Universal Fuel System Priming Kit 50030.
Includes primer tool with atta HDD hoses, 3x brass adapters, plastic case.
Case lock tab is missing.

Moore & Wright Imperial 6" to 9" Inside Micrometer w/ Mitutoyo Accessories

Skylarc Ref E124327

Moore & Wright Imperial 6" to 9" Inside Micrometer w/ Mitutoyo Accessories.
Micrometer made in England by Moore & Wright.
6 to 9 inch size.
Includes 3x Mitutoyo accessory units, see photos.
Includes original case.

Metal Workshop Light Duty Storage Cabinet

Skylarc Ref E124353

Metal Workshop Light Duty Storage Cabinet.
Black finish
Four inner adjustable shelves.
Lockable, key is missing.
Items seen within Cabinet are not included.
Condition - Appears to be a new unit showing not much wear though the doors have a large gap between them and lower front edging panel appeara separated from sides. Unit may need some repair or reattaching of panels.

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley

Skylarc Ref R123846

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley.
Heavy duty steel frame.
Adjustable shelves supported by removable 22mm diameter steel rods, see photos.
Plywood shelf inserts.
100mm diameter heavy duty castor wheels.
Solid heavy duty versitile unit.

Muti Drawer Parts Bin Units w/ Assorted Brass, Copper Washers, Rings & More

Skylarc Ref H123654

Muti Drawer Parts Bin Units w/ Assorted Brass, Copper Washers, Rings & More.
Blue 25-drawer unit 400x165x320mm.
Red 35-drawer 2-piece unit 400x165x465mm.
Mist drawers contain assorted rings, Washers, and similar items. Materials include brass, copper, steel, Cork, plastic versions. See photos for further details on items Included within drawers.

2 x Super Charge 24v Chargers

Skylarc Ref Q123559

Model: Super Charge 2410MASTPP
24 volt
No power plugs or alligator clips
Unknown operating condition

Draw Unit and Contents of Taps and Accessories

Skylarc Ref S124211

Thread gauges
Easy outs
Wide selection of taps and some dies
Approx 25 taps total

Cummins KTA Marine Exhaust Manifold

Skylarc Ref O123765

Marine exhaust manifold

Large Industrial Hydraulic Ram

Skylarc Ref A123699

Industrial Hydraulic Ram.
Unknown model and specs.
Main cylinder approx 1060mm long, 165mm diameter.
Unit appears to have been cut off from a larger assembly, see photos.

Pneumatic Oil Pump

Skylarc Ref E123859

Model: Samoa Pump Master 2
Air operated oil drum pump

Set of Milling Machine Cutters

Skylarc Ref S124237

2mm to 12mm milling cutters
6mm is broken
In case

Powerbuilt 3-Ton Trolley Floor Jack

Skylarc Ref R124366

Powerbuilt 3-Ton Trolley Floor Jack.
Lifting range from 139mm to 495mm.
Lifting cup approx 115mm diameter.

Large Steel Wheeled Steel Rack

Skylarc Ref L123632

Multilevel steel materials rack
4 levels
5mm plate steel worktop
On heavy duty wheels
Contents of steel

Steel Workbench

Skylarc Ref A124271

3mm steel top
Rolled edge
Angle steel frame
Shelf

Protool Heavy Duty Drill on Stand

Skylarc Ref W124293

Protool DRP 32-4 heavy duty drill
Single phase
1700 watt
4 speed gearbox
Fire currently fitted with 16mm drill chuck
On adjustable height stand
Manual

Caterpillar Diesel Generator Control Unit

Skylarc Ref D123962

Caterpillar Diesel Generator Control Unit.
The following comomnrts have visible part numbers:
Overall main panel mounting frame 104-7287
- Caterpillar branded digital control unit model 130-9716.
- Start stop control panel 103-1837 3.
- control panel 7C1009.
- control panel 7C0972 2
All mounted in a yellow finished Steel casing.
Condition - Removed from failed diesel generator unit. Age of Assembly is in unknown.

M&W Moore & Wright 12" to 16" Imperial Outside Micrometer

Skylarc Ref S123821

M&W Moore & Wright 12" to 16" Imperial Outside Micrometer.
Part No. 1040.
Includes wood case.
Latches on wood case are broken off.

2 x Mobile Ply Panels

Skylarc Ref X123878

Steel frames
Ply panels
On heavy duty swivel castors
Each panel 1860mm wide x 1690mm tall

Cummins 855 Crankshafts and Camshafts

Skylarc Ref Z123750

3 x standard used crankshafts (not ground)
Used camshaft
Reconditioned camshaft

Pallet of Komatsu Spares

Skylarc Ref V123772

Fuel rails
Belts
Gaskets
Bearings
Oil seals

Peacock Centricator

Skylarc Ref O124233

Model: Peacock Centricator PCC
In case

Froude Hydraulic Dynamometer

Skylarc Ref W123721

Model: Froude DPX7D
Rated for 3000hp at 1000/2300 rpm
Includes a wide range of accessories
Including large steel engine mounting plates and rails
Pipe work
Boxes of parts
EX Australian military

Pulsi 12v Fuel Pump

Skylarc Ref F123860

Model: Pulsi 000363020
12 volt diesel delivery pump

Spool of Wire Rope

Skylarc Ref L123658

Part spool of 9mm wire rope

Newen Pre-Combustion Counterboring Tool

Skylarc Ref E124249

Newen Pre-Combustion Counterboring Tool PCC100
Includes jig
Micrometer
Spacers

TBP 500 Battery Tester for 12V Automotive Batteries

Skylarc Ref D124326

TBP 500 Battery Tester for 12V Automotive Batteries.
160Ah max.
Sterl casing measures approx 270x230x110mm.

PDL Microdrive Variable Speed Drive

Skylarc Ref T123588

Model: PDL Microdrive Elite ME 6.5
6.5 amps
230 - 480 volts
In box with manual
Some case corrosion from storage

5 Ton Chain Hoist

Skylarc Ref T123952

Kito brand
5 ton block and tackle

Part 200 Litre Drum Castrol Oil

Skylarc Ref F124276

Castrol Vectron 15W-40 CL-4 PLUS SL/E7
Approx 1/3 of a drum left
For specs
https://www.rdp.co.nz/products/castrol/castrol-vecton-15w-40-cl-4-plus-sl-e7

Valve Guide Installation Kit

Skylarc Ref A123829

Kline valve guide Installation kit
11/32"
In case

Ridgid No. 35 Hex Wrench

Skylarc Ref F123600

Ridgid No. 35 Hex Wrench.
Made in USA.

Cummins KTA Marine Exhaust Manifold

Skylarc Ref P123766

Marine exhaust manifold

4x Commercial Tyres w/ Wheels, 16.5" Rims

Skylarc Ref J123682

4x Commercial Tyres w/ Wheels, 16.5" Rims.
Steel rims are marked with "Use 16.5 Dia tire"
Tyres are Goodyear Super Single tubeless, 12-16.5 NHS
Condition - Tyres show heavy wear and usage and weathering from long term outside storage. Steel rims might be salvageable for reconditioning and reuse. Rims show some rusting, some bent edging. See photos for further Condition details.

5 Small Hydraulic Motors

Skylarc Ref R123716

Model: Sauer Danfoss ONSS 80

Glass Lapping Plate

Skylarc Ref G123861

Glass lapping plate in wooden case
300mm x 300mm

Caterpillar Transmission Shift Analyzer Kit 1U7447

Skylarc Ref T124342

Caterpillar Tools Service Tech Transmission Shift Analyzer Kit.
Kit No. 1U7447.
Includes Tester unit, Assorted Cabling (see photos), instruction sheet, and plastic case.
Condition - Unable to power on as special AC Power Adapter cable is missing. Tester is missing its cover. Unknown if any other original accessories are missing.

Large Tread Repair Kit w/ Assorted Threaders, Inserts, & More

Skylarc Ref L123840

Large Tread Repair Kit w/ Assorted Threaders, Inserts, & More.
Includesrhe following Full Torque branded items:
- #3 Morse Taper driver extention FTDEXT
- size 11 finishing tap FT11FT
- size 11 roughing tap FT11RT
- spade drill Holder FTSDH1013.
- 3x thread repsi inserts MM091304A.
Includes other items including l:
- 2x Lock-N-Switch C4PSF Piloted Spot facer Cast master.
- 6x other assorted tapers, bolt, etc,
Includes hard case.
Condition - Many items appear as new, unused. A few loose items show some usage. Case shows wear.

Medium Duty Adjustable Steel Workshop Shelving

Skylarc Ref D123702

Medium Duty Adjustable Steel Workshop Shelving.
15x 910x605mm Shelving sections.
Can be fully dissasembled for buyer to transport.
Unit shows heavy wear and usage.

W&P 500ft/lbs Torque Wrench, 1" Driver Head

Skylarc Ref V124370

500ft/lbs Torque Wrench.
1" Driver Head.
W&P branded.
Total tool length 900mm.

M&W Moore & Wright Imperial 6" to 7" Inside Micrometer w/ Wood Case

Skylarc Ref F124380

M&W Moore & Wright Imperial 6" to 7" Inside Micrometer with Wood Case.
Tool shows very light signs of usage. Case exterior shows more wear from workshop storage.

Heavy Duty Workshop Table Workbench

Skylarc Ref U123849

Heavy Duty Workshop Table Workbench.
75x75mm heavy Steel frame.
19mm thick MDF board top.
Note - Items seen on and around table are not included.

Industrial Medium Duty Shelving Components

Skylarc Ref B123960

Industrial Medium Duty Shelving Components.
Includes:
- 80x steel Shelf sections each approx 910x600x30mm.
- 20x vertical support units each.
approx 2220mm tall by 55x25mm
- Box of Shelving Support Brackets.
Condition - Some rusting to many components. Box of brackets appears to be too few to cover most of the included shelving sections.
Items are on three pallets for buyer pickup.

Pneumatic Air Nibbler Tool

Skylarc Ref B124324

Pneumatic Air Nibbler Tool.
ID plate missing so brand, model and specs unknown.

Toolbox of Valve Reseating Cutters

Skylarc Ref B124246

18 assorted valve reseating cutters
Approx 50 assorted pilots
Mostly Warren and Brown
In metal toolbox

200 Litre Drum Mobil Oil

Skylarc Ref B124272

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

10 x Morse Taper Drill Bits

Skylarc Ref M124205

31/32", 1", 7/8", 3/4", 49/64", 17.5mm, 16.75mm, 3/4", 17.5mm, 5/8"

Office Workstation Desk w/ Chair & Mobile Drawer Unit

Skylarc Ref K124307

Office Workstation Desk w/ Chair & Mobile Drawer Unit.
Includes:
- 1800mm wide office desk with Faux Wood Laminated top and grey laminate support.
- matching grey laminated mobile drawer unit 505x460x655mm.
Gas-lift desk chair with padded black vinyl surfaces.
Auction includes above items only, all other items seen on and around desk are NOT included.
Condition - Some wear to vinyl on chair. Dusty surfaces.

Scheppach BG200 Bench Grinder

Skylarc Ref B123882

Scheppach BG200 Bench Grinder.
Single phase.
Uses 200mm diameter Grinding wheels.
Built in worklight.
2850rpm.
Condition - Grinder operates. Safety guards missing over both Grinding platforms.

Turbocharger Assembly for Industrial Diesel Engines

Skylarc Ref N123608

Turbocharger Assembly for Industrial Diesel Engines.
ID plate lists the following numbers:
- NB0562
- 8926686
- F12020161.
Unable to find details on unit online.
See photos for further details on design of unit.
Includes gasket set.
Condition - Unit appears unused but shows surface rust spotting from long term storage.

2x Diesel Engine Turbocharger Lagging Wraps 49181-14410 by Mitsubishi

Skylarc Ref O123609

2x Diesel Engine Turbocharger Lagging Wraps 49181-14410 by Mitsubishi.
Leftover unused part supply stock. Bags still sealed.

3 Heavy Duty Wheeled Dollies

Skylarc Ref N123634

Heavy wheeled trolleys
Ex engine moving
Each one 1220mm long x 290mm wide x 400mm tall
Mounting slots in top plate
250mm diameter wheels with solid rubber tires
Two swiveling sets one fixed set

Messer Cast Iron Welding Rods

Skylarc Ref X123722

Messer MG289 Welding Rods
3.2mm diameter pack almost full
2 boxes of random mixed rods

Custom Desktop Midtower Computer w/ Intel Core i5 & Monitor

Skylarc Ref M123893

Memory

4 to 7 GB

Hard Drive Size

500 to 999 GB

Cores

4

Custom Desktop Midtower Computer w/ Intel Core i5 & Monitor.
Processor - Intel Core i5-2400 at 3.20GHz.
4Gb RAM
500Gb storage drive, wiped of old user data and operating system.
Microsoft Windows 7 Pro reinstalled and ready for new user setup, product key sticker code is attached to case.
Cooler Master Midtower case.
Cooler Master 460W PSU.
Gigabyte GA-Z68MA-D2H-B3 motherboard.
Samsung 22" monitor Model S22A100N.
Logitech USB keyboard and mouse.
Includes power cables, and D-Sub cable.
Condition - Dusty interior. Exterior scratches, wear marks, dust etc.

Mill Lockdown Kit

Skylarc Ref Q124235

Mill Lockdown Kit
Missing some parts
24.8mm wide T nuts

Three Phase Extension Cord

Skylarc Ref Q124287

15 metre three phase cable
30 amp male plug
20 amp female plug

SPM Shock Pulse Meter 43A w/ Shock Pulse Transducer

Skylarc Ref B124350

SPM Shock Pulse Meter 43A w/ Shock Pulse Transducer.
Made in Sweden.
Pulse Meter model 43A.
Transducer model 10190.
Includes case
See photos for details on other included components.
Battery condition Unknown.

Dexion Workshop Shelving

Skylarc Ref V124292

Bolt together shelving
Dexion 140

Mitsubishi Intercoolers

Skylarc Ref U123745

Ex Mitsubishi S16R
Intercooler dimensions 770mm x 120mm x 60mm
Attached to housings

Steel Workshop Trolley

Skylarc Ref S124289

3mm steel top
Box steel frame
Heavy duty swivel wheels

Mitutoyo Imperial Depth Micrometer w/ 2x Telescopic Gauges

Skylarc Ref U123823

Mitutoyo Imperial Depth Micrometer w/ 2x Telescopic Gauges.
Unknown Mitutoyo model number of depth Micrometer. Includes case with assorted accessories, see photo.
Auction also includes 2x Mitutoyo Telescopic Gauges D and E.
Condition - Shafts on Telescopic Gauges show rust spotting. Depth gauge case exterior shows moderate Workshop wear.

Chubb Fireproof Safe

Skylarc Ref C123935

Large fireproof safe
Adjustable shelves
Lockable but key is missing

Set of Starrett Parallels

Skylarc Ref U124239

Model: Starrett No.S 154 L Parallels
One missing
In case

Large Lathe Boring Bar

Skylarc Ref A124219

350mm long x 29mm x 26mm
S32U-CTFPR16

Large Industrial Cooling Fan

Skylarc Ref U123563

Imasu brand
700mm diameter
On pole mount
Will be removed for collection

Steel Workshop Trolley

Skylarc Ref U124291

3mm steel top
Box steel frame
Swivel wheels one end fixed the other

Steel Workshop Trolley

Skylarc Ref C124299

3mm steel top
Box steel frame
Swivel wheels one end fixed the other

Vintage Wood Workbench

Skylarc Ref I124357

Vintage Wood Workbench.
Thick wood support with 45mm thick wood board lower shelf.
45mm thick wood board top with a covering of 1mm thick sheet steel.
Items seen on Workbench are not included.
Bench shows typical workshop wear and usage. A sturdy unit.

38-46mm Adjustable Hand Reamer by T&J

Skylarc Ref S123639

38-46mm Adjustable Hand Reamer.
Made in England by Taylor & Jones.
Part No. H15.
Size range from 38.10mm to 46.03mm.
Includes case.

Sykes-Pickavant Circlip Tool Set 028300

Skylarc Ref Z124348

Sykes-Pickavant Circlip Tool Set.
Set No. 028300
See photos for details on Included components.
Metal case shows rust spotting on exterior.
See the Sykes-Pickavant weblink below for further item details:
https://www.sykespickavantexport.com/Products/Sykes-Pickavant/workshop/general/general-tools/63027/028300

Hitachi 500kg Motorised Chain Hoist

Skylarc Ref N123712

Hitachi 500kg Motorised Chain Hoist.
Type No. 1/2SH2
6m Lifting Chain length.
3-phase.
Manufactured in 1987.
Includes two damaged pendants.
Operational condition is unknown.

Large Plastic Ute Toolbox

Skylarc Ref D123858

Waltex Ute/Truck toolbox
Gas strut lid
Lockable but no key

Heavy Duty Mobile Workshop Shelf Trolley

Skylarc Ref L123684

Heavy Duty Mobile Workshop Shelf Trolley.
MDF board top.
Steel frame.
150mm diameter wheels.
Steel bar push/pull handle at one end.
Shows typical workshop wear and usage. Some holes in MDF top.

Large Hydraulic Ram

Skylarc Ref Y123697

Large Hydraulic RAM.
Unknown model and specs.
Main cylinder approx 1370mm long, 200mm diameter.
RAM shows moderate usage and wear.

Kent-Moore Cam Gear Pilot J-35906

Skylarc Ref Y124347

Kent-Moore Cam Gear Pilot tool.
Part No. J-35906
Made in USA.

Cummins 855 Block, Camshaft, Crankshaft and Heads

Skylarc Ref X123748

Used Cummins 855 parts
6 x cylinder heads
Crankshaft
Camshaft
Block

2 Pallets Steel Bits and Pieces

Skylarc Ref M124283

Assorted steel industrial fittings
Boxes of large bolts and nuts
Gears
Large diameter rod
Two large round flat plates
Two shaft stands

Small Steel Trolley

Skylarc Ref R124288

3mm steel top
Box steel frame
Heavy duty swivel wheels

Large Wall Mounted Office Bookshelf

Skylarc Ref I124305

Large Wall Mounted Office Bookshelf.
Laminated MDF construction.
Five adjustable shelf pieces.
Note - Buyer should bring extra hands and basic tools for removing unit from wall.
Items seen on shelves are NOT Included.

Heavy Duty Mobile Specialised Trolley

Skylarc Ref S123873

Heavy Duty Mobile Specialised Trolley.
Heavy steel frame with steel Castors.
Main stationary platform approx 735x540mm and 955mm above floor.
Smaller platform attached to treaded rod for adjusting height, see photos.
Unsure as to its intended purpose, see photos for further trolley design details.
Condition - Some rusting to components..

34-38mm Adjustable Hand Reamer by Solar

Skylarc Ref E123651

34-38mm Adjustable Hand Reamer by Solar.
Part No. H14.
Range from 34.1mm to 38.1mm.
Includes box.
Condition - Appears to be unused old stock. Box shows storage wear.

Large Industrial Cooling Fan

Skylarc Ref X123566

Imasu brand
800mm diameter
On wall mount
Will be removed for collection

Avery 100kg Capacity Industrial Floor Scale

Skylarc Ref W123695

Avery 100kg Capacity Industrial Floor Scale.
Model 1632.
Weighs up to 100kg in 500g incriments.
Weighing base is approx 480x340mm and 120mm above floor.

Small Steel Tank on Stand

Skylarc Ref L123580

Steel tank on stand
Tank dimensions 350mm x 350mm x 200mm
Tap in front
Filler filter

Perkins Sabre M135 Diesel Engine

Skylarc Ref S123743

Used engine unknown condition
Marine engine
Suit Spares

4x Hollow Steel Flag Poles

Skylarc Ref P123688

4x Hollow Steel Flag Poles.
All are around 9000mm in length.
Diameters range from approx 75mm at Bottoms to 60mm at tops.
Two units have eye loops at top for rope.
Condition - Units have been stored outdoors for some time. Rusty surfaces, green residue, etc. Could be refurbished for flag usage.
Auction is for the steel flag poles only, Other items seen in photos are not Included. See our other listings for those items.

Large Office L-Shaped Desk Workstation w/ Chair & 3x Drawer Units

Skylarc Ref D124300

Large Office L-Shaped Desk w/ Chair & 3x Drawer Units.
- large 2400x2400mm corner desk
- 1x Mobile Drawer unit 460x460x600mm.
- 2x non-mobile drawer units each 460x460x570mm.
- gas lift desk chair with padded black vinyl.
Condition - Some wear to seat vinyl. Broken plastic on one drawer handle.
Note - Auction includes above items only, all other items seen on and around desk in photos are NOT Included.
Buyer may need to dissasrnble Desk on pickup as Desk may be too large to move out available doors.

2 x Large Bearing Pullers

Skylarc Ref X124268

200mm and 250mm wide
One missing a threaded rod

Forklift Mounted Drum Tipper

Skylarc Ref D123936

Slip on drum carrier/tipper

Large Steel Cupboard

Skylarc Ref Y124295

Steel storage cabinet
5 levels

7 Assorted Morse Taper Drill Bits

Skylarc Ref N124206

38mm in No.5 - No.4 morse taper adapter
1 15/16", 1 5/32", 47/64", 5/8", 41/64", 11/16"

Archer Tapping Chuck

Skylarc Ref N124232

Model: Archer No.20
Tapping chuck
No.2 morse taper

4x Commercial Tyres w/ Wheels, 19.5" Rims

Skylarc Ref I123681

4x Commercial Tyres w/ Wheels, 19.5" Rims.
Steel rims are marked with "DO 19.5" x 11.75" T.
Tyres are Denman Skid Steer 15/19.5 NHS tubeless.
Condition - Tyres show heavy wear and usage and weathering from long term outside storage. Steel rims might be salvageable for reconditioning and reuse. Rims show some rusting. See photos for further Condition details.

Large Water Pump

Skylarc Ref F123938

Model: Regent Pumps 150-320-B310
150/32 impeller pump
Powered by 30Kw three phase motor
On steel frame

Large Lot of Drill Bits

Skylarc Ref F124224

Large lot of twist drills
Approx 90 drills total
Some long series
Box and drill holder

Small Cooling Tower

Skylarc Ref J124280

Mesan Cooling Tower
Model: MS-8
No motor or accessories
Housing only

PDL Variable Speed Drive

Skylarc Ref Y123567

Model: PDL Microflo MF3-6.5
Three phase 6.5 amp

150mm Diameter 16 Bar Water Irrigation Valve

Skylarc Ref R123612

150mm Diameter 16 Bar Water Irrigation Valve.
Made in NZ by Gillies Foundary & Engineering Limited.
Manufactured in 2000.
150mm inner diameter on each end.
16 Bar max pressure.
Condition - Unit shows use, wear, some rusting.

Reintjes Hydraulic Transmission

Skylarc Ref D123598

Model: Reintjes 53494 WAF 44
Manufactured 1987
Input capacity 500kw
Input speed 1650 rpm
Unknown condition

Pallet of Assorted Industrial Supplies

Skylarc Ref W123643

Three phase plugs and switches
Woodward low voltage load sharing and speed controls
Engine parts
Flashing light
Roll of cable
Large fuel filter housing
Bolts and nuts

Pallet of Three Phase Electrical Components

Skylarc Ref J123656

Three phase plug points
Breakers
Part electric motor

Heavy Duty Trolley

Skylarc Ref G123913

Heavy duty steel construction
Forklift points
Swivel wheels front

Medium Duty Adjustable Steel Workshop Shelving

Skylarc Ref C123701

Medium Duty Adjustable Steel Workshop Shelving.
10x 910x605mm Shelving sections.
Can be fully dissasembled for buyer to transport.
Unit shows heavy wear and usage.

Metal Shear on Stand

Skylarc Ref W123877

Bench mounted metal shear
Installed on pedestal base
150mm cutting length

Dual Signal Mechanical 160Nm (120ft/lbs) Torque Wrench by Warren & Brown

Skylarc Ref F124328

Dual Signal Mechanical 160Nm (120ft/lbs) Torque Wrench by Warren & Brown.
Model No. 322000.
Range is 20-160Nm or 20-120ft/lbs.
1/2" socket pin is missing, see photos.

30+ Assorted Imperial & Metric Sockets, Breaker Bars, & More

Skylarc Ref M123841

30+ Assorted Imperial & Metric Sockets, Breaker Bars, & More.
Includes 26x Assorted sockets in imperial and Metric Sizes. All appear to be 3/4" Drive size. Brands include Gift, King Tony, Tone, Kokon, and unbranded. Sizes range from 22mm up to 2 3/4 Inch.
Includes 2x 3/4 drive Breaker Bars.
Includss one spin Wrench.
Includes one large Allen Hex Key
Condition varies with each item.

2x Dinet Diesel Transmission Control Cables 68 1601 11

Skylarc Ref C123623

2x Dinet Diesel Transmission Control Cables.
Both are Part No. 68 1601 11.
3-metre length each.
Both units are new unused leftover parts supply stock. One has been opened by us for photos only.
See the Dinet weblink below for further details:
https://www.dinet.biz/Product/voith/68-1601-11-cable-1-3m/

Standard Office Workstation Desk

Skylarc Ref K123969

Standard Office Workstation Desk.
Faux Wood Laminated MDF top with grey laminated support panels.
Some marks to surfaces, dust etc from use.
Desk only, no chair or other accessories included.

Wall Mounted Office Bookshelf Unit

Skylarc Ref R124314

Wall Mounted Office Bookshelf Unit.
Faux Wood laminate MDF.
Four adjustable shelf pieces.
Will need square head driver to remove from wall.
Items seen on shelf are not included.

Height Adjustable Office L-Shaped Corner Desk Workstation

Skylarc Ref X123696

Height Adjustable Office L-Shaped Corner Desk Workstation.
Unsure of manufacturer as ID label is worn.
White laminate top with light grey support frame.
Adjustable height with electric powered motor.
Control buttons under Desktop.
Condition. Some surface marks, tape residue and wear from use. Motor functions have not been tested.

Low Heavy Duty Workshop Platform Trolley

Skylarc Ref K123891

Low Heavy Duty Workshop Platform Trolley.
Heavy Steel frame with 3mm thick steel plate top surface.
200mm diameter heavy duty Castors.
Note - Items seen on trolley are not included.

MotoMeter Automotive Compression Tester Kit

Skylarc Ref W124345

MotoMeter Automotive Compression Tester Kit.
Type No. 23.02.1002.
Includss Assorted accessories (see photos) and wood case.
Condition - Wood case latches are broken off. Some damage to wood case. Unknown if any original accessories are missing.

Vintage Herbert Mooris 3-Ton Mechanical Chain Hoist

Skylarc Ref M123711

Vintage Herbert Mooris 3-Ton Mechanical Chain Hoist.
Made in England.
3-ton capacity.
Large hooks with approx 50mm inner gap

Small Steel Tank on Stand

Skylarc Ref M123581

Steel tank on stand
Tank dimensions 350mm x 350mm x 200mm
Tap in front
Filler filter

Small Heated Parts Washer Bin

Skylarc Ref Z123724

Galvanized steel bin
Two elements
Single phase
Elements do not heat up
Unknown fault
Internal parts tray

Two Compressors and Air Cooler Dryer

Skylarc Ref I123915

Atlas Copco GA18
Atlas Copco GA22
Atlas Copco FDA 25
All parts only in unknown condition

Industrial Hydraulic Ram

Skylarc Ref Z123698

Industrial Hydraulic Ram.
Unknown model and specs.
Main cylinder approx 530mm long, 80mm diameter.
RAM shows moderate usage and wear.

Pallet of Assorted Industrial Items

Skylarc Ref Y123957

Pallet of Assorted Industrial Items.
Assorted stuff, leftover wire, use switches, used Gauges, Assorted belts, and more. Call it a "Mystery auction" of items.
Condition varies greatly with each item. Some appear unused, others show widely varying levels of usage.

Industrial Heavy Duty Pallet Racking Components