SKYLARC'S INDUSTRIAL PLANT AND MACHINERY AUCTION

Three Phase Workshop Press

Skylarc Ref L176069

Model Scott HEP-30 hydraulic press.
Date of manufacturing 2011.01
30 ton capacity
690mm between uprights
Electric control panel with key switch
Start stop and emergency stop pushbuttons on control panel
Three phase plug fitted to control panel
Hydraulic power pack mounted on side frame
Pressure gauge on hydraulic power pack up to 100 bar
Steel frame construction
320mm x 495mm x 30mm press plate

Hypertherm Powermax45 plasma cutting system

Skylarc Ref W177536

Brand Hypertherm
Model Powermax45
Plasma cutting system
Front panel current control marked 20 to 45 amps
Input rating plate shows 200 to 240V single phase 50 60Hz
Maximum output current 45A
Open circuit voltage U0 275V
Label shows duty cycle ratings at 20A 88V and 20A 108V
Rear label shows IP23CS enclosure rating
Made in USA according to rating label
Unit includes Hypertherm torch shown in photos
Torch has trigger switch
Work clamp lead attached to unit
Air inlet fitting on rear panel marked 8 bar max 125 psi max
On off switch on rear panel
Carrying handle on top of unit
Fabric shoulder strap attached to unit
Fitted with three pin 15amp plug

Stainless Industrial Screw Conveyor

Skylarc Ref F175803

Stainless Industrial Screw Conveyor.
4-pin 500V 16A plug.
Screw length approx 3300mm.
200mm screw inner diameter.
Very dirty, needs a heavy cleanup.

Bailey Ladderweld Deluxe Order Picker 1.8m

Skylarc Ref G177520

Brand: Bailey
Model: Ladderweld Deluxe Order Picker
Model number: FS10370
Platform height: 1.8 m
Material: aluminium construction
Platform type: fully enclosed work platform with guardrails
Front access via inclined ladder section with handrails
Platform has ribbed surface panels
Unit is mounted on four swivel castor wheels
Castors include a foot operated braking or lift mechanism
Base frame constructed from rectangular aluminium sections
Diagonal bracing on rear frame for structural support
Non slip treads on access steps
Rubber feet fitted to ladder legs
Label indicates made to AS NZS 1892 ladder standards

3 Roller Sheet Bending Machine

Skylarc Ref S178000

Manufacturer ACL Machinery Co. Ltd
Model W11-1.5X1300
Serial number 765587
Manufacture date 2006-03
Capacity 1.5mm
32amp 4 pin plug
Rollers are 1200mm wide

Appears to be missing some caster wheels.

Ridgid 535 Vintage Pipe Threader

Skylarc Ref E175958

Ridgid 535 Vintage Pipe Threader.
Single phase.
1/8" to 2" capacity.
Older unit but has new power cord and runs, see video.
No extra attachments or accessories included.
Would benefit from a good cleanup.

14 Galvanised steel stair treads with yellow nosing

Skylarc Ref L175835

14 Galvanised steel stair treads
Each approx 900mm x 250mm
Yellow anti-slip nosing along front edge of each tread
Open bar grating pattern
Side plates with mounting slots and holes
Individual tread shown from top and underside
Material appears to be galvanised steel

Sandvik Coromant 40mm Dia Indexable Boring Bar

Skylarc Ref Y175978

Sandvik Coromant 40mm Dia Indexable Boring Bar.
Part No.A40V-MWLNR 08.
400mm length.
40mm diameter shank.

Steel Beam 7.1m

Skylarc Ref C177334

10mm thick top & bottom
8mm centre

Assorted Stainless, Galvanised, Mild Steel Pipes, Box Angle Lengths

Skylarc Ref Q175944

Assorted Stainless, Galvanised, Mild Steel Pipes, Box Angle Lengths.
Lengths vary with longest pieces up to 6-metres.
Some are off cuts while others are full lengths.
Leftover factory materials stock.

ESAB Buddy Tig 160 Welder w/ Welding Trolley

Skylarc Ref I175806

ESAB Buddy Tig 160 Welder w/ Welding Trolley.
250V 15A plug.
Argon Gas regulator attached.
Grounding cable and clamp.
Tig Welding end.

16mm Underground Electrical Cable - 39 Metres

Skylarc Ref W177328

Approx 39m remaining
1C
16mm2

Sandvik Coromant CoroTurn RC 50mm Dia Indexable Boring Bar

Skylarc Ref V175975

Sandvik Coromant CoroTurn RC 50mm Dia Indexable Boring Bar
Part No.A32U-DCLNR 5.
355mm length.
50mm shank.diamter.
Tool appears as new unused, no mounting bolt marks or wear on indeable tip. Some storage scratches, dust.

Sandvik Coromsnt Indexable Boring Head w/ Detachable 50mm Shank

Skylarc Ref R175971

Sandvik Coromsnt Indexable Boring Head.
Part No. R471.5-505636-16.
Includes attached 50mm diameter, 360mm long shank.
Total combined length 405mm

Sandvik Coromant Indexable Boring Head w/ 50mm Dia Shank Attachment

Skylarc Ref Q175970

Sandvik Coromant Indexable Boring Head.
Part No. R471.5-505636-16.
Head is attached to a 50mm diameter, 460mm long detachable shank.
Total combined length 505mm.
Mounting end of shank has a 63mm diameter sleeve attached, see photos.

12 Racking Crossbeams

Skylarc Ref H177339

2700mm long

32 Sheets of 20mm MDF

Skylarc Ref Q177322

Each sheet approx 2390mm x 895mm

Previously used as shelving so some edge scuffs etc

Assorted Off-Cut Steel Tubes, Box, Angle Lengths

Skylarc Ref Y175952

Assorted Off-Cut Steel Tubes, Box, Angle Lengths.
Lengths vary greatly with longest pieces up to approx 4500mm.
Various steel types including mild, galvanized, and stainless.

Large Lathe Boring Bar w/ Sandvik Coromant Cutting Head

Skylarc Ref Z175979

Large Lathe Boring Bar w/ Sandvik Coromant Cutting Head.
Boring bar, excluding head attachments, is 520mm long, 50mm diameter.
Indexable cutting head is Sandvik Coromant No.570-DCLNR-40-12-L.

Sandvik Coromant CoroTurn 107 50mm Dia Indexable Boring Bar

Skylarc Ref X175977

Sandvik Coromant CoroTurn 107 50mm Dia Indexable Boring Bar
Part No.A32U-SVUBR 3.
355mm length.
50mm shank.diamter.
Tool appears as new unused, no mounting bolt marks or wear on indeable tip.

Lifting Platform

Skylarc Ref X177355

Metal loading ramp platform.
Hinged ramp
Forklift holes for lifting

Large Caravan Awning

Skylarc Ref R177323

Approx 6.5m x 2.4m x 1.8m high
Includes poles, main cover and zip in walls

Has not been assembled and may or may not be complete

Sandvik Coromant CoroTurn 107 50mm Dia Indexable Boring Bar

Skylarc Ref W175976

Sandvik Coromant CoroTurn 107 50mm Dia Indexable Boring Bar
Part No.A32U-SVUBR 3.
355mm length.
50mm shank.diamter.
Tool appears as new unused, no mounting bolt marks or wear on indeable tip.

Industrial centrifugal machine with electric drive motors

Skylarc Ref G177312

Industrial centrifugal machine
Mounted on steel base frame
Two large vertical electric drive motors fitted
One smaller vertical electric motor fitted
Central blue cylindrical process chamber
Top stainless steel removable hopper on chamber

Sandvik Coromant Indexable Boring Head w/ 50mm Removable Shank

Skylarc Ref T175973

Sandvik Coromant Indexable Boring Head w/ Removable Shank.
Indexable Boring Head Part No. R471.5-505636-16.
Detachable shank.is 50mm diameter and 235mm long.
Total combined length is 280mm.
Note that shank has been cut shorter by previous owner.

Robuschi Pump System with Stainless Steel Tank and Pipework

Skylarc Ref B109925

System includes two Robuschi pumps.
Each pump is labelled as Pump #1 and Pump #2.
Pumps are mounted on a stainless steel frame.
System contains a stainless steel tank with an inspection hatch.
Pipework is comprised of stainless steel components.
Two large black cylindrical housings are mounted on top of the system.
Both pumps have attached valves and pipe fittings.
Stainless steel box housings are fitted at the end of the frame.
There is an electrical power inlet on one side of the system.
No information provided about model numbers or capacity.

Box Steel Heavy Duty Workbench 3000 x 1200 x 900mm

Skylarc Ref L177993

Heavy duty workbench.
Box steel frame construction.
length 3000mm.
width 1200mm.
height 900mm.

Box Steel Heavy Duty Workbench 3000 x 1200 x 900mm

Skylarc Ref M177994

Heavy duty workbench.
Box steel frame construction.
Overall length approximately 3000mm.
Overall width approximately 1200mm.
Overall height approximately 900mm.
Timber worktop surface.
Multiple front cupboards with hinged doors.
Metal door handles on front cupboards.
Metal hinges and latches on cupboard doors.
Open rear side with large storage compartments.
Lower shelf at one end on rear side.
Metal tool or accessory brackets mounted on one end panel.
Square cut outs in benchtop near corners.
Freestanding leg design with metal feet.
Worktop shows visible wear and surface marks.

Small steel anvil on base stand

Skylarc Ref Y177330

Small steel anvil
One flat working face
One tapered horn
Rectangular body
Base stand integrated with anvil
Base has four mounting holes
Top face has one round hole near one end

Assorted Metal Parts

Skylarc Ref O177320

Scrap?
Crate approx 1200 x 1000 x 1000mm
Various metals including Stainless steel

Steel Beam 4.9m

Skylarc Ref M177344

10mm thick

316 Grade Stainless Steel Pipes, 3x 50mm dia lengths

Skylarc Ref U175948

316 Grade Stainless Steel Pipes, 3x 50mm diameter lengths in auction
1.6mm side wall thickness.
Two full lengths at 6-metres each and the third pipe is slightly shorter at 5.57-metres.

40000 Senco Heavy Duty Galvanised Wire Staples - 16ga

Skylarc Ref H174947

4 Boxes of 10000
N21BAB
11mm crown
50mm leg

8-Metre 3-Phase 32A Power Extension Lead Cable

Skylarc Ref R175815

8-Metre 3-Phase 32A Power Extension Lead Cable.
Female plug end missing cap.
Very well used.

Large Lathe Boring Bar w/ Removable Indexable Cutting Head

Skylarc Ref A175980

Large Lathe Boring Bar w/ Removable Indexable Cutting Head.
Unknown manufacturer.
Boring bar size, excluding cutting head attachment, is 280mm long, 50mm diameter.
Indexable cutting head attachments is 60mm long and 75mm diameter at cutting face.
See photos for indexable cutter type details.

Grundfos CR20-05 Pump w/ 3-Phase Electric Motor

Skylarc Ref D175957

Brand Grundfos
Pump type CR20-05 A-F-A-E-HQQE
Pump model A96500511P11719
Pump serial number 0001
Pump frequency 50 Hz
Pump power P2 5.50 kW
Pump speed 2919 min-1
Pump flow Q 21 m3/h
Pump maximum head Hmax 73.4 m
Pump head H 58 m
Maximum pressure and temperature 16 bar slash 120 degC
Rotation CCW.
Motor type MG132SC2-38FF265-H3.
Motor number 85U17417.
Motor rated power P2 5.50 kW..
Motor weight 43 kg.
Motor thermal class F.
Motor protection type PTC 160 degC.
Motor enclosure IP55.
Motor efficiency class IE3.
Motor duty 2 pole S1.
Motor supply 50 Hz 380 to 415 V delta.
Motor current 11.0 A.
Motor speed 2920 to 2940 min-1 at 50 Hz.
Motor supply 60 Hz 380 to 480 V delta.
Motor current 10.6 to 9.30 A at 60 Hz.
Motor speed 3510 to 3550 min-1 at 60 Hz.
4-pin Plug rating 32 A, 500V
Hall Machinery Ltd tag on frame with model D CR20-05.

Steel Beam 5.7m

Skylarc Ref N177345

5750mm long
400mm high including legs

Steel Beam 5m

Skylarc Ref L177343

10mm thick top & bottom
8mm centre

HP EliteBook 840 G6

Skylarc Ref V177535

Memory

8 to 15 GB

Hard Drive Size

160 to 239 GB

Screen Size

14"

Core i5 8th Gen
8gb Ram
14"
Has been reset.

Grundfos dosing pump

Skylarc Ref D176061

Brand Grundfos
Series DDA
Type DDA 17-7 AR-PV/T/C-F-31U2U2IG
Model A97722998100000193P11504
Power supply 100–240 V AC
Frequency 50/60 Hz
Power consumption 24 W
Maximum pressure 7 bar
Maximum pressure 100 psi
Maximum capacity 17 l/h
Maximum capacity 4.5 gph
Ingress protection rating IP65
Enclosure rating NEMA 4X
Front display shows 17.0 l/h in manual mode
Pump head with plastic fittings is installed
Electrical cable is attached
Mounted on a metal base

3m Safety Equipment Parts

Skylarc Ref E177362

As photographed

16mm Nylon Rope

Skylarc Ref G177338

Bag is stamped 250 so possibly 250m long but has not been inspected or measured

Evacut 1-2 inch Reduced Shank Drill Bits

Skylarc Ref J177341

Brand: Evacut

Pallet of Assortdd Industrial Bearings, Gaskets, Valves, & More

Skylarc Ref J175989

Pallet of Assortdd Industrial Bearings, Gaskets, Valves, & More.
Wide range of new to very used on pallet.
Leftover new and used factory parts stock.

Optimum OptiGrind Industrial Bench Grinder GU25

Skylarc Ref J175807

Brand: Optimum Maschinen Germany GmbH.
Model: OPTIgrind GU 25.
Type: Bench grinder.
Year of manufacture: 2016.
Power rating: 1.5 kW.
Supply voltage: 415 V 50 Hz.
Speed: 2850 U/min.
Serial number: 23291609086.
Mounted on 1020mm tall heavy stainless steel pedestal stand.
Fitted with two 250mm diameter, 40mm wide grinding wheels.
Power connection via 5 pin industrial plug.
Plug rating: 16 A.
Plug voltage rating: 500 V 50 Hz.

316 & 304 Grade Stainless Steel Pipes, 3x 6-metre, 76mm dia lengths

Skylarc Ref R175945

316 & 304 Grade Stainless Steel Pipes.
All 3x pipes are 6-metre long, 76mm diameter, 1.6mm thick side walls.
One pipe is 316 grade and two pipes are 304 grade.
As new unused stock.

Werner PA208AZ Aluminium Extension Plank

Skylarc Ref U177352

Brand: Werner
Model: PA208AZ MK2
Product type: Task-Master aluminium extension plank
Material: Aluminium
Rated load: 330 kg at 2.0 m span
Label also shows 250 lbs 113 kg
Standard: AS/NZS 1577
Size retracted length: 2.44 m
Maximum extended length: 3.96 m
Width at overlap: 0.36 m
Width at ends: 0.30 m
Mechanical release button visible on side
Riveted construction at plank ends
Aluminium slat deck surface

Assorted Metal Parts

Skylarc Ref N177319

Scrap?
Various metals including Stainless steel

15-Metre 3-Phase 32A Power Extension Lead Cable

Skylarc Ref T175817

15-Metre 3-Phase 32A Power Extension Lead Cable.
Female plug end missing cap.
Many cracks in outer black rubber skin of cable.

3x PowerBor Annular Cutters, never used!

Skylarc Ref S176310

3x PowerBor Annular Cutters.
All M2
Cutting diameters are 13mm, 17mm, and 21mm.
Mounting Shanks all 25mm.
As new unused Cutters. Plastic cases show external fading and wear from long term workshop storage.

20-Metre 3-Phase 32A Power Extension Lead Cable

Skylarc Ref S175816

20-Metre 3-Phase 32A Power Extension Lead Cable.
Female plug is missing end cap.
Some cracks in cable outer skin.

Stoody alloy cored welding wire

Skylarc Ref E176062

Brand Stoody Company
Approx 14kg
Model 965-G
Product alloy cored wire
Diameter 0.045 inch
Diameter 1.2 mm
Type semi-automatic shielded arc wire
Label states wear-resistant hardfacing products
Packaging shows small diameter alloy cored wires
Net weight per box marked 4.54 kg

Boxes are unopened old stock
Wire inside box shown wrapped in plastic

Heavy Duty Steel Basket

Skylarc Ref F177389

Stainless steel industrial basket

4mm Stainless Steel Sheet Off Cuts

Skylarc Ref K177316

Believed to be stainless steel
Largest sheet approx 1600 x 1300 x 4mm

Assorted Bolts Screws Rivets and other hardware

Skylarc Ref Q177530

See photos

VDI 40 Tooling Holders, 9x Assorted Units

Skylarc Ref M175810

VDI 40 Tooling Holders.
All have 40mm diameter, 62mm long mounting shanks.
5x 110mm diamter Tooling heads and 4x 100mm diameter heads.
See photos for further details on Tooling types.

PFERD Carbide Rotary Burr Set

Skylarc Ref Q177504

Brand Pferd
Model HM-Frässtift-Set
Type TC burr set
Label text Assort de fraises carbure
Label text Juego de fresas HM
Series NEW COMBICUT
Marking MX NCC 6/10-01
Country of origin Germany

Aztec Master Flash Size 5 Roof Flashing Set

Skylarc Ref C177308

Aztec Australasia Standard Master Flash
Size 5
Code MF558
Material black EPDM
Pipe size range 105mm to 210mm
Base size 279mm

Assorted items

Skylarc Ref A177514

See photos

2x Stainless Steel Plates each 950x335x30mm

Skylarc Ref J176301

2x Stainless Steel Plates.
Each is 950x335x30mm.
Unknown what grade of Stainless steel these are.

Sandvik Coromant CoroTurn RC 50mm Dia Indexable Boring Bar

Skylarc Ref U175974

Sandvik Coromant CoroTurn RC 50mm Dia Indexable Boring Bar
Part No.A32U-DCLNR 5.
355mm length.
50mm shank.diamter.

Large Rolling Storage Box and assorted contents

Skylarc Ref C177386

MDF box on caster containing various treasure.

Pneumatic Press on Stand

Skylarc Ref P177997

Pneumatic press mounted on steel stand
Vertical pneumatic cylinder actuator
Table has central slot and multiple mounting holes
Foot pedal actuator mounted at base of stand

304 Grade Stainless Steel Pipe, 6-metre x 152mm dia

Skylarc Ref W175950

304 Grade Stainless Steel Pipe.
6-metre length, 152mm diameter, 1.6mm wall thickness.
ITMNZ AS1528.1 Hygienic tube T304L grade.
As new unused stock.

Tork Xpress Multifold Hand Towel Advanced 14 84 30, Bulk lot

Skylarc Ref M175602

Tork Xpress Multifold Hand Towel Advanced.
Item No. 14 84 30.
21x packs in bulk sealed bag. 185x sheets per pack.
Ea h sheet is 24x21cm.
Fits Torx H2 type Hand Towel Dispensers.
New in sealed bulk bag.

Industrial Vibration Motor

Skylarc Ref S175608

Industrial Vibration Motor.
Unknown manufactuer and model.
Motor is approx 150mm long, 70mm diameter.
Mounted on a 160x150mm steel plate.
Single phase 10A plug attached.
The unit operates normally, see video.

2 x Welding Screens

Skylarc Ref O177996

2 x Welding Screens
Each screen is 1800mm x 1800mm
Both screens are each missing a castor.
Some holes in s reen material.

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref Z175589

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Assorted Welding Hoses, Cables, Torches, Regulators

Skylarc Ref I175988

Assorted Welding Hoses, Cables, Torches, Regulators.
Condition varies with each item.
See photos for included items.

Lathe Boring Head Shank Bar, 50mm Dia

Skylarc Ref S175972

Lathe Boring Head Shank Bar.
50mm Diameter, 275mm length.
Probably a Sandvik Coromant unit but cannot verify as ID markings are worn off.
See photos for mounting head design.

Assorted pipe fittings

Skylarc Ref H177391

Various pipe fittings

3 Crab Clamps

Skylarc Ref S177532

Approx 110mm capacity

WEG Vector Frequency inverter CFW500

Skylarc Ref H175987

WEG Vector Frequency inverter.
Brand WEG.
Model CFW500B06P5T4DB20C2.
Type CFW500 vector inverter.
Input line voltage rating 380 to 480 VAC.
Input frequency rating 50 or 60 Hz.
Input current rating 7.9 A three phase.
Output frequency range 0 to 500 Hz.
Label indicates UL and CE markings.
Made in Brazil.
Front control panel with LCD display and keypad
Includes user manuals, CD-ROM, attachments.

Electrical Cabinet and contents

Skylarc Ref H177365

Cabinet door not attached

FAG SNG 515-612 Plummer Block Housing

Skylarc Ref F177519

Brand FAG
Model SNG 515-612
Type plummer block housing
Material cast metal housing
Two piece split housing with top cover and base
Four mounting bolt holes in base
End covers installed on both sides
Bearing insert not included
Original box present with Plummer Blocks branding

Heavy Duty Workshop Bench

Skylarc Ref E177960

Steel legs and frame
Plywood drawers

Industrial Ram

Skylarc Ref S177376

Condition unknown

SMC Pneumatics CDA2G100-200Z cylinder

Skylarc Ref D177309

Brand SMC Pneumatics
Model CDA2G100-200Z
Job number 107830
Cylinder marking CYL100X200 D A MAG
Maximum pressure 0.99MPa 145PSI
Tie rod pneumatic cylinder construction
Front end threaded piston rod
Cylinder barrel appears metallic
End caps with four mounting holes
Port connections on both end caps
SMC logo on end cap

3M 6800 Series Reusable Full Face Mask

Skylarc Ref O176306

3M 6800 Series Reusable Full Face Mask.
Soft, elastomeric facepiece for wearer comfort.
Four-strap suspension means the mask is easy to put on and take off.
Large polycarbonate lens offers good visibility and meets the performance requirements of AS/NZS 1337.1.
3M™ Cool Flow™ Exhalation Valve helps reduce heat and moisture build-up and provides easy exhalation.
When used with the correct 3M bayonet-style filter or cartridges, protects against a broad range of gases, vapors and/or particulate hazards.
Compatible with 3M™ 2000, 5000, 6000 and Series filters to suit individual needs.
Can be used with 3M™ Powered and Supplied Air Systems including TR-600, TR-800 and V-300 + V-399+ for increased convenience and flexibility.
Includes a pair of unsealed No.6051 filters.
Filters and Mask and box dusty from open box storage. Box shows storage wear.

https://www.3mnz.co.nz/3M/en_NZ/p/d/b00039038/

2 Heavy Duty Steel adjustable stands on wheels

Skylarc Ref A177358

Two steel adjustable stands.
Each stand is mounted on four fixed steel wheels.

Height adjustment and wheels heavily rusted a may be hard to free up.

Lasermark LLD-20 Laser Line Detector

Skylarc Ref Q177998

Brand: Lasermark
Model: LLD-20
Type: Laser line detector
Front panel power button
Front panel beam adjustment buttons
Front panel volume button
Front display window with level indicators
Rear display window with level indicators
Rear marking shows 50 mm offset
Rear threaded mounting insert
Battery compartment for 9V battery
Label text: Lasermark LLD-20 Detector
Manufacturer: CST/berger WATSEKA IL 60970
Made in USA

No battery included

Bulk 26kg Bag of Tapioca Maltodextrin Powder

Skylarc Ref J175599

Bulk 26kg Bag of Tapioca Maltodextrin Powder.
Manufactured 09/2023.
Expiry/retest date 09/2025.

Pallet of 225+ Carboard Pallet Corner Protector Sheets

Skylarc Ref K176302

Pallet of Carboard Pallet Corner Protector Sheets.
Over 225+ 1000x300mm folding carboard Corner Protector Sheets on pallet.
As new leftover factory supply stock.

Stauff 10Um Inorganic Glass Fibre Filter Element SE-030

Skylarc Ref Q175996

Stauff 10Um Inorganic Glass Fibre Filter Element.
Part No. SE-030-H-10B/4 (1020023492).
Made in Germany.
10 Um micron rating.
150mm long, 45mm diameter.
Filter is new in factory sealed bag. NOTE that its box shows much wear from factory spare parts room storage.
See manufacturer website below for further item specs:
https://stauff.co.nz/en/products/1020023492#technical-data

3x Wall Mounted Steel Parts Storage Bin Racks

Skylarc Ref L175965

3x Wall Mounted Steel Parts Storage Bin Racks.
Each rack is made from 3mm welded steel with gloss white finish
Each rack is 870x60x100mm.
Each is from 8 to 72, see photos.
Each storage bin is 75x55mm and 40mm deep.
Needs bolts to mount on a wall.
Oily and dirty surfaces from Workshop usage.
See our other listing for another identical set.

Sykes Pickavant No 022600 tool

Skylarc Ref E177388

Brand Sykes Pickavant
Model No 022600
Made in England

Castrol Magna SW D 220 Slideway Oil 20L

Skylarc Ref P177399

Brand: Castrol
Product: Magna SW D 220
Type: Slideway oil
Formerly known as Magnaglide D 220
Volume: 20 L
Item number: 3410650
Retest date: 27/03/2023
Batch number: M9D22923063RM
Drum number: 19 of 41
Manufactured in Australia

VERY CLOSE TO FULL BUT HAS PREVIOUSLY BEEN OPENED SO IT IS STRONGLY ADVISED THAT THE CONTENTS IS INSPECTED BEFORE USE

3 Sheets of MDF like board

Skylarc Ref P177321

Each approx 2680mm x 900 x 20mm

Heavy duty adjustable clamp tool

Skylarc Ref B177307

Heavy duty adjustable clamp tool
Black metal body
Central clamping block with opposing V shaped jaws
Handles have knurled grip sections with threaded ends for attachment
Main body has internal threaded section

Assorted Small Parts Containers and Some Contents

Skylarc Ref A177540

See Photos

Punch Kit

Skylarc Ref K177394

Punch kit

Pneumatic Parts Washer

Skylarc Ref N177995

Parts washer tub is 730mm x 500mm x 275mm

Assorted Treadplate offcuts

Skylarc Ref V177353

Some pieces aluminium some steel
Largest sheet approx 1750mm x 1200mm

Hypertherm Powermax 45 Consumables

Skylarc Ref N177501

See photos

Pallet of Assirted IT Accessories, Peripherals, & More

Skylarc Ref H175961

Pallet of Assirted IT Accessories, Peripherals, & More.
Newtwork cables, various power supply cables, USB keyboards, PC speakers, Newtowrk switches or similar, Faulty Viewsonic digital projector (no fan or light function), and other IT and computer related items on 1600x1050mm pallet.

3-Phase Ventilation Filter Assembly

Skylarc Ref H175805

3-Phase Ventilation Filter Assembly.
Unknown manufacturer and model.
Two 3-phase cords attached, one with a 5-pin 500V, 32A plug and the other with a 7-pin 500V, 20A plug.
Very dirty surfaces, needs a major cleanup.

3M 6000 Series Reusable Full Face Mask

Skylarc Ref V176313

3M 6000 Series Reusable Full Face Mask.
Soft, elastomeric facepiece for wearer comfort.
Four-strap suspension means the mask is easy to put on and take off.
Large polycarbonate lens offers good visibility and meets the performance requirements of AS/NZS 1337.1.
3M™ Cool Flow™ Exhalation Valve helps reduce heat and moisture build-up and provides easy exhalation.
When used with the correct 3M bayonet-style filter or cartridges, protects against a broad range of gases, vapors and/or particulate hazards.
Compatible with 3M™ 2000, 5000, 6000 and Series filters to suit individual needs.
Can be used with 3M™ Powered and Supplied Air Systems including TR-600, TR-800 and V-300 + V-399+ for increased convenience and flexibility.
Includes a pair of unsealed No.6059 filters.
Mask appears unused but cannot verify. Filters and Mask dusty from open box storage.
Mask is size Medium.
https://www.3mnz.co.nz/3M/en_NZ/p/d/b00039038/

Large Rolling Storage Box and assorted contents

Skylarc Ref B177385

MDF box on caster containing various treasure.

3x Wall Mounted Steel Parts Storage Bin Racks

Skylarc Ref K175964

3x Wall Mounted Steel Parts Storage Bin Racks.
Each rack is made from 3mm welded steel with gloss white finish
Each rack is 870x60x100mm.
Each is from 8 to 72, see photos.
Each storage bin is 75x55mm and 40mm deep.
Needs bolts to mount on a wall.
Oily and dirty surfaces from Workshop usage.
See our other listing for another identical set.

Shipping Strapping Clips & Buckles w/ Crimping Tool

Skylarc Ref P176307

Shipping Strapping Clips & Buckles w/ Crimping Tool.
Tool made in Switzerland.
Tool is 425mm long.
Full 27x27x110mm box of 32x15mm metal crimping clips.
Partial 240x210x140mm box of 28x25mm by 3mm strpping Buckles.
Clips and Buckles are as new unused. Tool shows use.

Assorted Welding Accessories, Supplies

Skylarc Ref U175818

Assorted Welding Accessories, Supplies.
Includes:
2x Lengths of gas hose.
1x Inert gas and 1x Oxygen gas regulators.
2x Tweco Mig-gun Optimum wire conduit.
Bundle of 305mm long, 10mm diameter gouging carbon Electrodes.
1x Kemppi 3-metre Teflon wire liner Part No 4300840.
3x Mig Arc steel wire liner Part No.303955.
2x Mig Arc steel wire liner Part No.303956.

Condition varies with each item. Some are as new unused in dirty packaging while the hoses and regulators show moderate usage and wear

Steel Wheelbarrow w/ Shovel

Skylarc Ref D175801

Steel Wheelbarrow w/ Shovel.
400mm pneumatic tyre in very good condition.
Steel tub.
Concrete residue in wheelbarrow and on Shovel.

LectroEtch Electrochemical Marking Power Unit V10A

Skylarc Ref N175967

LectroEtch Electrochemical Marking Power Unit.
Model No.V10A.
Includes user manual, probes, and original box.
Item is as new unused.
NOTE that this unit has a 120V, 60Hz input! It's non-NZ compliant plug has been removed for safety. Buyer assumes risk in adding NZ plug and getting a separate step down transformer unit to run this item with.
See our other listing for a second identical new unit.

Assorted Spraygun Parts

Skylarc Ref P177373

Various spraygun parts
Devilbiss sbd others
All untested and may not be complete

FAG SNG 511-609 Plummer Block Housing

Skylarc Ref X177511

Brand FAG
Model SNG 511-609
Type plummer block housing
Material cast metal housing
Two piece split housing with top cover and base
Four mounting bolt holes in base
End covers installed on both sides
Bearing insert not included
Original box present with Plummer Blocks branding

3 WeldStar Welding Magnets 100mm W-WM5

Skylarc Ref J177523

Brand: WeldStar
Product: Welding Magnet
Model: W-WM5
Size: 100mm
One loose magnet
Two magnets in retail packaging
Body colour: orange
Outer casing material appears to be metal
Central circular cut-out in each magnet
Approximate working angles marked on packaging: 45 degrees and 135

Steel hand trolley with pneumatic tyres

Skylarc Ref P175839

Steel frame hand trolley
Two wheel configuration
Steel footplate with upturned sides
Upper steel tray welded between uprights
Curved tubular steel handles
Pneumatic tyres

Visible surface rust on frame and tray

LectroEtch Electrochemical Marking Power Unit V10A

Skylarc Ref O175968

LectroEtch Electrochemical Marking Power Unit.
Model No.V10A.
Includes user manual, probes, and originsl box.
Item is as new unused.
NOTE that this unit has a 120V, 60Hz input! It's non-NZ compliant plug has been removed for safety. Buyer assumes risk in adding NZ plug and getting a separate step down transformer unit to run this item with.
See our other listing for a second identical new unit.

Aluminum Pallet

Skylarc Ref Z177357

Aluminum pallet

Small Industrial Roller Conveyor

Skylarc Ref E175802

Small Industrial Roller Conveyor.
340mm long, 50mm diameter plastic rollers.
Non-adjustable steel frame

2x Gen.2 HRV Air Filters, 300x295x95mm, New

Skylarc Ref N175603

2x Gen.2 HRV Air Filters.
Both filter class ePM10 80%.
F8 filters.
Both are 300x295x95mm.
Both new unused, briefly removed from sealed boxes for photis only.

10x Assorted Procimity Sensors

Skylarc Ref P175995

10x Assorted Procimity Sensors.

Includes 8x Honeywell branded sensors Model 976AA4H1-A3T-LF7-H.
Input 18 to 30 VDC.
Output 5 to 100 mA.
Made in USA.
Cylindrical threaded metal housings 80mm ling, 28mm diameter.

The remaining two sensors are of the same diameter and lengths as sbove units but slightly different thread position and housing design and with illedgible ID markings.

4 Racking Beams

Skylarc Ref I177340

2740mm long

3.2m Timber Plank

Skylarc Ref H177313

Type of Timber unknown

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref D175593

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

CIGWELD Comet 500 Argon Inert Gas Regulator

Skylarc Ref O177528

Brand CIGWELD.
Model Comet 500.
Gas type Argon.
Marked for inert gases N Ar He.
Dual gauge regulator.
High pressure gauge scale 0 to 30000 kPa.
Low pressure flow gauge scale 0 to 55 LPM.
Low pressure gauge marked MIG and TIG ranges.
Maximum inlet pressure marked 23000 kPa at 15 C.

10-Metre 15A 250V Single Phase Power Lead Cable

Skylarc Ref L175991

10-Metre 15A 250V Single Phase Power Lead Cable.

304 Grade Stainless Steel Pipe, 6-metres x 63.5mm dia

Skylarc Ref S175946

304 Grade Stainless Steel Pipe.
6-metres long, 63.5mm diameter, 1.6mm wall thickness.
As new unused stock.

Fuji Electric Frenic 5000G9S

Skylarc Ref F176063

Manufacturer Fuji Electric Co Ltd
Model Frenic 5000G9S
Type FRN5.5G9S-2
Three phase input
Input source voltage 200 to 230V
Input frequency 50 or 60Hz
Output power rating 9.5kVA
Output current rating 25A
Output frequency range 0.2 to 400Hz
Front keypad with display and control buttons
Made in Japan

Assorted Small Parts Containers and Some Contents

Skylarc Ref Z177539

See Photos

Grinding Stones

Skylarc Ref T177507

Assorted types
Largest 170mm diameter

3.6m Fijian Kauri Timber Plank

Skylarc Ref I177314

Fijian Kauri

5m Surveying Staff

Skylarc Ref U177326

3 Section

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref G175596

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Rockwell RG8090 electric chain saw

Skylarc Ref B177333

Brand: Rockwell
Model: RG8090
Type: Chain saw
Power source: 220-240V AC 50/60Hz
Power rating: 2200W
Chain bar length: 45cm
Chain bar marked LOW KICKBACK
Electric corded design

5-Metre 15A 250V Single Phase Power Lead Cable

Skylarc Ref M175992

5-Metre 15A 250V Single Phase Power Lead Cable.

Pallet of Sandvick Coromant Capto Tooling Holder Racks

Skylarc Ref M175966

Pallet of Sandvick Coromant Capto Tooling Holder Racks.
10x Tooling racks each 565x140x150mm with mounting brackets.
Removable red plastic Tooling inserts include holes for Sandvik Coromant Capto C4 and C5 Tooling as well as circular 65mm diameter holders with Lista branding.
Items are oily from Workshop usage

3-Phase 16A 8-Metre Power Extension Cable Lead w/ Type 303-TLS Plugs

Skylarc Ref Q175606

3-Phase 16A 8-Metre Power Extension Cable Lead.
5-pin Male and female Type 303-TLS Plugs.

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref H175597

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Bench press tool

Skylarc Ref U177508

Cast metal frame
Threaded vertical screw with metal handle bar
Metal ram attached to lower end of screw
Circular pressing face on ram
Base plate with single mounting hole
Manual screw operation

15x Mill Clamps w/ Bolts

Skylarc Ref P175969

15x Mill Clamps w/ Bolts.
Each is 68mm long, 34mm wide, 45mm tall.
Mounting Shanks are 26mm diameter with 18mm inner bore.
Includes M12 mounting bolts plus M12 hex key tool.

Logger Chainsaw Chaps

Skylarc Ref N177371

Medium

4m Timber Plank

Skylarc Ref J177315

Type of Timber unknown

Record 414 Drill Press Vice

Skylarc Ref A177306

4 inch

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref C175592

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref B175591

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Electrical Cabinet & Contents

Skylarc Ref G177390

See photos

Makita Empty Power Tool Case

Skylarc Ref L175601

Makita Empty Power Tool Case.
The case originally held the Makita Cordless Combo Kit DLX2131X.
All original case contents are NOT included!
Auction is for the empty case in excellent and very clean condition
Case measures 495x360x140mm.

EMICO OTLS Limit Switch Box units

Skylarc Ref W177510

Brand EMICO
Product Limit Switch Box
Model OTLS
Manufacturer Eunha Machinery Industrial Co Ltd
Type inductive proximity sensor
Enclosure rating IP67 NEMA 4X
Power supply 12 to 24 VDC
Operating voltage 10 to 30 VDC
Three EMICO OTLS limit switch box units included
One additional tower indicator light module included

Welding Helmets

Skylarc Ref U177378

Both untested.

No power cable for black one and missing strap side connector.

304 Grade Stainless Steel Piping, 3x 6-metre x 12.7mm dia lengths

Skylarc Ref X175951

304 Grade Stainless Steel Piping.
3x 6-metre x 12.7mm outer diameter lengths in auction.
Wall thickness 1.6mm.
Made in Taiwan.
As new unused stock.

Ridgid Heavy Duty E24 Pipe Wrench

Skylarc Ref P177503

Brand Ridgid.
Model E24.
Marked Heavy Duty.
Adjustable pipe wrench.
Knurled adjustment nut.
Serrated jaws.
Metal construction.
Visible surface rust on body and jaws.

Hydraulic valve assemblies with hoses and levers

Skylarc Ref M177370

Two hydraulic valve assemblies

Heavy Steel Custom Toolbox w/ Drawer

Skylarc Ref B175981

Heavy Steel Custom Toolbox w/ Drawer.
Custom made from 6mm stainless plate steel. Stainless grade unknown.
Non-stainless hinges and padlock latch which are rusty.
Toolbox dimensions, excluding side handles, is 500x300x320mm.
Bottom of unit has an external drawer 40mm deep.
Very dirty surfaces, would benefit from a good cleanup.
Very sturdy heavy duty Toolbox.

Milwaukee M12 Battery electric grease gun

Skylarc Ref R177999

Brand Milwaukee
M12

Model plate information missing.
No battery

65mm Dry Core Drill Bit

Skylarc Ref R175607

65mm Dry Core Drill Bit.
Unknown manufacturer.
150mm cutting depth.
10mm Hex type mounting shank.
225mm total length.
Shows mild usage.

Assorted Taps

Skylarc Ref R177505

See photos

Large Rolling Storage Box and assorted contents

Skylarc Ref D177387

MDF box on caster containing various treasure.

3 Sackbarrows

Skylarc Ref A177332

Pneumatic tyres

100mm Machine Vice

Skylarc Ref Z177305

100mm wide jaw

Recoil Thread Repair Kit M16-2 Part No 35160

Skylarc Ref R177531

Brand Recoil
Thread repair kit
Size M16-2
Part number 35160

Partial Reels of Welding Wire

Skylarc Ref O177502

See photos for labels

Small bench screw press

Skylarc Ref M177396

Small manual screw press.
Cast metal C frame body.
Round base plate with two mounting holes.
Vertical screw spindle with external thread.
T bar handle across top of spindle.
Lower fixed metal anvil on base.
Pressing area between spindle tip and lower anvil.
Visible surface rust on base and frame.

304 Grade Stainless Steel Pipe, 6-Metre x 38mm dia

Skylarc Ref V175949

304 Grade Stainless Steel Pipe.
6-Metre length, 38mm diameter 1.5mm thick side wall.
New unused stock.

Record Power bench vice - PV3

Skylarc Ref H177521

Brand: Record Power
Marking: Sheffield England
Bench vice with square fixed base
Blue painted cast metal body
Leadscrew operated sliding jaw
Square section jaws

Small Parts Storage Drawers

Skylarc Ref P177347

Drawers approx 105mm x 50mm x 35mm

Assorted Stainless Steel Pipe Fittings

Skylarc Ref W177380

Various Types

Uni-Flame Single-Stage Argon Regulator

Skylarc Ref U177534

Brand Uni-Flame
Single-stage regulator
Gas type argon
Flow range 0-32 litres per minute
Max inlet pressure 20000 kPa at 15°C
Dual gauge design

Punch Set

Skylarc Ref L177395

punch set

2 Rolls Plain Shrink Film

Skylarc Ref V177379

Both rolls are belived to be the same type.
1 partial roll
See label for type

Steel frame stand

Skylarc Ref Y177356

Steel frame stand.
Rectangular open top frame.

Vintage HHP Branded Fastening Hardware Packets

Skylarc Ref D175983

Vintage HHP Branded Fastening Hardware Packets.
See photos for details on types of hardware in packets.
Includes vintage 170x140x80mm metal storage box. Some rust on box surfaces.
Hardware packets show fading and dust from age.

Controlco 4 Drum Spill Pallet, 250L, Damaged

Skylarc Ref K175600

Brand Controlco.
4 drum spill pallet.
Part number 01-1021.
Sump size 250 L.
Load rating 2700 kg.
Material marked PE plastic.
Removable perforated deck panels.
Integrated sump under deck.
Black plastic construction.
Note that there is a crack in the plastic at one of the bottom support feet, see photo, this will need re-sealing to prevent leakage.

Part Rolls of Welding Wire

Skylarc Ref X177537

See photos for labels- if any.

SEW EURODRIVE geared motor assembly

Skylarc Ref T176311

Manufacturer SEW EURODRIVE
Model WHF37 CMP50S/KY/RH1M/SM1
Motor rated torque 1.30 Nm
Motor speed range 0 to 3000 rpm
System voltage 400 V
Motor current I0 0.96 A
Motor current Imax 5.10 A
Motor type permanent magnet
Protection rating IP65
Insulation class F
Gear unit torque Ma pk 108 Nm
Gear unit torque na pk 194.00 Nm
Gear unit speed ne pk 4500 rpm
Gear ratio i 23.25
Motor mass 8.000 kg
Inverter duty motor only
Gear unit oil type CLP PG 460 NSF H1 food oil.
Oil quantity 0.501 L
Assembly includes stainless steel mounting plate 380mm long and stainless steel 250mm long shaft with green plastic coupling.
Made in Germany.

Safety Harness Components

Skylarc Ref S177350

See photos for any visible labels

Electrical Cabinet and Contents

Skylarc Ref C177360

All untested

EC-Siren White External Siren/Strobe 10 to 15VDC

Skylarc Ref T175999

EC-Siren White External Siren/Strobe.
10 to 15VDC, 250mA max.
250x150x40mm.
As new unused. Box shows storage wear, dust.

https://lightingelectricalsupplies.co.nz/index.php?route=product/product&product_id=1252&srsltid=AfmBOopQndMaJkKVf35_I-_iwM7nxtvTqia28p9cTRDD3xfMLsFiNAcG

Duratech TD2451 Mini Hand Drill Grinder Set

Skylarc Ref M177318

Brand: Duratech
Model: TD2451
Mini hand drill and grinder
110 piece set
Electric powered tool

Various Monitor Stand Components

Skylarc Ref L177317

Various parts for random computer monitor desk stand attachments

Nobel Elektronik SBS-21B Industrial Electrical Units

Skylarc Ref F175959

Manufacturer Nobel Elektronik
Both are Model SBS-21B
Art no 1 168 723
Unit 1 serial no 0017
Unit 2 serial no 0018
Made in Sweden
Two SBS-21B units mounted in a shared aluminium frame.
Each unit has a front rotary control with scale dial.
Each unit contains multiple plug-in circuit boards.
Visible supply module marked +15VDC -15VDC 0.4A5 +30VDC -30VDC GND.
Each unit has D-sub connectors on the rear panel.
Rear connectors appear to be two 15-pin D-sub per unit.
No accessories or documentation.

2x MAC3 Key Cable Float Switches, New

Skylarc Ref K175990

2x MAC3 Key Cable Float Switches.
Both are modrl 02T.
550mm cable length.
13A 250V Single Phase.
IP68.
Both are as new unused.

Value Wafer Check Valve CV-122B

Skylarc Ref R175997

Value Wafer Check Valve.
Model CV-122B.
Cast iron body 255mm diameter, 65mm long.
Bronze plate 110mm diameter.
Stainless steel stem.
RPDM material seat.
Valve appears as new unused.

Bearing housings

Skylarc Ref F177337

Model marking SNL 518-615 on two housings
FSO split bearing housings
Model marking SSN 520 on two housings
Total of four housings shown
All housings are pedestal mount type
Each housing has two base bolt holes on each side
Housings appear to be empty with no bearings installed
Cast markings SKF on two housings
Cast markings FSO on two housings
Material appears to be cast metal
Colour of two housings is dark
Colour of two housings is grey
Items shown resting on a wooden sheet

Assorted Items

Skylarc Ref D177335

Nets, Pump, Nails, Sprayers, TV wall mounting and more.

BOC 6000 Argon Inert Gas Regulator

Skylarc Ref T177533

BOC 6000 argon regulator.
Inert gas service.
Front label states Argon 200 kPa.
Gauge marked kPa inert.
Gauge range 0 to 22000 kPa.

Fishing tackle box with contents

Skylarc Ref K177342

Plastic tackle box with folding tray and compartments
Lead sinkers in various sizes including 2oz 3oz 8oz and 16oz
Multiple plastic bags containing pre-rigged traces
Some bags labelled Groper Trace
One Maritec fixed blade knife with serrated edge and yellow black handle
Yellow plastic knife sheath

Box catch broken

Small machine vice 2.5 inch

Skylarc Ref I177522

Small machine vice
Metal construction
Fixed and movable jaws
Screw operated with handle

Rubber Waders

Skylarc Ref D177361

Size 46 boot
No Size visas on leg part

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref I175598

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Cigweld Comet 500 Argon Regulator with Flowmeter

Skylarc Ref N177527

Brand: Cigweld
Model: Comet 500
Gas type marking: Argon
Outlet pressure marking: 200 kPa
Body marking: HP inert gas N Ar He
Gauge face range: 0 to 30000 kPa
Max inlet pressure marking: 23000 kPa 230

Dymo LabelWriter 460 Label Printer

Skylarc Ref I175962

Dymo LabelWriter 460 Label Printer.
Model No.1750111.
Printed a test print showing no visible errors in graphic, see photos.
Inxludes power cord.

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref F175595

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Steel Storage Box

Skylarc Ref D177543

Galvanised steel

Pinch Kit

Skylarc Ref J177393

Punch kit

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges, 6x Units, New

Skylarc Ref D175827

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges.
6x new factory plastic wrap sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

304 Grade Box Stainless Steel Length, 6-metres x 25x25mm

Skylarc Ref T175947

304 Grade Box Stainless Steel Length.
6-metres long, 25x25mm square, 3mm wall thickness.
As new unused stock.

2 Steel Beams

Skylarc Ref G177364

Original purpose unknown

AL-KO JET 3500-M water pump

Skylarc Ref G176064

Brand: AL-KO
Model: JET 3500-M
Article number: 112839-M
Serial number: G3012015
Year of manufacture: 2013
Power supply: 230V
Frequency: 50Hz
Power rating: 850W
Maximum head (Hmax): 38m
Maximum flow rate (Qmax): 3.4m3/h
Maximum suction head (SHmax): 8m
Ingress protection rating: IPX4
Maximum liquid temperature: 35°C
Sound power level: 77 dB
Manufacturer: AL-KO Geräte GmbH 89359 Kötz Germany
Three-pin mains plug fitted

Comes as photographed

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges, 5x Units, New

Skylarc Ref H175831

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges.
5x new factory sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

El-O-Matic ED0100 Pneumatic Actuator

Skylarc Ref K175808

Brand El-O-Matic
Model ED0100.
Type ED0100.MHA00A..19K0.
Serial number 195592064/08.
Pneumatic actuator.
Maximum pressure 8 bar.
Maximum pressure 116 psi.
Temperature class T120°C.
Maximum temperature 80°C.
Minimum ambient temperature minus 20°C.
Marking II 2 GD c T120°C.
PED Group 2.
Manufactured by Emerson.
Made in Netherlands.

Steel gas cylinder trolley

Skylarc Ref N175837

Steel gas cylinder trolley
Two wheel design
Steel base plate
Steel ring support for cylinder
Vertical support frame with handle grips
Chain fitted to secure cylinder

Steel lifting beam and bracket set

Skylarc Ref M175836

Steel lifting beam marked 900 on one side - 1160mm long
Two chains attached to the lifting beam with eye bolts
Triangular steel frame with red painted inner sections
Two lifting eyes on the triangular frame
One rectangular steel bar with mounting holes at each end
Two short steel plates each with a circular hole at one end
Two right angle steel brackets with slotted holes and circular keyhole slots
Two short hex head bolts with nuts
All parts shown in the photos - unknown ic complete.

Mobile Multifunction Table - New in Box

Skylarc Ref S177324

600mm diameter top
Adjustable height
Assembly required

Manual gate valve

Skylarc Ref K175834

Manual gate valve approx 210mm diameter opening
Handwheel operated
Blue circular handwheel marked OPEN and SHUT
Handwheel also marked 315
Rising threaded stem
Valve body with flanged ends
Eight bolt holes visible on each flange face
Valve body appears to be metallic construction
Linear gate closes across circular bore
Top plate held with four hex head bolts
Two parallel guide rods support the gate

Lantronix UDS1100 and JTILNet LT-180708478 in enclosure

Skylarc Ref E177518

Lantronix UDS1100 Universal Device Server
Lantronix UDS1100 supports serial RS232 RS422 RS485 interface
JTILNet unit marked LT 180708478
JTILNet unit label shows PN 264-08G REV A1H MFG DATE 01 10 2008
Enclosure contains Omron 24V DC component
Enclosure contains two Optifuse SC23 32A Safe Clip fuse holders
Internal wiring includes labelled L and N terminals and DC output marked plus DC minus DC NC
Plastic enclosure with hinged lid and latch
External mounting bracket attached to enclosure base
Multiple internal terminal blocks for wiring connections
Ethernet cable present inside enclosure
Serial cable attached to Lantronix UDS1100

Siemens Servo Motor with SEW-Eurodrive KHF37 Gearbox

Skylarc Ref U176312

Siemens servo motor and SEW-Eurodrive gearbox assembly.

Siemens motor details:
Type 1FK7042-5AF71-1SA5.
Number YF S428 3268 01 001.
Torque Mo 3.0 Nm.
Torque MN 2.6 Nm.
Current Io 2.2 A.
Current IN 1.95 A
Speed nmax 9000 1min
Speed nN 3000 1min
Voltage Uin 267 V
Protection rating IP65.
Resolver poles p=4
Made in Germany.

SEW-Eurodrive Gearbox details:
Type KHF37 AQ1003
Number 24 04823 2004 01
Ratio 15.31 1
Oil type Mobilgear 630.
Hollow Gearbox output shaft 25mm long, 38mm outer dia, 30mm inner dia.
Mounting flange 160mm dia.

510mm total assembly length.
23.6kg total weight.

Assorted Taps

Skylarc Ref S177506

See photos

Industrial temperature probes lot

Skylarc Ref N177397

Lot of industrial temperature probes
Several probes have aluminium connection heads
Some probes have white connection heads
Some probes have grey connection heads
Some probes have attached black cables
Probes have metal stems
Quantity as shown in photos
Operational status not tested

Macnaught C16 Suction Gun

Skylarc Ref Q177400

Brand: Macnaught
Model: C16 Suction Gun
Suction gun capacity: 500 ml
Rated for fluids up to SAE 90
Includes flexible hose attached to nozzle
Metal pull handle at rear
Body colour: blue
Label text: Macnaught Pty Ltd Australia

Sand paper

Skylarc Ref R177349

See photos

Pair of mechanical float valves

Skylarc Ref F177363

Two mechanical float valve units

AS Schwabe MIXO MAIN 60530 CEE Adapter

Skylarc Ref P175605

AS Schwabe MIXO MAIN 60530 CEE Adapter.
400V, 16A, max 11kW.
250mm total item length.

https://as-schwabe.de/produkt/mixo-main-16-a-ca-11-kw/

Super Works 12V DC Electric Winch

Skylarc Ref K177524

Brand Super Works
Type 12V DC electric winch
Power supply 12V DC
Maximum capacity 680kg single line

Winch drum and mounting plate not included

Bosch Heatgun

Skylarc Ref B177541

Adjustable temperature
Unknown model

Assorted items

Skylarc Ref Z177513

See photos

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges, 5x Units, New

Skylarc Ref I175832

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges.
5x new factory sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

Steel cylinder trolley

Skylarc Ref O175838

Steel frame trolley
Two vertical tubular steel handles
Fixed upper steel support bracket with semi circular cut out
Two vertical steel retaining lugs on upper bracket
Steel foot plate with curved front edge
Two solid wheels

Assorted Tools

Skylarc Ref P177529

See photos

Assorted Industrial Hoses

Skylarc Ref Z177383

Various types

Foil Bags

Skylarc Ref J177367

Approx 250+ foil bags
Exact purpose unknown
Each approx 500mm x 400mm

Industrial Filter Assembly

Skylarc Ref G175804

Industrial Filter Assembly.
Unknown manufacturer and model.
Steel construction with white enamel finish.
Dirty surfaces, needs a heavy cleanup.

Assorted Sprays

Skylarc Ref Y177538

Grease, Electra Clean, Lube

Appear to be approx 50% full or more.

Inert Gas Regulator with Dual Gauges

Skylarc Ref M177526

Inert gas pressure regulator
Two pressure gauges fitted
Gauges marked kPa INERT
Left gauge marked LPM INERT
Left gauge scale 0 to 50 LPM
Right gauge scale 0 to 30000 kPa
Gauges labeled USE NO OIL
Body material appears to be brass
Blue plastic adjustment knob on regulator
Rear label states CAUTION INERT GAS
Rear label specifies MAX INLET 20000 kPa at 15C

2 Trojan 4 Inch Clamps

Skylarc Ref C177516

Approx 4 inch capacity

Honeywell Turboshield Face Headgear Assembly

Skylarc Ref W176314

Honeywell Turboshield Face Protection System Headgear Assembly.
Part No.1031740.
New unopened in packaging.
https://automation.honeywell.com/au/en/products/personal-protective-equipment/face-protection/face-shields/honeywell-turboshield

Workshop Shelving

Skylarc Ref A177384

Steel frame
MDF Shelves

Karcher Water Blaster Spray wand

Skylarc Ref T177377

Approx 1160mm long

Hopper

Skylarc Ref L177369

Did nothing when plugged in.

Yellow steel lifting tool

Skylarc Ref T177325

Yellow painted steel post.
Two pronged flat steel base.

VDI 40 Tooling Holders, 10x Assorted Units

Skylarc Ref N175811

VDI 40 Tooling Holders.
All have 40mm diameter, 62mm long mounting shanks.
5x 110mm diamter Tooling heads and 5x 100mm diameter heads.
See photos for further details on Tooling types.

ST2000 Smart Transmitter

Skylarc Ref Q177374

ST2000 Smart Transmitter
Model STDC24-E1H-00000-CR-F1D5-5126
Factory calibration 0 to 100 in H2O
Terminal voltage 11 to 42 VDC
Output signal 4 to 20 mA DC
Body temperature limits minus 40°C to 105°C
Ambient temperature limits minus 40°C to 85°C
Wired cable connection present
Includes attached process connection assembly with bolted flange
Metal identification plate on body

Long Filter

Skylarc Ref I177366

Approx 2050mm long x 140mm diameter

Tientai TF-565 Flux for Submerged Arc Welding

Skylarc Ref T177351

Three 25kg bags

WHITE BAG HAS NO LABEL SO UNKNOWN IF SAME TYPE

Black and Decker Drill Press Stand

Skylarc Ref X177329

comes as shown

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges, 5x Units, New

Skylarc Ref G175830

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges.
5x new factory sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

Cintesi square white tables

Skylarc Ref C174708

Brand Cintesi tables
Quantity 2 tables
Square white tabletops
Single central column supports
Square white metal bases
Bases have rounded corners
Freestanding indoor tables

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref A175590

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Grease Guns and drum pump

Skylarc Ref X177381

See photos

Heavy Duty Industrial Steel Raised frame stand

Skylarc Ref B177359

Metal raised frame stand
Square frame construction
Four vertical metal legs
Each leg has a flat metal base plate with a single fixing hole

Roller Conveyor

Skylarc Ref J175833

2 Sections - Not attached to each other

4 Part Reels of Welding Wire

Skylarc Ref B177515

See photos for labels if present.

Assorted Tilling Related Tools

Skylarc Ref E177336

See photos

Fujifilm LTO Ultrium 4th Gen 800Gb Data Cartidges, 5x Units, New

Skylarc Ref F175829

Fujifilm LTO Ultrium 800Gb Data Cartidges.
5x new factory sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

Aegir-Safe Anti Fatigue Matting Modular Edging Components

Skylarc Ref Z175953

Aegir-Safe Anti Fatigue Matting Modular Edging Components.
Each Modular piece is 300mm long, 55mm wide, and up to13mm thick (dimensions exclude the locking triangles).
Approx 95x as new unused units in auction.

Precision 3-Drawer File Cabinet

Skylarc Ref T175609

Precision 3-Drawer File Cabinet.
Dark blue finish.
Lockable, key is missing.
Some finish scratches and a few dents.

7x Atlas Filtri FA 10 SX 50 mcr Sediment Cartridges

Skylarc Ref O175604

Brand: Atlas Filtri
7x Model: FA 10 SX 50 mcr Cartridges in auction.
Type: string wound polypropylene sediment cartridge
Material: polypropylene
Label text: sediment cartridge
Country of manufacture: Made in Italy.
Barcode on label: 8021647039132.
Code on label: RE5115414.

Vintage Brass Sprayer

Skylarc Ref C175982

Vintage Brass Sprayer.
Unknown brand/model and age.
Appears to be mostly brass construction.
Wooden handle.
260mm long 30mm diameter pump cylinder
450mm total tool length.
95mm dia by 95mm tall brass fluid tank.
Tarnished brass surfaces would benefit ftom a cleanup and restoration.

Talus Wheel Brush 200mm x 25mm

Skylarc Ref Q177348

28g gauge

2x Barcode Scanners by Honeywell & Numa

Skylarc Ref J175963

2x Barcode Scanners by Honeywell & Numa.
Includes Honeywell Orbit barcode scanner model MS7120. Manufactured June 2019. USB-A type connection plug
Includes Numa single line laser scanner model BL-2000. USB-A type plug.
Both tools power on and lasers operate, but scanning functions not tested.

Spill Kit

Skylarc Ref I177392

See photos

3 Barrels

Skylarc Ref R177375

Condition as photographed
Largest approx 920mm x 600mm diameter

HP LTO Ultrium Universal Cleaning Cartidges, 3x Units, New

Skylarc Ref X175821

HP LTO Ultrium Universal Cleaning Cartidges.
3x factory sealed new units in auction.
HP Part No.C7978A.

Machine Touch Screen Interface Panel w/ Stainless Steel Bezel

Skylarc Ref O175994

Industrial Machine Touch Screen Interface Panel w/ Stainless Steel Bezel.
No ID label on unit other than the number 390103.
Screen size 215x190mm.
Stainless steel front bezel 290x235mm.
Thickness 42mm.
Includes attached 9-wire cable, see photo for end connection type.
Screen itself in excellent condition though unable to power on to verify actual functionality. Stainless steel bezel shows some mild scratching.

Assorted items

Skylarc Ref Y177512

See photos

Nidec Shimpo Able Servo Motor Reducer VRKF-5B-200

Skylarc Ref U176000

Nidec Shimpo Able Servo Motor Reducer.
Model No VRKF-5B-200.
Made in Japan.
Ratio 1-5
104mm total length.
52x52mm cading size.
12mm diameter output shaft.
60x60mm input mounting flange
14mm input bore diameter.
Reducer in as new condition. Shaft and gearing turn smoothly.
See the manufacturer website below for further specs:
https://www.nidec-dtc.com/vrsf-b-frame/

Festo EMMS-AS-70-M-RS servo motor

Skylarc Ref S175998

Brand: Festo.
Model: EMMS-AS-70-M-RS.
Part number: 550118.
Rated torque Mn: 2.29 Nm.
Holding torque M0: 2.56 Nm.
Rated current Io: 2.96 A.
Maximum current Imax: 10 A.
Rated speed nn: 4100 rpm.
Rated voltage Un: 360 V.
Back EMF constant ke: 0.705 Vpk per rad per second.
Thermal class: INSUL 155.
Protection class: IP54.
Standards: IEC60034 and VDE-0530-S1.
Certification marks: cURus and CE.
Insulation class designation: I.C.L.F-100K
Ambient temperature range Tamb: -10°C to +40°C
Electrical connector with 8 pins on main plug
Secondary circular connector with 8 pins
Keyed output shaft 12mm dia.
Mounting face 70x70mm.
190mm casing length.

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges, 5x Units, New

Skylarc Ref E175828

IBM TotalStorage LTO Ultrium 800Gb Data Cartidges.
5x new factory plastic wrap sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

Gas cutting Torch

Skylarc Ref V177327

Metal gas torch assembly
Front end fitted with nozzle and end cap
Rear handle has knurled metal grip
Handle end has two threaded gas hose connectors

Two knurled control knobs on body

2x Workbench Top Shelving Storage Assemblies

Skylarc Ref A175954

2x Workbench Top Shelving Storage Assemblies.
Made from 13mm MDF painted in an off-white.
Larger unit is 2470x350x450mm.
Smaller unit is 1150x250x460mm.
Both would benefit from a surface cleanup.

Slotted Machine Blades

Skylarc Ref L177525

Each approx 220mm x 180mm x 7mm

Various Applicator Guns

Skylarc Ref Y177382

See photos

3x Assorted Vintage Drills

Skylarc Ref F175985

3x Assorted Vintage Drills.
Includes:
- Stanley drill made in England, model unknown, 420mm tool length.
- Fleetway Clipper drill, made in England, model unknown, wood handle, 300mm tool length.
- Unknown brand/model drill with plastic handle.

All drills show rusting, stuck or sticky gearing, rusted Chucks that need cleaning of rust to function. All would benefit from a reconditioning, restoration.

Assorted Heavy Duty Fuses, 500V, from 125A to 630A

Skylarc Ref N176305

Assorted Heavy Duty Fuses.
All appear to be unused stock but have been in stirage fot some time. Some are still sealed and clean in packaging, others have opened packaging, others are dusty from open storage.
Includes the following units:
- 3x Jean Miller gL-gG 315A, 500V Fuses.
- 3x Jean Miller gL-gG 80A, 500V Fuses.
- 1x Jean Miller gL-gG 630A, 500V Fuse.
- 2x Jean Miller gL-gG 125A, 500V Fuses.
- 2x Vynco gL 630A, 500V Fuses.
- 2x Vynco gL 250A, 500V Fuses.
- 3x MEM gL-gG 125A, 500V Fuses.
- 3x GEC Alsthom NHG 00 gL 150A, 500V Fuses.

See photos for further specs and type details.

Assorted Vintage Hand Tools

Skylarc Ref E175984

Assorted Vintage Hand Tools.
Pipe Threader.
Hand drill
Mallets.
Pipe cutter.
Hack saw.
Condition varies with each tool.

Metec Static Single Phase Watt Hour Meters, 2x Units

Skylarc Ref Q175814

Metec Static Single Phase Watt Hour Meters.
2x as new unused units in this auction.
Both are model No.DDS71.
230V
15(90)A
50Hz.
800imp/kWh.
Manufactured 2008.
Both include original boxes and user manuals.
Boxes show exterior dust from storage

Honeywell Internal Threaded End Connection Brass Linear Valve

Skylarc Ref G175986

Honeywell Internal Threaded End Connection Brass Linear Valve.
Part No.V5011S1062.
kvs 10
PN 16
DN 25
Part is as new unused but without packaging.

Allen-Bradley and Sprecher Contactors

Skylarc Ref Q176308

2x new Electrical Contactors.

Contactor No.1:
Allen-Bradley contactor model 100-C12VA10.
Allen-Bradley bulletin 100 series contactor.
Coil rated 230-240V 50Hz.
3 main poles and 1 N.O. auxiliary contact.
Complete device 100-C12VA10 series A.
Rated AC-1 690V 32A and AC-12 20A.
Made in Switzerland.

Contactor No.2:
Sprecher+Schuh contactor model CA7-12-10.
Coil rated 240V 50Hz and 277V 60Hz.
3 main poles and 1 N.O. auxiliary contact.
Rated AC-1 690V 32A and AC-12 20A.
CA7-12-10 series A.
Made in Switzerland.

Both contactors have UL and CE markings.
Each contactor is supplied with its original labelled cardboard box.
Both are as new unused. Boxes have exterior wear and dust from Workshop storage

Nutork NKD-092 Double Acting Pneumatic Actuator

Skylarc Ref G175960

Brand: Nutork
Model: NKD-092.
Type: Part Turn pneumatic actuator.
Action: Double acting.
Operating angle: 0° to 90°.
Operating temperature: -20°C to +80°C.
Serial number on label: NKD-092 2011 0174.
Marking: 94/9/EC.
Marking: CE.
Marking: Ex II2GDcX.

4 Part Reels of Welding Wire

Skylarc Ref V177509

See photos for labels if present.

Fujifilm LTO Ultrium 4th Gen 800Gb Data Cartidges, 5x Units, New

Skylarc Ref B175825

Fujifilm LTO Ultrium 800Gb Data Cartidges.
5x new factory plastic wrap sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

Old Step Down Transformer by Wooff & Salvesen, Christchurch

Skylarc Ref V175819

Vintage or Antique Step Down Transformer.
Made in Chrustchurch, New Zealand by Wooff & Salvesen, Electrical Engineers.
Manufactured dated not marked on unit.
Wood base board 260x90x20mm.
Colth covered wires.
Transformer approx 120x78x90mm.
Step down range from 240V to 110V.

Fujifilm LTO Ultrium 4th Gen 800Gb Data Cartidges, 5x Units, New

Skylarc Ref C175826

Fujifilm LTO Ultrium 800Gb Data Cartidges.
5x new factory plastic wrap sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

Keystone Material Hardness/Compressive Tester.

Skylarc Ref K177368

May not be complete

Stainless Steel Support

Skylarc Ref W177354

Lent against post for demonstration purpose.

Ryobi HJ60A 450W jigsaw

Skylarc Ref Z177331

Brand: Ryobi
Model: HJ60A
Mains powered jigsaw
Power rating 450W
Rated voltage 240V A.C.
Frequency 50Hz
No load speed 3000 RPM
Maximum cutting capacity 60mm

Includes blade

VDI 40 Tooling Holders, 7x Assorted Units

Skylarc Ref O175812

VDI 40 Tooling Holders.
7x Assorted types in auction, see photos.
40mm diameter, 62mm long mounting shanks.

Fujifilm LTO Ultrium 4th Gen 800Gb Data Cartidges, 5x Units, New

Skylarc Ref A175824

Fujifilm LTO Ultrium 800Gb Data Cartidges.
5x new factory plastic wrap sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

Nuweigh JAC101 HGI scale indicator

Skylarc Ref C177542

Make Nuweigh
Model JAC101 HGI
Instrument serial number GRF0019
Display shows model code JAC 101
Maximum capacity 10000 kg
Minimum capacity 100 kg
e value 5 kg


BATTERIES NOT CHARGING.

Specken Drumag pneumatic actuator

Skylarc Ref F177311

Brand Specken Drumag
Type pneumatic actuator
Double-acting cylinder configuration
Two parallel cylinders with common output shaft

SMC Pneumatics CA2D100-65Z Cylinder

Skylarc Ref E177310

Brand: SMC Pneumatics
Model: CA2D100-65Z
Job number: 1025559 W XNZ 04
Type: Double acting pneumatic cylinder
Label text: CYL100X65 D/A
Maximum pressure: 0.99 MPa
Maximum pressure: 145 PSI
Rod end threaded with lock nut
Clevis style rear mounting
Four tie rod construction
Aluminium cylinder barrel
Steel piston rod
Ports located on side of end caps

The Renovator Multi Tool 250W

Skylarc Ref Q163960

Brand is The Renovator
Rated voltage is 230V
Rated frequency is 50Hz or 60Hz
Power consumption is 250 watts
Speed range is 15000 to 21000 cycles per minute
SAA approved model SAA100405EA
Includes one attached oscillating blade

Fujifilm LTO Ultrium Data Cartidges, 5x Units, New

Skylarc Ref Y175822

Fujifilm LTO Ultrium Data Cartidges.
Includes:
- 3x Ultrium 4th gen 800Gb cartidges.
- 2x Ultrium 1st gen 100Gb cartidges.
All are factory plastic wrap sealed new unused cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

VDI 40 Tooling Holders, 9x Assorted Units

Skylarc Ref L175809

VDI 40 Tooling Holders.
9x Assorted Units, see photos for specific type details.
All but one unit is marked as Okuma 40 plus a second number of 1, 2, 3, 7 9, 11, and 12.
The one odd unit has 110mm diameter 70mm thick body.
All have 40mm diameter, 62mm long mounting shanks.

Castrol Techniclean AS 62 20L drum - Used ?

Skylarc Ref O177398

Brand Castrol
Product name Techniclean AS 62
Type Hydrocarbon solvent cleaner
Container steel drum
Label capacity 20 L
Colour green drum with white Castrol

HAND WRITEN NOTE ON TOP
USED - Feb 2019 Full

Naticol BPMG Premium Fish Collagen Powder, 15kg Bulk Bag

Skylarc Ref E175594

Naticol BPMG Premium Fish Collagen Powder.
15kg Bulk Bag in auction.
Date of preparation 06/2022.
Date of minimum durability 06/2027.
Made in the European Union.
New sealed bulk bag.
See our other listings for more Bulk bags of this product.

Fujifilm LTO Ultrium 4th Gen 800Gb Data Cartidges, 5x Units, New

Skylarc Ref Z175823

Fujifilm LTO Ultrium 800Gb Data Cartidges.
5x new factory plastic wrap sealed Ultrium 4th gen cartidges in this auction.
Made in Japan.
Production date of cartidges is unknown.
See our other listings for more lots of these data cartidges.

2x Workbench Top Shelving Storage Assemblies

Skylarc Ref B175955

2x Workbench Top Shelving Storage Assemblies.
Made from 13mm MDF painted in an off-white.
Both units are approx 2465x450x300mm.
Both would benefit from a surface cleanup.

Polycom SoundStation 2 Audio Conference Phone

Skylarc Ref W175820

Polycom SoundStation 2 Audio Conference Phone.
Includes main unit, Universal power module, power cord, Assorted phone line cables, CD-ROM disk.
Unit appears near new showing very few signs of usage.
Factory Cardboard box shows storage wear.

3 Eveready Dolphin Torches

Skylarc Ref D177517

All untested- no batteries

Panasonic PM4H Multi-Range Timer, New

Skylarc Ref R176309

Brand: Panasonic.
Model: PM4H multi-range timer.
Sub model: PM4HA-H-24V.
Part number: ATC12103.
Input voltage: 24V 50/60Hz.
Contact rating: 5A 250V AC.
Front panel dial marked 0 to 10 seconds.
Rotary time setting dial on front.
Plug-in base with 11 pins.
AC15 rating: 1.5A 125V AC.
AC15 rating: 0.75A 250V AC.
ISO Gr A AC250V marking on side
Certifications marked CSA.
Certifications marked UL.
Certifications marked CE.
Manufacturer: Panasonic Industrial Devices SUNX Co Ltd.
Made in Japan.
Original Panasonic box included.
New unused item. Box exterior shows workshop storage wear.

Yoshitake Steam Pressure Reducing Valve GP-11

Skylarc Ref N175993

Brand Yoshitake
Model GP-11.
Type pressure reducing valve.
Service for steam.
Valve size 32A.
Maximum inlet pressure 20 kgf/cm²G.
Reduced pressure range 1.4 to 7 kgf/cm².
Maximum operating temperature 220°C.
Made in Japan.
Body marking 1 1/4 on side.
Mounting flange with multiple bolts.
Top spring housing with external adjustment screw.
Includes Yoshitake GP-11 series Japanese manual.
Manufactured by Yoshitake Works Ltd.
Valve appears unused though has some mild surface rust spotting from storage.

Filters

Skylarc Ref O177372

PBR A13246

JAX Flow-Guard Synthetic Fluid ISO 460 FGS460-005

Skylarc Ref O177346

Approx half remaining

2x Workbench Top Shelving Storage Assemblies

Skylarc Ref C175956

2x Workbench Top Shelving Storage Assemblies.
Made from 13mm MDF painted in an off-white.
Both units are approx 2465x450x300mm.
Both would benefit from a surface cleanup.