SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Three Phase Turret Milling Machine

Skylarc Ref B173615

Model: X6325
Table dimensions: 254mm x 1270mm
Table travel 700mm
Cross travel 405mm
Knee travel 405mm
Spindle travel 127mm
3 feed rates .076mm, .038mm, .203mm
3hp main spindle motor
Sino distal read out
NT40 spindle taper
Spindle speeds 0 - 4200rpm
Power feeds
Manual
Three phase
Manufactured 2004.

To see this machine running:
https://youtu.be/G6HIHTIu9mI

Ceccato CSA15 Air Compressor w/ OMI ED-15A Air Dryer

Skylarc Ref Y171168

Ceccato CSA15/8 G2 air compressor
Year of manufacture 2010
Weight 220 kg
Working pressure 8 bar.
Max pressure 8 bar.
Made in Italy.
Serial number CA1435828.
Product number 4152007007.
Voltage 400 V 50 Hz 3 phase.
Max inlet temperature 40 C.
Max ambient temperature 40 C.
Control panel ES 3000.
Recent service recorded at 7106 hours on 7/6/24.
Aldo includes OMI ED-15A air refrigerator dryer.
Max working pressure 16 bar.
Air flow 1869 litres per minute.
Refrigerant type R134a (0.38 kg).
Electrical power 0.41 kW.
Power supply 230 V 1 phase 50 Hz.
Max inlet temperature 55 C.
Max ambient temperature 45 C.
Serial number 08T-000481.
Tidy machine in running condition

Bridford Single Axle Winch Tipping Trailer

Skylarc Ref Q170328

On road costs included

No

Best contact time

Business hours

Bridford Single Axle Winch Tipping Trailer.
Model No. 8x4 Winch.
Manufactured in 2017.
Tare 390kg
Gross 1000kg.
Tyre size 165x14.
Enclosed bin approx 2450x1310x810mm.
Rego expired 16/11/2025.
WOF expired 01/2023.

Haulotte Optimum 8.1 Scissor Lift

Skylarc Ref F171461

Manufacturer Haulotte Group
Model Optimum 8.1
Serial number CE806878
Year of manufacture 2015
Unloaded mass 1572 kg
Nominal power 4.5 kW
Gradeability 25 percent
Rated load inside use 230 kg
Rated load outside use 120 kg
Maximum allowable manual force 400 N inside use and 200 N outside use
Maximum allowable wind speed 12.5 m/s
Maximum allowable chassis inclination 1.5 degrees
Logbook summary card attached
Control panel with emergency stop and operation switches
Powered by electric drive

Kaeser Airtower 19 Industrial Air Compressor

Skylarc Ref O170248

Model Airtower 19.
Part number 1.8837.2.
Serial number 1884.
Manufactured by Kaeser Kompressoren GmbH.
Year of production 2005.
Rated power 11 kW.
Rated motor speed 3000 rpm.
Maximum working pressure 10 bar.
Ambient temperature range plus 3 degrees. Celsius to plus 40 degrees Celsius.
Sigma Control panel installed.
Pressure gauge on front panel.
Fitted with Kaeser ZK02 component Sach-Nr 9.1354.1.
Second lower Label indicates internal model TU 26 part number 1.8014.2 serial number 8750.
Refrigerant type R134a.
Charge of refrigerant 0.710 kg.
Max pressure (refrigeration system) 18 bar.
Max pressure (air system) 16 bar.
Rated voltage 230V single phase 50 60Hz.
Rated current 5.0A.
Made in Germany

Motosaldatrice Engine Driven Welder on Trailer

Skylarc Ref C173668

Motosaldatrice MPM 12/400 I-KA engine driven welder mounted on Briford tandem axle trailer.
Welder type is MPM 12/400 I-KA.
Rated welding current 480A at 36V 35 percent duty cycle.
350A at 34V 60 percent duty cycle.
300A at 32V 100 percent duty cycle.
Welding voltage 30A to 72V.
Generator output 12 KVA 3 phase 415V or 10 KVA single phase 230V.
Control panel features multiple sockets and meters.
Engine is a Kubota model D1105-E diesel engine.
Runtime hours are 2678.23.
Does run but only if jump started from starter motor
Vendor reports the generator works but the welding doesn't

Trailer manufacturer is Briford Trailers.
Trailer model GRS TANDEM.
Year of manufacture 2000..
Trailer tare weight 300kg.
Trailer gross weight 1500kg.
Tyre size 165x13.
Aluminium checkerplate storage box fitted to trailer drawbar.
Chassis number is 00449975.
Trailer WOF expired 08/2025.
Rego good till 18/08/2026.

Cosen Metal Cutting Band Saw

Skylarc Ref M171104

Model Cosen C-320NC
Manufactured 09/2000
Automatic bandsaw
Powered vice
3-phase 32A plug
Cuts material up to approximately 400mm wide
Drive motor 5 HP
400V operating voltage
MFG No. 891160
Control panel with digital keypad and pressure control
Cosen Machinery Industrial Co Ltd

Dura Splitter Log Splitter with Honda GX200 Engine

Skylarc Ref V171607

Dura Splitter log splitter
Powered by Honda GX200 G.5 petrol engine
Engine features manual recoil start
Hydraulic system visible with hoses and fittings attached
Splitter mounted on a metal frame with wheels for mobility
Splitter head features yellow and green metal construction
Splitter has a steel work table integrated into the frame

Starts and runs however likely to require some adjustment of rise need fall.

MiniConveyor Portable Worksite Powered Conveyor by Access

Skylarc Ref J171101

MiniConveyor Portable Worksite Powered Conveyor by Access Construction Equipment.
See photos for included accesories.
Poower supply unit not included.

Kemppi ProMIG 530 Welder w/ Pro4200 Evolution & ProCool 30

Skylarc Ref J173103

Kemppi ProMIG 530 welding machine.
Power supply requirement 500V 32A 3-phase plug.
Kemppi Pro4200 Evolution wire feeder attached.
Kemppi ProCool 30 cooler attached.
Control panel model MXE MLS.
Welding processes supported include MIG and MMA.
ProMIG 530 input voltage 50V DC.
Maximum output current 520A at 60 percent duty cycle.
Maximum output current 440A at 100 percent duty cycle.
ProCool 30 rated for U1 400V and 1.25kW.
Pro4200 serial number 1034717M.
ProMIG 530 serial number 1036939M.
Includes torch and cables.
Cable plug is PDL 56PA432 rated at 32A 500V 50Hz IP66.
Wire feeder compartment is shown open
Made in Finland.
These units are operational.

MiniConveyor Portable Worksite Powered Conveyor by Access

Skylarc Ref L171103

MiniConveyor Portable Worksite Powered Conveyor by Access Construction Equipment.
See photos for included accesories.
Poower supply unit not included.

7.5kVA Generator Leyland Diesel Engine

Skylarc Ref T171111

Leyland Diesel Engine.
75kVA, 440VAC, 3-phase.
See photos for power output cable details.
Engine is a Leyland Engine type model UE 600/31, unit type model GU 600/12/5, manufacture year unknown.
Hour clock gauge states 422 run hours.
Includes blue canvas cover tarp.
Formerly standby generator for a local engineering company and was run up and tested regularly
You will need your own lifting machinery to load this machine

Single Phase Lathe

Skylarc Ref O170326

Model No.TY-1340BH.
Manufactured in 1989
1000mm between centres
36mm spindle bore
300mm swing over bed
500mm swing over gap
Thread cutting
Morse taper No 3 tailstock taper
200mm three jar chucks
200mm four jaw chuck
250mm faceplate
Fixed steady
Traveling steady
Some tooling

Towable Wood Chipper with Vanguard Engine

Skylarc Ref A171612

Towable wood chipper on two wheels
Powered by a Briggs and Stratton Vanguard engine
Vanguard 12 engine visible on housing
Manual for Vanguard engine models 290000 300000 350000 380000 included
Viking 2000kg rated tow coupling
Painted green and yellow steel construction
In-feed hopper and discharge chute installed
Belt-driven mechanism visible between engine and chipper
Handwritten note on body states starts on ether carb, needs clean, hinges need freeing seized.
Hinges marked as seized in handwriting on hinge
Engine is air cooled and has a recoil starter and key

Kemppi Pro MIG 500 Welder & Pro 4000 Welding Units

Skylarc Ref R173605

Kemppi Pro MIG 500 welder unit
Kemppi Pro 4000 welding unit
Three phase unit
32A 4-pin plug attached
Plug rated IP66 32A 500V 50Hz
Origin Finland
Kemppi model PROMIG 500
Kemppi model PRO 4000
Cable and hoses included as shown
PROMIG 500 rated at 500A at 60 percent duty cycle and 390A at 100 percent duty cycle
PROMIG 500 output 0-18 m/min and 0-25 m/min
PRO 4000 rated 400A at 36V 60 percent duty cycle
PRO 4000 rated 310A at 29.5V 100 percent duty cycle
PRO 4000 input 400V three phase 50-60Hz 25A
Units on wheeled trolley as shown

Hypertherm PowerMax 1650 G3 Series PlasmaArc Cutting System

Skylarc Ref E171668

Hypertherm PowerMax 1650 G3 Series PlasmaArc Cutting System.
32A 3-phase plug.
Includes user manual with CC-ROM disk.

Pair of 4500kg Capacity Aluninium Ramps by Rapid Ramps

Skylarc Ref R170329

Pair of 4500kg Capacity Aluninium Ramps by Rapid Ramps.
Both are Model No.150 330.
4500kg max capacity.
Lengths are 3270mm.
Max widths are 550mm.
Max vehicle tyre width capacity 450mm.

3-Phase Linisher / Sander by Optimum

Skylarc Ref Y171116

3-Phase Linisher / Sander by Optimum.
Model TGM-3
Made in Germany.in 12/2018.
145kg weight.
Brlt dimensions are 100x2000mm.
32A plug attached.
Includes 3x extra sets of belt rollers in varying diameters.
Includes attached material holding vice assembly, see photos.
Includes 10x spare unused sanding belts.
Includes user manual and oladtic toolbox with adjustment tools.
Overall very good condition showing generally mild usage and wear.
Note that locking ring on power plug is detached, see photos.

Petrol Stump Grinder by Loncin

Skylarc Ref B170313

Petrol Stump Grinder by Loncin.
Unknown model number.
Powered with a 420cc petrol engine.
350mm diameter tyres.
280mm diameter cutting blade.
Rusty surfaces.

MasterTig AC/DC Pulse Single Phase 2000 Welder

Skylarc Ref H170319

MasterTig AC/DC Pulse 2000 Welder.
Single Phase.
Casing measures approx 520x250x500mm.
Includes attached Cabling.
Note that grounding pin on plug is damaged and partualy missing, will need replacing before powering up, see photos.

Walker Mowers Model M36-42 Ride On Mower

Skylarc Ref M171884

Walker Mowers ride on mower.
Model number M36-42.
Designed and built by Walker Manufacturing Company Fort Collins Colorado USA.
Equipped with GHS grass handling system.
Forward speed control lever installed.
Throttle and choke control levers installed.
Ignition key included.
Black vinyl seat with molded design.
Yellow steel mowing deck with front caster wheels.
Rear grass collection box in white plastic.
Model plate located near operator seat.
Non runner, parts only

Akira-Seiki Vertical Machining Center

Skylarc Ref C173616

Model: Akira-Seiki A-650 Vertical Machining Center
X-Axis travel 650mm
Y-Axis travel 350mm
Z-Axis travel 400mm
Spindle Nose to Table Surface 200-600mm
Pallet Size 650 x 350mm
Pallet Loading Capacity 120kg
Spindle speeds 12-12000rpm
Spindle Drive 5.5/7.5kW
HSK-63A spindle taper
8 x tool holders
24 tool carousel
Pair of matched vices
Fanuc Series Oi-MC CNC controller
Manufactured 2005
Was running when removed from work approx 6 months ago
You will need your own lifting equipment to load this machine

Steel Workbench with Irwin Vice

Skylarc Ref I171490

Steel workbench with rectangular top.
Workbench includes a mounted Irwin metalworking vice.
Vice is attached to one end of the workbench.
Workbench frame and under-shelf are metal construction.
Workbench surface shows significant rust.
Single lower storage shelf spans the length of the bench.
Four round steel legs support the structure.
Workbench top features a cutout section near the vice.

Single Phase Drilling & Milling Machine by Handy-Age

Skylarc Ref N171183

Single Phase Drilling & Milling Machine by Handy-Age.
Made in Taiwan.
Motor is dated 1990.
Slotted mounting table is 510x160mm.
Morse Taper No.3 chuck.
Machine is mounted on an included 950mm high all steel stand with inner storage.

Vintage 3-Phase Radial Arm Drill by Asouith

Skylarc Ref O171106

Vintage 3-Phase Radial Arm Drill by Asouith.
ID plate missing from drill so age, and model details unknown.
900mm drill arm length.
Adjustable height Drill table 770x510mm.
No.4 Morse tapered drill chuck with a No.4 to No.3 shank adapter attached.
3-Phase 16A plug.

20-Foor Shipping Container Worksite Workshop/Smoko Room

Skylarc Ref M172066

20-Foor Shipping Container Worksite Workshop/Smoko Room.
The Container has been divided into two interior rooms.
The first room with the original Container doors is set up as a work room with stere topped wall Workbench plus a plywood Workbench at back. Light switch and singe phase plug on back wall. This room measurea approx 3450mm long.
Second room is set up ad a smoko/lunch room with built in table with benches, A cupboard with sink (no tap installed), and two electric heaters. A door had been cut into Container side, door measures approx 600mm wide. A window has been cut our of back wall, its glass is laying on the table.

Container shows moderate rusting, some possible ceiling leaks in workshop room. Container outer bottom framework is severely rusted and may need reinforcing/repair.

Alfra Rotabest 40 RQ Magnetic Drill

Skylarc Ref U110048

Alfra Rotabest 40 RQ Magnetic Drill.
Single phase motor.
Power input 1200 Watt.
Rotational speed 250 or 450 rpm.
Rota-Quick holder system.
Core drill diameter range 12 to 40 mm.
Maximum cutting depth 50 mm.
Operating voltage 230 Volt.
Frequency 50-60 Hz.
Magnet power input 125 Watt.
Adhesion force 16000 Newton.
Manufacturer Alfred Raith GmbH.
Made in Germany.
Model number and rating information shown on identification label.

Steel Workbench with Record 35P Steel Vice

Skylarc Ref J171465

Steel workbench with rectangular steel top.
Bench surface shows rust across the top and shelf.
Contains a Record Steel 35P bench vice mounted on the top surface.
Bench has four steel legs.
Lower steel shelf divided into three sections.
Vice is manually operated via handle.
Bench is constructed with welded steel frame and flat steel surface.

Vintage Remote Control P-51 Mustang Scale Model

Skylarc Ref E173670

Remote Control P-51 Mustang Scale Model Petrol Flyable Plane.
Lightweight plastic, balsa wood, and foam construction.
2.3-metre length, nearly 3-metre wingspan.
Super Tigre 3000s two cylinder glow engine
860mm diameter propeller.
Retractable landing gear.
See photos for visible electronics
Impressive vintage model ready for new life

3M Versaflo M-307 Respirator with Adflo PAPR Unit

Skylarc Ref Z171819

3M Versaflo M-307 respiratory helmet included.
M-307 is part of the M-300 series.
Helmet meets EN 12941, EN 14594, EN 397 LD, and other standards as labeled.
Label date code is 04/2021.
The system includes 3M Adflo powered air purifying respirator unit.
Adflo unit includes battery with indicator display.
Flexible hose connects the Adflo unit to the helmet.
Charger for Li-Ion battery with AU/NZ plug supplied.
Charger input 100-240V AC 50-60Hz and output 12.8V 1.8A as labeled.
Head harness and waist belt included

MAXbor MB351L Magnetic Core Drill

Skylarc Ref T171527

Model MB351L.
230V 50-60Hz 1100W.
No load speed 300 or 450 RPM.
Core cutter capacity 35mm by 35mm (L).
Twist drill bit capacity 13mm by 140mm (L).
Includes MAXbor carry case.
Includes three handles.
Includes spanner and hex key.
Includes coolant bottle with tubing.
Includes user manual.
Power switch and separate magnet on/off controls

Assorted Milling and Tapping Tool Holders Collection

Skylarc Ref O171808

Lot includes various milling and tapping tool holders.
One tool holder is marked with WALTER F4042B 063 Z05 for milling applications.
Includes a N02 Reversible Tapping Chuck with 1/8 inch to 1/2 inch capacity.
Tapping chuck is No 2 Morse Taper and manufactured by Piper Tools Australia.
One tool holder is fitted with a standard keyed drill chuck.
A tool holder for threading die is included.
One precision boring head is present with dial adjustment visible..

Alfra Rotabest 40 RQ Magnetic Base Drill

Skylarc Ref Q110044

Alfra Rotabest 40 RQ magnetic base drill
Model number 40 RQ
Serial number 40112846
Rated input power 1200 Watt
Rotational speed 250 or 450 rpm
Rota-Quick tool holder
Core drill diameter range 12 to 40 mm
Maximum cutting depth 50 mm
Rated voltage 230 Volt
Frequency 50-60 Hz
Year of construction 2011
Magnet input power 125 Watt
Magnet adhesion 16000 N
Manufactured by Alfred Raith GmbH
Made in Germany

WIA Weldmatic Fabricator Welder w/ Wire Feeder

Skylarc Ref M173600

WIA Weldmatic Fabricator Welder w/ Wire Feeder.
Welder Type No CP33
Wire Feeder Type No W17.
3-phase 32A 4-pin plug.
Includes attached Cabling.
Vendor states this unit is operational.

3M Speedglas G5-01 Welding Helmet with Adflo PAPR Unit

Skylarc Ref A171820

3M Speedglas G5-01 welding helmet is included.
Adflo powered air purifying respirator unit is included.
Flexible hose is attached between helmet and Adflo unit.
Helmet has an adjustable headband.
3M branding is visible on the helmet shell.
Control dial is present on the helmet exterior.
Charging adapter is included.
Adflo unit has indicator lights for power and battery status.
Label inside helmet identifies model as G5-01.
Helmet conforms to 3M EN 175 B, 3M EN 166 B, 3M EN 12941 TH3, and 3M EN 14594 3B certifications.

3M Versaflo M-307 Adflo Powered Air Purifying Respirator

Skylarc Ref Y171818

3M Versaflo M-307 headtop included.
M-307 part of the M-300 series.
3M Adflo powered air purifying respirator unit included.
Unit shows 3M Adflo branding on blower.
Flexible hose connects headtop to Adflo unit.
Battery indicator present on Adflo unit.
Power adapter/charger included.
New Zealand power plug on charger.
Harness and belt system included with Adflo unit.
Protective face shield integrated with headtop.

Philips BVP151 LED Floodlight 50W 220-240V

Skylarc Ref L171779

Philips BVP151 LED Floodlight
Model: BVP151 LED50/NW
Power rating 50W
Voltage rating 220-240V AC
Frequency 50/60 Hz
Input current 0.22A
LED array 100 x 0.45W LED
Ingress protection rating IP65
Colour temperature 5600 Kelvin
Power factor 0.9
Ambient temperature specification t:25°C
Multiple units included
Cable ends are unterminated
Made in China

Wire Mesh Pallet Racking Shelves

Skylarc Ref I171776

Wire Mesh Pallet Racking Shelves

Mobile Platform Ladder by Ullrich

Skylarc Ref P170327

Mobile Platform Ladder by Ullrich.
Model number unknown.
Platform height above floor approx 1970mm.
150kg max load.
Plastic wheels for mobility.
Aluminium construction.

Alfra Rotabest Piccolo 32/50 WD Magnetic Drill

Skylarc Ref X110051

Model Alfra Rotabest Piccolo 32/50 WD
Made in Germany
Input power 1100 watt
Single phase 230 volt
Frequency 50-60 Hz
Rotational speed 450 rpm
Drill holder 19mm Weldon
Core drill diameter range 12-32 mm
Maximum cutting depth 50 mm
Magnet input power 28 watt
Magnet adhesion 8000 newton
Year of construction 2011
Includes user manual
Includes three detachable handles
Includes orange plastic carry case

Trupro Metal Belt Grinder Sander BG1502

Skylarc Ref E171694

Trupro Metal Belt Grinder Sander.
Model No.BG1502.
Belt size 150x2000mm
Conta t wherl 200x150mm.
3-phase 32A plug.
Includes 4x spare as new Z40 grit belts.
Machine shows surface rusting, see photos.
Has been in storage for some time.

Tapmatic 70 TC/DC Reversible Tapping Attachment

Skylarc Ref T171787

Tapmatic 70 TC/DC reversible tapping attachment
Capacities M5 to M18 and #10 to 5/8 inch
Maximum RPM 1000
Manufactured by Tapmatic International Corporation
Made in Kriessern, Switzerland
Patented design
Label on unit specifies model and specifications

F-16 Radio Control Flyable Scale Model

Skylarc Ref D173669

F-16 Radio Control Flyable Scale Model.
1.9-metres long, 1.3-metres wide.
Lightweight plastic, balsa wood, and foam construction.
Includes installed glow engine, OS Max, unknown CC rating
Ducted fan unit
One external "Fuel tank" is detached.
Front foam nose cone is loosely taped on.
No remote

Biesse Akron Edge Bander

Skylarc Ref A172236

Manufacturer Biesse
Model Artech Akron 435
Year of construction 2010
Serial number 54233
Power supply voltage 415V AC
Rated current 20A
Number of power supply phases 3
Power 8.3kW
Frequency 50Hz
Control panel with touchscreen interface
Equipped with integrated material feeder
Multiple dust extraction ports installed
Made in Italy
Ex joinery shop closure

Stainless steel press filter sheets

Skylarc Ref H171879

Stainless steel press filter sheets
Stacked on a pallet
Each sheet has multiple perforations
Material is stainless steel
Sheets are wrapped in plastic film
Suitable for industrial filtration applications

Mobile Aluminium Scaffold Tower

Skylarc Ref C171536

Mobile scaffold tower constructed from aluminium tubing
Platform deck
Four swivel castor wheels with foot brakes
Cross-brace supports for stability
Rectangular work platform surface
Guardrails fitted above platform level

One wheel lock broken

ESAB Caddy Tig 2200i AC/DC Welder, Faulty, Parts Only

Skylarc Ref E173124

ESAB Caddy Tig 2200i AC/DC Welder.
Measures 400x175x345mm
Single phase.
NOTE that this unit is faulty, plug has been cut off for safety. Specific failt reasons are unknown. Parts usage only!

Assorted Pallet Racking Components

Skylarc Ref Q170276

Assorted Pallet Racking Components.
Includes:
- 3x galvanised steel vertical frames each 915x80x2060mm.
- 6x orange horizontal beams each 2740x40x80mm.
- 10x light orange horizontal beams each 2740x50x100mm.
32x shelf support cross bars.
7x 25mm thick MDF Shelving boards

8x Modern Office Boardroom Chairs

Skylarc Ref A171690

8x Modern Office Boardroom Chairs.
Unknown manufacturer.
Manufacturerd in 2016.
Modern design with soft faux black leather seat and backs with chrome metal arm rests and legs.
All are on castors for mobility.
Seat height adjustable from approx 450mm to 550mm.
Seat width between armrests is approx 510mm.
Total Seat width 590mm.
Back height from Seat 470mm.
All show generally light usage marks, mainly on chrome arm rests and leg ends.
See our other auction for another lot of 8 of these office chairs.

Power-Mac V9445A Magnetic Drill

Skylarc Ref W110050

Power-Mac V9445A magnetic drill.
Drill capacity for steel is 45mm.
Rated voltage is 230V at 50Hz.
Rated input power is 1200W.
No-load speed is 0 to 350 revolutions per minute.
Magnet attraction force is 12000 Newtons.
Maximum travel is 180mm.
Front speed control dial present.
On and off switch located on side panel.
Fuse holder is accessible on the main control panel.
Handle for feed advancement included.
Base contains two large circular magnets.

Lockformer Sheet Metal Roll Former

Skylarc Ref C171120

Lockformer Sheet Metal Roll Former.
20ga capacity.
3-phase 16A plug.

Assorted Press Brake Tooling

Skylarc Ref Y173144

Assorted Press Brake Tooling.
Tooling lengths vary from 200mm up to 1825mm.
Unknown what brand/model of press these were originally from.
12x pieces in this auction.

Forklift Extension Forks

Skylarc Ref H171489

2200mm long and 175mm wide

25-Ton Capacity Bow Shackle w/ Digital Weight Scale Bolt & Display Unit

Skylarc Ref B171665

25-Ton Capacity Bow Shackle.
Shackle measures 290mm long.
Includes PT Ltd branded Digital Weight Scale Bolt assembly.
Includes Rinstrum R320 digital scale display unit. Can be powerd by either 4x AA batteries or AC power adapter cord. Note that the battery compartment shows battery acid damage.. The alternative AC power source cavle is missing, buyer will need to source a replacement AC adapter cord to power scale.

Kemppi Minarc 150 AU VRD Welder

Skylarc Ref W171530

Kemppi Minarc 150 AU VRD model.
Made in Finland.
Input voltage 240V.
Rated input current 15A.
Single phase 50-60Hz operation.
VRD safe functionality present.
IP23S protection rating.
Output current range 10A to 150A.
Duty cycle 150A at 35 percent.
Duty cycle 100A at 100 percent.
Open circuit voltage 85-90V.
Electrode holder with yellow handle included.
Earth clamp included.
Supplied with attached power cable and 15amp plug.
Serial number 1780873A present on rating plate.
Compliance with IEC 60974-1 and IEC 60974-10.
Carrying strap attached to unit.

Assorted Metal Melting / Casting Tools

Skylarc Ref V171191

Assorted Metal Melting / Casting Tools.
Includes:
Heavy iron or steel pot approx 165mm diameter, 135mm high, with hardened metal pooled inside.
Fishing weight mold tool No.132189.approx 330mm long.
Heavy Iron Ingot mold with varying sizes of Ingot molds, overall size 235x155x45mm.
Gas burner base.
Ladle for molten metal use.

Industrial Hydraulic Tank w/ Single Phase Motor Pump.

Skylarc Ref I171620

Industrial Hydraulic Tank w/ Single Phase Motor Pump.
CMG branded 2.2kW Single phase pump Motor.
Tank size approx 600x450x400mm.
Includes heavy steel stand.

Press Brake V-Block, 2770mm Length

Skylarc Ref H165114

Press Brake V-Block, 2770mm Length.
Unknown manufacturer.
See photos for design details.

Assorted Structural Steel Sections

Skylarc Ref J171491

Assorted steel sections included.
Various sizes and profiles visible in images.
Material shows surface rust.
Includes channels and box sections.

Forklift Extension Forks

Skylarc Ref P172199

3200mm long and 250mm wide

Ponstar PX-55022 Submersible Pump

Skylarc Ref U171502

Model PX-55022
Type PX-55022-BAA-1
Inlet diameter 50 mm
Inlet diameter 2 inch
Voltage AC 220V 50 Hz
Flow rate 260 litres per minute
Power 400 watts
Current 3.2 amps
Maximum head 10 metres
Manufacturer Oriental Koshin Ltd
Made in Japan
50 Hz operation

CEA Digistar 250 Dual Pulsed Welder

Skylarc Ref Q173110

CEA Digistar 250 Dual Pulsed welder.
3- phase 20A 4-pin plug attached.
Attachments not included.
Vendor tells us this unit is functioning.

8x Modern Office Boardroom Chairs

Skylarc Ref Z171689

8x Modern Office Boardroom Chairs.
Unknown manufacturer.
Manufacturerd in 2016.
Modern design with soft faux black leather seat and backs with chrome metal arm rests and legs.
All are on castors for mobility.
Seat height adjustable from approx 450mm to 550mm.
Seat width between armrests is approx 510mm.
Total Seat width 590mm.
Back height from Seat 470mm.
All show generally light usage marks, mainly on chrome arm rests and leg ends.
See our other auction for another lot of 8 of these office chairs.

OKS Otto Klein 250L Pressure Vessel Tank

Skylarc Ref M171754

Manufacturer OKS Otto Klein GmbH
Model 04-202-033
Material number 3.5588.3
Serial number 3222
Capacity 250 litres
Maximum working pressure 11 bar
Minimum working temperature minus 10 degrees Celsius
Maximum working temperature 80 degrees Celsius
Year of construction 2004
Fitted with multiple ports and fittings
CE 0044 certification mark present

Milwaukee MS 305 DB 305mm Compound Mitre Saw

Skylarc Ref P171601

Milwaukee MS 305 DB compound mitre saw.
305mm blade diameter.
Rated power 1800W.
240V supply.
50Hz frequency.
No-load speed 3200 min-1.
LCD display panel integrated.
Adjustable mitre angle base with scale.
Dust extraction port at rear.
Material clamp included on base.
Transparent blade guard installed.
Red laser guide feature visible on base.
Model and serial badge present on body.
Milwaukee Electric Tool Corp manufacturer.

Cigweld PlateMate 2 Gas Cutting Machine w/ Track

Skylarc Ref W171712

Cigweld PlateMate 2 Gas Cutting Machine w/ Track.
Track measures 1830x170mm.
Single phase.

27x Assorted Morse Taper Shank Drills

Skylarc Ref B170261

27x Assorted Morse Taper Shank Drills.
Metric and Imperial sizes.
Sizes range from 16mm to 1 1/2".
Condition varies with each drill.

Mixed Steel Sections and Beams Lot

Skylarc Ref K171492

Lot consists of various steel sections and beams.
Includes rectangular hollow sections of different sizes.
Includes I-beam and angle steel sections.
Sections are visibly rusted on surface.
Multiple lengths and profiles

Garrick Floor Standing Drill Press

Skylarc Ref N171755

Brand Garrick
Floor standing drill press
Motor power 1 horsepower
Motor voltage 240V single phase
Motor current 4.8A
Frequency 50Hz
Motor RPM 1400
Class B motor insulation
Equipped with multi-step pulley system
Fitted with a standard three-pin plug
On and off switch with emergency stop
Cast iron work table with slots
Chuck installed

Rivet Gun DFS 311 T

Skylarc Ref L173651

Rivet Gun.
Model No. DFS 311 T.
Unsure of manufacturer.
Includes inserts for M6, M8, M10, and M12 size Rivets.
Includes non-original steel case.

Paslode Impulse FrameMaster 30 Degree Framing Nailer

Skylarc Ref F171539

Paslode Impulse FrameMaster 30 Degree Framing Nailer
Model B20540
Compatible with nails diameter 2.8mm to 3.4mm
Compatible with nails length 50mm to 90mm
Smooth and ring nail compatibility as per label
Includes Paslode battery
Includes Paslode battery charger
Includes power adapter for charger
Includes plastic Paslode carry case
Includes a canister of Paslode tool oil
One fuel cell is present
30 degree angle magazine
Manufacturer: Paslode, an ITW company, Vernon Hills, IL, USA

Campion and Irving Ltd 2500L Diesel Tank

Skylarc Ref D171485

Manufacturer Campion and Irving Ltd Christchurch
Serial number 3662-97 NO1
Test date 03/97
Capacity 2500 litres
Material 3MM AS1594-HA250
Design pressure atmospheric
Design temperature ambient
Contents diesel 0.85kg per litre
End fittings and piping present on the tank
Gauge installed on pipework
Labelled for diesel use
Mounted on four steel legs
Steel construction

Cigweld TransMIG 400 Welder w/ TransMIG 4R Wire Feeder

Skylarc Ref Q173604

Cigweld TransMIG 400 Welder w/ TransMIG 4R Wire Feeder.
3-phase 20A 4-pin plug.
Includes attached hoses and cables.
Vendor states this unit is operational.

Welding Rotisserie Frame with Casters

Skylarc Ref D171641

Steel rotisserie frame with white painted finish.
Includes two upright posts with yellow end plates.
Each upright post has a caster base for mobility.
Yellow steel crossbar with flanged ends included.
Mounting flanges have multiple bolt holes for adjustment.
Frame sections connected with bolts and brackets.

Approx size 5400mm x 1600mm

Custom Built Platform Trolley Jack

Skylarc Ref L171181

Custom Built Platform Trolley Jack.

Height adjustable from approx 250mm to approx 795mm.
Top platform length 1990mm, width 665mm.
Trolley Frame 2000mm long, 690mm wide.
Manual hydraulic ram assembly attached underneath, its weight lifting capacity is unknown.
See photos for design details.
NOTE that the Hydraulic ram is leaking fluid.

Large Heavy Duty Workbench

Skylarc Ref N170247

Large Heavy Duty Workbench.
50x50mm box steel frame.
MDF board surfaces.
Work surface 1000mm above floor.
360mm wide upper back shelf.
Note that one rear foot is missing, see photos.

Petrol Air Compressor

Skylarc Ref I171100

Petrol Air Compressor.
Powerd by a 5.5hp Honda GX160 engine.
Compressor brand/model unknown.
Tank capacity ity unknown, tank measures 640mm long, 310mm diameter.
Appears to have been unused for some time as petrol tank is dry, see photo. Engine compression feels OK when cord is pulled.

Milling Vice Unit

Skylarc Ref X171115

Milling Vice Unit.
Unknown manufacturer/model.
Mounting base 485x160mm.
160mm wide jaw mounts, jaw insert plates not included.
Opens to approx 200mm.
35mm diameter threaded rod.
Jaw movement crank is missing.

Vintage Toolbox w/ Tools

Skylarc Ref C171172

Vintage Toolbox w/ Tools.
Steel Toolbox filled with vintage handtools including Pliers, screwdrivers, sockets, torque wrench, Files, and much more, see photos.
Conditions vary with each item.

Crane Scale 3000kg

Skylarc Ref V171529

Maximum capacity is 3000kg
Digital display shows weight in kilograms and pounds
Zero and tare functions available
Hold and 2nd functions available
On off power switch located on front panel
Battery box with DC 9V input
Large metal hook for load attachment
Sturdy metal shackle for lifting
Plastic outer case is orange in colour
CE mark on front panel

Requires a 9v DC power cable to charge battery. - NOT INCLUDED

Stainless Steel Conveyor with Hydraulic Cutter Frame

Skylarc Ref J171517

Stainless steel frame structure
Integrated conveyor belt
Conveyor constructed from stainless steel components
Hydraulic cylinder attached to main frame
Rotary cutting blade mounted on shaft
Chain sprocket mechanism visible
Multiple guide rollers for conveyor alignment
Hopper feeder at intake of conveyor
Electrical conduit mounted on frame
Cutting blade and hydraulic components show external surface rust
Wiring and hoses present on assembly

Metal Parts Drawer Cabinets 2 Units

Skylarc Ref R171759

Two metal drawer cabinets.
Each cabinet contains 15 drawers.
Total of 30 drawers.
Each drawer has a metal pull handle.
Each drawer measures 300mm x 400mm x 1320mm

Commercial Benchtop Donut Maker

Skylarc Ref X162673

Commercial Benchtop Donut Maker.
Unknown brand.
Model No.T-101
Single Phase 16A plug.
Stainless steel construction.
Very dirty and oily surfaces, would benefit from a major cleanup.
Unknown if operational.

Miller Maxstar 151 Constant Current DC Inverter Arc Welder

Skylarc Ref K170322

Miller Maxstar 151 Constant Current DC Inverter Arc Welder.
Single phase.
See photos for included Cabling.
Plug shows damage, see photo.

Single Phase Industrial Metal Cutting Bandsaw

Skylarc Ref M171182

Single Phase Industrial Metal Cutting Bandsaw.
Unknown manufacturer and model.
Motor dated 1992.
300mm wide cutting width.
Max material thickness 150mm.
Mounted on wheels for mobility.

Garrick Bench Drill Press and Drill Press Tapping Machine

Skylarc Ref P171757

Includes one Garrick Machine Tool bench drill press.
Includes one Drill Press and Tapping Machine.
Both machines are mounted to a single wooden workbench.
Both drill presses have electric power cords with plugs attached.
Garrick drill press features an emergency stop button and three-spoke hand wheel.
Tapping machine features three-spoke hand wheel and labelled control switches.
Each drill press is equipped with an adjustable work table.
Metal table surfaces show signs of use with cuts and marks.

68 Small Metal Plates

Skylarc Ref L171441

Lot of 68 metal plates
Each plate is approximately 460mm long
Each plate is approximately 190mm wide
Each plate is approximately 40mm thick
Each plate weighs roughly 21 kilograms
Plates have a rectangular shape with notched ends
Plates have visible surface rust

Master 3 Ton Lever Block Hoist 1.5m

Skylarc Ref O171444

Master lever block hoist.
Rated capacity 3 ton.
Maximum lift height 1.5 metres.
Manual operation with lever handle.
Includes two large metal hooks with safety latches.
Heavy duty chain included.
Serial number 505108.

Heavy Duty Pipe Bending Assembly w/ Assorted Attachments

Skylarc Ref O171184

Heavy Duty Pipe Bending Assembly w/ Assorted Attachments.
Unknown manufacturer.
Includes a bin filled with varying diameter pipe bending wheels.
Max pipe bending capacity is approx 40mm diameter.

Assorted Lots of Steel

Skylarc Ref F171487

Assorted lots of steel sections

Sandvik Coromant Face Mill Cutters and Tool Holders Lot

Skylarc Ref E171850

Lot includes six Sandvik Coromant face mill cutter heads.
Face mill cutter markings include R479.9-505036-16, R471.38-636345-22M, and R471.5-636345-16.
Insert pockets present on all face mill cutters.
Three tool holders included.
One additional tool holder has MT4 taper.
One Iscar MULTIMASTER shank marked MM S-A-L120-C20-T12 3188022 is included.
One additional cylindrical tool holder included.
Visible indexable inserts on all face mill cutters.

Assorted Aluminium Edging / Corner Strips

Skylarc Ref A172080

Assorted Aluminium Edging / Corner Strips.
Varying lengths with most units up to 3000mm in length.
See photos for end profiles designs.
Strips appear unused but show some dirt and some marks from storage.

ESAB OrigoTig Single Phase Welder

Skylarc Ref J170321

ESAB OrigoTig Single Phase Welder.
Casing measures approx 345x170x300mm.
Includes attached Cabling.
Power cord has been pulled loose from casing exposing inner wires, see photis.

13x Large Galvanized Turnbuckles

Skylarc Ref A171716

13x Large Galvanized Turnbuckles.
50mm thread diameter
Body 410mm long, 75mm diameter.
Some have D-shackles attached.

Mikasa MGX 280W Concrete Vibrator

Skylarc Ref B171457

Mikasa brand model MGX
Rated power 280W
Voltage 230V
Frequency 50-60Hz
Current 2.0A
Speed 12000-15500 V.P.M
Made in Japan
Serial number S1748A
Fitted with three pin plug
Handheld motor unit with attached flexible shaft and vibration head
Metal construction housing
Model number on label NPA-1215

WIA Weldmatic 180s Single Phase MIG Welder

Skylarc Ref N173601

WIA Weldmatic 180s Single Phase MIG Welder.
Type No.CP17
Wire Feeder Type No.W19.
Dingle phase 10A plug.
Older unit that vendor states is in operating condition.

ESAB OrigoTig 150 Welder

Skylarc Ref Y171532

ESAB OrigoTig 150 welding machine
Input power supply 230V 50/60Hz
Output current max 150A
Duty cycle 150A at 35 percent 140A at 60 percent 110A at 100 percent
Open circuit voltage 71 to 78V
IP23C rated
Includes electrode holder and cables
Control panel with digital display
Made in Sweden
Model number 405-416-0361
For TIG and MMA welding processes

Assorted End Mills, Drills, & More

Skylarc Ref G170266

Assorted End Mills, Drills, & More.
Sizes from 3.5mm to 20mm.
See photos for details on types of end mills included.
Condition varies greatly with each unit. Some are as new while others show widely varying levels of use.

Assorted Palket Racking Components

Skylarc Ref S170278

Assorted Palket Racking Components.
Includes:
- 4x vertical frames each 670x80x1830mm.
- 16x orange horizontal beams each 2440x55x90mm.
- 8x 25mm thick MDF Shelving boards.

All items are very dirty and oily with moderate rust spotting on vertical frames.

Grundfos AllDOS DME375-10AR Dosing Pump w/ Stand

Skylarc Ref F168336

Grundfos AllDOS dosing pump.
Model DME375-10AR PV/V/G-F-31A2A1.
Type label indicates IP65 protection rating.
Power supply rated for 100-240V 50/60Hz.
Maximum current 2.4A.
Maximum power 240W.
Maximum pressure 1.0 MPa (10 bar).
Maximum flow rate 3.75 l/h.
Control panel with display.
Mounted on a metal stand 300x260x600mm.
Includes connected hoses and fittings as pictured.
Fitted with 16A 250V 50Hz power plug with damaged pins, see photo.
Made in France.

CG-30 Tiger Gas Track Cutter w/ 2x Tracks

Skylarc Ref X171713

CG-30 Tiger Gas Track Cutter.
Includes 2x Tracks, one track is new and unused in manufacturerr packaging.
Single phase.

Assorted Steel Box Section and Angle Iron Lengths

Skylarc Ref G171488

Assorted steel box sections included.
Multiple sizes of rectangular and square hollow sections visible.
Assorted angle iron lengths included.
Sections show surface rust on most pieces.

Single Phase Drill Press

Skylarc Ref L170323

Single Phase Drill Press.
Unknown manufacturer.
Model No.RDM-100F.
Single phase.
310mm diameter table.
16mm Keyed chuck, key is included.

600mm Lathe Chuck

Skylarc Ref L171831

Four jaw independent lathe chuck.
Approximate diameter is 600mm.
Chuck body is metal with machined concentric rings.
Equipped with four reversible jaws.
Multiple threaded holes in the face for mounting or accessories.
Yellow-brass adjuster nuts visible on face.
Circular lifting eye bolted into chuck body.
Surface oxidation visible on exterior surface.

Laboratory Glassware Pipettes and Burettes Assorted Lot

Skylarc Ref N168214

Assorted lot of laboratory glassware including pipettes and burettes
Includes multiple volumetric pipettes with capacities up to 50 ml
Includes graduated pipettes with various capacities and graduations
Contains several glass burettes with plastic and glass stopcocks
Some burettes have blue, red, black or orange stopcock handles
Multiple pieces marked with brands such as Fortuna and Volac
Several pipettes marked 50 ml and 25 ml
Graduations visible in millilitres on several items
Largest pipettes measure approximately 60 cm in length
Items are unboxed and loose

4 Inch Belt and 6 Inch Disc Sander

Skylarc Ref U171866

4 inch belt and 6 inch disc sander
Voltage 240V 50Hz
Power 350W
Belt size 100x915mm
Disc size 150mm diameter
Belt operates in horizontal and vertical positions
On off switch located at the front of the unit
Metal work tables for belt and disc sanding
Angle adjustable support with handle on disc sander table
Dust extraction port at rear

Single Phase Coolant Pump Assembly

Skylarc Ref K171128

Single Phase Coolant Pump Assembly.
Manufactured by Frank Phoenix.
Model No.MP150
Manufactured 03/2011.
Tank measures approx 345x250x180mm.

Assorted Buffing, Polishing, Grinding Wheels / Pads

Skylarc Ref I173674

Assorted Buffing, Polishing, Grinding Wheels / Pads.
Diameters from 80mm to 190mm.
See photos for details on variety and types included.
Most appear as new unused, some others show prior usage l.

Pallet of Assorted Bolts, Nuts, Washers, & More

Skylarc Ref W171660

Pallet of Assorted Bolts, Nuts, Washers, & More.
Mainly galvanized and zinc coated varieties.
Also includes Anchor Bolts, rolls of roller chain.
Thousands of units on pallet.
See photos for further detsils on included items.
Condition varies with each unit. Most appears unused, some others may be used.

Portable Automatic Gas Cutter HK-55

Skylarc Ref Z171663

Portable Automatic Gas Cutter.
Model No.HK-55
Unknown manufacturer.
Includes steel case 570x225x110mm.
Cutter and its accessories are as new unused. Case exterior shows some scratching and marks from storage.

TIF XP-1A Refrigerant Leak Detector

Skylarc Ref S171864

TIF XP-1A Refrigerant Leak Detector unit.
Includes TIF XP-1A main detector device.
Flexible sensing tip attached to unit.
Comes in black plastic carrying case.
Owner's manual included.
Comes with two TIFXP-2 replacement sensing tips in sealed bag.
Manual is in multiple languages.
Battery powered operation.
Control panel includes mute, reset, on, off, sensitivity, and battery test buttons.

Assorted Tools, Accessories, & Hardware Comsumables

Skylarc Ref P172069

Assorted Tools, Accessories, & Hardware Comsumables .
Various Drills, hole cutters, air sprayers, grease gun, paint brushes, sanding paper, and many other hardware tools, parts etc.
Condition varies greatly with each item.

5x Assorted F-Clamps

Skylarc Ref F173645

5x Assorted F-Clamps.
Includes:
- 1x Strong Hand Tools model UM205M clamp, 660mm length, 150mm wide head.
- 1x Strong Hand Tools model UG1657M clamp, 530mm length, 200mm wide head.
- Unbranded clamp 630mm long, 150mm width.
- Unbranded clamp 550mm long, 200mm width.
- Record No.132 clamp, 920mm long, 140mm width.

Condition varies with each tool.

John Deere 10 Trailer Cart

Skylarc Ref C171640

John Deere model 10 trailer cart
Green steel body
Black steel tow arm
Two black rubber wheels with yellow rims
Rust visible inside the tray and on the tailgate
Removable tailgate for unloading
Tow hitch at the front suitable for riding mower or small tractor
Approx 1800mm x 900mm tray

Rear tailgate loose and missing mount on tray.

Metric Thread Tap Set

Skylarc Ref J171439

Metric Thread Tap Set.
Unknown manufacturer.
Diameters up to 18mm.
Most taps appear unused or slightly used.
Set is not complete, see photos.
Steel case measures 485x320x46mm.
Steel case exterior shows workshop storage wear. One case latch is damaged.

Hitachi 250kg Electric Chain Hoist

Skylarc Ref B172055

Hitachi 250kg Electric Chain Hoist.
3-metre Chain length.
6.3mm chain size.
3-phase 32A plug.
Very dirty from storage
Operational condition is unknown.

Assorted Lifting Clutches, Bow Shackles, Wire Rope Thimbles

Skylarc Ref U172074

Assorted Lifting Clutches, Bow Shackles, Wire Rope Thimbles.
5x 5-ton capacity lifting Clutches.
1x 8.5-ton Capacity bow shackle.
1x 4.75-ton Bow shackle missing its pin.
2x wire rope thimbles each of a different design.

Enerpac Hydraulic Cylinder RC,-102

Skylarc Ref T171189

Enerpac Hydraulic Cylinder.
Model No.RC,-102.
54mm stroke.
10-Ton capacity.
120mm collapsed height.
https://www.enerpac.com/en-au/general-purpose-cylinders/general-purpose-cylinder/RC102?srsltid=AfmBOoqmhgSxtoqKwt-5hqoE2hRKcRWatqpkHk-A9eZpMBOm3BMXLhKM

3x RS Pro Green Plastic Sheets, 500x500x10mm Each

Skylarc Ref G172060

3x RS Pro Green Plastic Sheets.
All are 500x500x10mm each.
Code No.771-213
Made in Germany
As new and still in RS shipping packaging/Strapping.
See the RS website below for further specs:
https://nz.rs-online.com/web/p/plastic-sheets/0771213?srsltid=AfmBOop7rCeBVWFvHj3tc_vywUc-K88E_dkTUmf8En1Ub_zG3USj7Q5R

46 Metres of 16mm2 2 Core TPS Electrical Cable

Skylarc Ref Z171923

16mm2 2 core TPS electrical cable.
Black outer insulation.
Copper conductor cores visible in cut section.
Cable is on a wooden spool.
Brand shown as MM Cables on the spool.
Cable marking specifies 16mm2 2C TPS.
46m remaining

Heavy Duty Mobile Table Workbench

Skylarc Ref M170246

Heavy Duty Mobile Table Workbench.
50x50mm box steel frame.
MDF top and lower boards.
100mm diameter castors for mobility.
Sturdy mobile unit.

Skope Upright Display Freezer

Skylarc Ref K171908

Model VF650X LT65GY
Unit model UF40ACD
Supply voltage 220-240V AC 50Hz
Rated current 7.5A for cabinet
Rated current 5.3A for unit
Defrost current 3.7A for cabinet
Defrost current 3.6A for unit
Trace heat input 193W
Refrigerant R404A
Refrigerant charge 700g
Year of manufacture 2019
Manufactured by Skope Industries Limited
Manufactured in New Zealand
Climatic class 5
Insulation blowing agent Cyclo-Isopentane
Serial numbers A190211150 and U190210625
Three adjustable wire shelves inside
Glass front door
Digital temperature display and control

Missing front cover

Timber Scaffolding Planks

Skylarc Ref U171606

Stack of 5 timber planks.

Visible grain and knots present on the timber.
Some planks have visible surface marks and

Lathe Live & Dead Centres w/ Tapered Shanks

Skylarc Ref W173662

Lathe Live & Dead Centres w/ Tapered Shanks.
2x live centees both with approx 36mm diameter turning cines and No.5 Tapered Shanks.
One dead centre with approx 32mm diameter cone and No.4 tapered shank.
One dead centre with spprox 35mm cone and No.4 tapered shank stuck into a No.4 to No.5 shank adapter.
Condition varies with each item. Both live centres turn by hand.

Steel Workbench with Timber Top and Shelf

Skylarc Ref E171772

Overall dimensions are 2030mm length by 900mm width by 1030mm height.
Steel frame construction with blue uprights and orange beams.
Fitted with a timber work surface on top.
Includes a lower timber shelf for storage.
Cross bracing on rear for added stability.
Bench has bolted footplates for floor mounting or stability.

Hitachi G 18MR 180mm Disc Grinder

Skylarc Ref J171543

Model G 18MR.
180mm disc grinder.
230V 50Hz 10A.
2400W power rating.
8500 revolutions per minute.
Includes side handle.
Includes disc guard.
Includes 180mm grinding disc installed.
Includes wrench.
Includes flange set.
Includes operating instructions manual.
Brand is Hitachi Koki.
Made in Malaysia.

Never been used. Was taken out of original box and assembled for the photos.

Nitchi 2000kg Electric Chain Hoist EC-3M

Skylarc Ref D172057

Nitchi 2000kg Electric Chain Hoist.
Model EC-3M.
6-metre Chain length
32A 3-phase plug.
3-ton capacity hook attached.
Very dirty from storage.
Operational condition is unknown.

Cebora MIG Weld 251C Welder

Skylarc Ref I173102

Cebora MIG Weld 251C Welder.
32A 3-pin 250V plug attached.
Includes attached Welding Cables.
Vendor tells us this unit is functioning.

Industrial Panel Suction Lifter Assembly

Skylarc Ref V170281

Industrial Panel Suction Lifter Assembly.
Unknown manufacturer.
2500mm length
Four 1000mm wide side bars with adjustsble suction cups. Cups 100mm diameter.
Single phase powered.
Operational condition unknown.

Steel Work Platform with Staircase and Safety Rails

Skylarc Ref I171516

Steel framed elevated work platform
Yellow mesh grating stairs and platform surface
Angled staircase with open grid steps
Stainless steel tubular handrails on both sides of the stairs
Safety rail surrounds on three sides of the platform
Bolt-down plates at the base of support legs
Support structure made from square and tubular steel
Platform height approx 2.2m high
Suitable for industrial or maintenance use

Supported by forklift in the photos and will require another leg or bolting to an existing structure to stand up.

Festool Corded Linear Sander LS 130 EQ

Skylarc Ref K173650

Festool Corded Linear Sander.
Model No.LS 130 EQ.
Includes non-original steel storage case.
Operates but not tested under load or at length.

In-Vision Ace Pro Industrial Electronic Video Scope

Skylarc Ref S173658

In-Vision Ace Pro Industrial Electronic Video Scope.
Includes tool, 1x 4.4Hh Li-Ion Battery, charger, aluminium carry case.
2-metre scope camera cable with LED lighting at tip.
User controlled remote tip movement is functioning.
Battery charges but its usage history is unknown.
Camera operates and can show a clear imagery but sometimes shows visual faults on screen depending on movement of the cable, see photos for samples.
Battery charger is starting to show cable damage, see photo.

5x Stainless Steel Butterfly Valves

Skylarc Ref A171118

5x Stainless Steel Butterfly Valves
316 grade stainless steel.
All are 105mm outer thread diameter, 85mm inner bore.
Blue rubber gasket seals.

20x BSP Type Thread Tapping Bits

Skylarc Ref H171151

20x BSP Type Thread Tapping Bits.
Sizes range up to 1".
Condition varies with each item.

Assorted Stainless Steel Pipe and Square Tube Lot

Skylarc Ref L171493

Assorted lot of stainless steel pipe and square tube.
Lot includes multiple round pipes of various diameters.
Lot includes several square tubes.
Material is bundled on a pallet with plastic strapping.
No additional fittings or accessories are included

John Deere Tow-Behind Broadcast Spreader

Skylarc Ref B171639

John Deere tow-behind broadcast spreader.
Green plastic hopper with John Deere logo.
Two pneumatic wheels with yellow centres.
Steel frame construction.
Hopper features an adjustable spread gate mechanism.
Handle mounted flow control lever.
Tow bar hitch for attachment to compatible vehicles.
Spreader system operates by axle drive.

600x Pairs of White Cotton Gloves, New Bulk Lot

Skylarc Ref V170255

600x Pairs of White Cotton Gloves.
Red wrist ring colour.
New Bulk lot in large manufacturer bale, see second photo. Photos of gloves on table are indicative.
See our other listings for more Bulk lots of these Gloves.

ER40 Collet Chuck Set 23 Piece Metric

Skylarc Ref V171789

ER40 collet chuck set
Shank size ER40
23 pieces included
Metric sizes
Collets are individually slotted
Some collets are wrapped in plastic
Supplied in fitted carrying case
Made in Taiwan

Jetfire DC30 Direct Fire Industrial Heater

Skylarc Ref Z168356

Jetfire DC30 Direct Fire Industrial Heater.
Uses diesel or kerosene.
30kW output.
Unit has had its cover removed as most bolts are missing. One side panel is also missing. Rear fan cover is detached. Unknown if unit is operational.

Steel Workbench with Bins and Record No. 6 Vice

Skylarc Ref K171752

Steel workbench with solid metal frame
Fitted wooden boards on top
Raised shelf supported by three metal uprights
Four metal storage bins below main surface
Lower shelf runs the length of the bench
Record No. 6 bench vice mounted at one end
Side panel features outline tool storage markings

Vintage Diesel Compression Tester Kit by Churchill

Skylarc Ref G171176

Vintage Diesel Compression Tester Kit by Churchill.
Made in England.
Model 6000C-8
Wood case 355x245x60mm.
See photos for included parts and components.
Case exterior shows heavy workshop storage wear.

Trio 20MHz Oscilloscope CS-1022

Skylarc Ref E173618

Trio 20MHz Oscilloscope CS-1022.
Made in Japan by Trio Kenwood Corp.
Age unknown.
Measures 435x255x170mm.
Single phase.
Includes padded wood case.

GT Power Professionsl Generator GT6500

Skylarc Ref M170324

GT Power Professionsl Generator.
Model No. GT6500.
Max output 6500W
Rated output 5000W.
13hp petrol engine.
Electric start.
Generator will not start.
All tyres are flat.

Pair of Steel Sawhorses

Skylarc Ref N170325

Pair of Steel Sawhorses.
Made from welded 125x70x8mm angle steel.
Top lengths are 1000x125mm.
500mm wide feet.
750mm heights.
Heavy Duty sturdy units.

Enerpac RC50 Hydraulic Cylinder

Skylarc Ref L171623

Enerpac RC50 Hydraulic Cylinder.
16mm stroke.
4.9-ton capacity.
41mm minimum height.
Includes an extra connector unit and spare caps.
https://www.enerpac.com/en-us/rc-series-cylinders/general-purpose-cylinder/RC50?srsltid=AfmBOoq3acdDlFNhD1jxUwCkgvEcH3i_gaixTvP47cBz1TbkE6LMuNFi

Endecotts Laboratory Test Sieves

Skylarc Ref C171614

Laboratory test sieves manufactured by Endecotts Ltd.
Model conforms to BS410 1986 standard.
Frame material is brass.
Mesh material is stainless steel.
One sieve has an aperture of 850 micrometres.
One sieve has an aperture of 150 micrometres.
Patent number 667924 is noted on the label.
Manufactured in London England.
Serial numbers visible include 398440 and 700912.

FFM TourPro II Motorcycle Helmet, Size XL

Skylarc Ref Y171636

Colour

Black

Size

XL

Brand

FFM

FFM TourPro II Motorcycle Helmet.
Size XL.
Model No.FF311
Includes soft pouch bag.
Helmet shows very little signs of use.

2x AmPro Portable Engine Air Cleaning Guns, New

Skylarc Ref M173652

2x AmPro Portable Engine Air Cleaning Guns.
Both are Part No.A1449.
Both tools are new never used in boxes, opened for photos only.
Both boxes show exterior workshop storage wear.

Lifeguard LG6.4PSOA 4-outlet 10A Power Block

Skylarc Ref E171746

Lifeguard LG6.4PSOA 4-outlet Power Block.
Model number LG6.4PSOA10W.
230V AC power block.
Frequency 50 or 60Hz.
Four single phase outlets.
All four outlets are rated at 10A 250V.
Each socket is an ABL SURSUM auto switched socket outlet part number 310 D 066.
Device includes integrated residual current device (RCD) 30mA sensitivity.
Rated overload current 10A.
Rated wattage 2300W.
Class H to AS/NZS3190 standard.
IP65 rated for protection against dust and water.
Manufactured by Jackson Electrical Industries Ltd.
Made in accordance with AS/NZS3012 and AS/NZS3190.

Goldacres ATV75 Spray Tank Unit

Skylarc Ref J171881

Goldacres ATV75 spray tank unit
Fitted with pressure gauge
Includes adjustable pressure regulator
Equipped with electric pump
75 litre capacity tank
Spray wand and lance with trigger handle included
Flexible hose attached
Quick connect hose fitting present
Large black screw cap for tank access
Safety and chemical handling instructions shown on tank
Serial number on tank: ATV752013019
Green plastic tank body

14x Assorted Steel Cable Lifting Slings

Skylarc Ref H172087

14x Assorted Steel Cable Lifting Slings.
All are made from 20mm diameter cable.
Cable steel grade unknown.
Lengths include:
- 3x 1-metre
- 2x 1.2-metre
- 1x 1.3-metre
- 2x 1.4-metre
- 4x 2.4-metre
- 2x 5.5-metre
- 1x bare 4.6-metre cable with no looped ends.

33x Assorted Straight Shank Drills

Skylarc Ref M171156

33x Assorted Straight Shank Drills.
Metric and Imperial sizes up to 1 1/16".
Condition varies greatly with each drill.

Mixed Steel Pipe and Box Section Offcuts

Skylarc Ref E171486

Steel offcuts including round pipe and square box section
Mixed sizes and lengths
Material include both rusted and galvanised steel

Metric & Imperial Thread Tap Set

Skylarc Ref I171438

Metric and Imperial Thread Tap Set.
Unknown manufacturer.
Most taps appear used and dusty. There are more taps than storage slots so some are not original.
Steel case measures 485x320x46mm.
Steel case exterior shows workshop storage wear.

Makita JN1601 Nibbler

Skylarc Ref E168205

Model JN1601.
Rated for mild steel up to 1.6mm.
Rated for stainless steel up to 1.2mm.
230-240V input voltage.
2.4A current.
50-60Hz frequency.
550W power consumption.
No load speed 2200 per minute.
Makita Corporation Anjo Aichi Japan.
Made in Japan.

20 Pallet Racking Mesh Shelves

Skylarc Ref B171769

Lot includes 20 pallet racking mesh shelves
Suitable for pallet racking systems

Tap & Die Set, Metric & Imperial Types

Skylarc Ref I171178

Tap & Die Set, Metric & Imperial Types.
Steel case measures 285x250x32mm.
Condition varies with each piece.

Makita BTW450 18V Cordless Impact Wrench

Skylarc Ref X172181

Makita model BTW450 cordless impact wrench
18V power rating
Compatible with Makita 18V battery packs
Speed range 1600 min⁻¹ to 2200 min⁻¹
Makita Corporation Anjo Aichi Japan
Made in Japan
Black and blue plastic and metal construction
Square drive anvil
No battery included
No charger included

Miller Syncrowave 250 Arc Welding Power Source, Faulty

Skylarc Ref U173608

Miller Syncrowave 250 Arc Welding Power Source.
NOTE that this unit is faulty, power cord has been cut off for safety. Parts usage only or scrap.

Zipp Hammer Chisel w/ Needle Scaler Attachment

Skylarc Ref H173673

Zipp Air Hammer Chisel w/ Needle Scaler Attachment.
Model No.ZAH392.
Tool shows mild usage. Needle Scaler Attachment appears unused.

Assorted Hand Tools with Two Red Toolboxes

Skylarc Ref P171783

Includes two red metal toolboxes
Assorted screwdrivers
Assorted files with plastic and rubber handles are included
A variety of pliers and combination pliers
A set of socket wrenches and ratchet handles is included
Several spanners and adjustable wrenches are present
Cutting tools such as tin snips and utility cutters included

110 Piece Metric Tap and Die Set with Assorted Taps and Dies

Skylarc Ref R171785

110 piece metric tap and die set in blue metal case
Includes a range of round dies
Includes die stocks and tap wrenches
Box contains assorted additional taps and dies

Industrial Roller Door Assembly w/ Entry door cutout

Skylarc Ref W170282

Industrial Roller Door Assembly.
Door width approx 3100mm. Door height is unknown.
Manual hand chain driven operation.
Has cutout for invluded personnel entry door frame with door, both steel. Door width 790mm, height 1990mm. Frame width approx 900mm, height 2100mm.
Some bending to Personnel Door frame. Some holes in visible roller Door sections, see photos.

Adjustable Angle Milling Vice

Skylarc Ref L170271

Adjustable Angle Milling Vice.
Unknown brand.
150mm wide jaws.
Circular base 230mm diameter.

Weldtech PROARC1600 140A Inverter ARC TIG Welder

Skylarc Ref P171809

Weldtech PROARC1600 inverter arc and TIG welder
140A output
IGBT technology
Front panel dial for amperage adjustment
Includes electrode holder lead
Includes earth clamp lead
Fitted with three pin plug
Carries strap attached to the welder body

OAV SW-1404 Woodworking Bandsaw

Skylarc Ref F171877

Model SW-1404
Motor rated at 3/4 horsepower
Single phase 230 volt power supply
50 Hz cycle
Manufactured by OAV Woodworking Machines
Made in Taiwan
Manufacture date August 1983
Serial number 390765
Fixed base with open cabinet storage
Steel table with slot and guide
Table marked WOOD CUTTING
Blade guide adjustment apparatus
Includes attached power cable with standard plug

Iscar Indexable Lathe Grooving Tool GEHIR 16-14-2-T2.6

Skylarc Ref Q170302

Iscar Indexable Lathe Grooving Tool GEHIR 16-14-2-T2.6.
125mm length.
Includes Torx key and plastic case.

160mm Milling Vice

Skylarc Ref J170269

Milling vice with 160mm wide jaws.
Opens to approx 120mm.
Unknown manufacturer.
Mounting bolt slots spaced approx 350mm and 160mm.
Includes removable crank.

Vintage Caterpillar Tetra Gauge Diesel Service Tool

Skylarc Ref C171198

Vintage Caterpillar Tetra Gauge Diesel Service Tool.
210mm diameter tool housing.
Age and operational condition of tool is unknown.
One gauge has cracked cover glass.

BOC SmoothArc Advance II MIG 400R Welder, Faulty, Parts Only

Skylarc Ref K173104

BOC SmoothArc Advance II MIG 400R Welder.
3-phase.
NOTE that this unit is faulty, power cord has been cut for safety, parts usage or scrap only.

EDL Fasteners Rivets Assortment Case

Skylarc Ref V171451

EDL Fasteners assortment case included
Case contains multiple compartments
Assortment includes aluminium rivets
Labelled compartments for various types and sizes
Listed sizes include 73 AS 4-2 Rivets code 73AS42RP qty 400
73 AS 5-2 Rivets code 73AS52RP qty 300
73 AS 6-2 Rivets code 73AS62RP qty 200
73 AS 4-4 Rivets code 73AS44RP qty 400
73 AS 5-4 Rivets code 73AS54RP qty 300
73 AS 6-4 Rivets code 73AS64RP qty 200
73 AS 4-6 Rivets code 73AS46RP qty 400
73 AS 5-6 Rivets code 73AS56RP qty 300
73 AS 6-6 Rivets code 73AS66RP qty 200
73 ASL 4-4 Large Flange Rivets code 73ASL44RP qty 400
73 ASL 5-4 Large Flange Rivets code 73ASL54RP qty 300
73 ASL 6-6 Large Flange Rivets code 73ASL66RP qty 200
Grey metal case with latch closure
Contents appear partially used
Case is labelled with EDL branding

Iscar Indexable Grooving Tool GHIR 20-20-4

Skylarc Ref J170295

Iscar Indexable Grooving Tool GHIR 20-20-4
200mm length.
As new with Torx key tool and plastic case.

Hydraulic Hand Pump

Skylarc Ref Z171195

Hydraulic Hand Pump.
Manufacturer a d model details unknown.
Cylinder approx 500mm long.

CPS Pro-Set VP6D 2-Stage Vacuum Pump 240V

Skylarc Ref X171869

CPS Pro-Set 2-stage vacuum pump.
Model number VP6D.
Power source 240V AC 50Hz only.
Rated at 148 litres per minute.
Comes with standard NZ/AU 3-pin power plug.
Oil sight glass present for oil level inspection.
Equipped with handle for transport.
Label indicates equipment suitable for refrigeration applications.

42x Metric Type Thread Tapping Bits

Skylarc Ref J171153

42x Metric Type Thread Tapping Bits.
Sizes range up to 24mm.
Condition varies greatly with each unit.

Miller Dialarc HF CY50 Arc Welding Power Source, Faulty, Parts only

Skylarc Ref S173606

Miller Dialarc HF CY50 Arc Welding Power Source.
NOTE that this unit is faulty, power cord has been removed for safety. Parts usage or scrap only.

TengTools Red Metal Tool Chest

Skylarc Ref X171453

TengTools brand metal tool chest
Red color with TengTools logo and graphic on front
Top lid opens upward with supporting arms
Five drawers of varying sizes
Metal side handles on both sides
Drawers have foam lining
Comes with two keys
Contents shown in drawers include assorted welding tips and spare parts
Contents in drawers as pictured are included
Rocol J166 copper anti-seize compound tube present in one drawer
Main structure is metal
Locking mechanism on front with keyhole

Plate Clamp with D-Shackle & Wrench

Skylarc Ref J171127

Plate Clamp with D-Shackle & Wrench.
Lifting capacity of clamp is unknown.
Material gap slot 30mm wide, 79mm deep.
30mm diameter threaded tightening bolt with 660mm long tightening wrench.
Includes attached D-shackle with no visible capacity markings, 18mm diameter Shackle steel.

Pallet of Fastening Hardware, Bolts, Nuts, Washers, & More

Skylarc Ref G171696

Pallet of Fastening Hardware, Bolts, Nuts, Washers, & More.
A mix of Galvanized, zine coated, stainless, and other metal varieties. Thousands of units on pallet.
Most appear unused stock, some others show rusting so may he used.

Iscar Indexable Grooving Tool GHIR 25-25-4

Skylarc Ref H170293

Iscar Indexable Grooving Tool GHIR 25-25-4.
200mm length.
As new with Torx key tool and plastic case.

Iscar Indexable Grooving Tool GHIR 25-25-4

Skylarc Ref G170292

Iscar Indexable Grooving Tool GHIR 25-25-4.
200mm length.
As new with Torx key tool and plastic case.

Steel Wire Mesh Pallet Rack Shelves

Skylarc Ref G171774

Stack of steel wire mesh pallet rack shelves shown.
Material appears to be galvanized steel wire.
Each shelf has two metal reinforcement bars per panel.

Sunlight 150mm Adhesive & Grip Backed Sanding Disks

Skylarc Ref G173672

Sunlight 150mm Adhesive & Grip Backed Sanding Disks.
Includes:
2x 100-piece boxes of Part No.01308, 130-grit PSA Film adhesive backed disks.
- 1x 100-piece box of Part No.01410, 180-grit grip back disks.
- 4x 100-piece boxes of Part No.01406, 80-grit grip back disks.
- 5x 100-piece boxes of Part No.01408, 120-grit grip back disks.

All are as new unused. Counts within boxes not verified.

Tapmatic SM8 Tapping Attachment

Skylarc Ref U171788

Tapmatic SM8 tapping attachment.
Capacity M12-M30.
Capacity 1/2 inch to 1 1/8 inch.
Shank is square drive.
Markings indicate #11 on body.
Tapping tool is included in the attachment.

300mm 3-Jaw Lathe Chuck by Pratt Burnerd Int

Skylarc Ref V171113

300mm 3-Jaw Lathe Chuck by Pratt Burnerd International, England.
Cat No.1380 33121.
300mm outer diameter.
100mm inner bore.
100mm body thickness.
Chuck key not included.

Electric Concrete Mixer

Skylarc Ref Z171611

Electric powered concrete mixer
Orange steel frame
Rotating drum with hand wheel mechanism
Two solid wheels for portability
On off switch panel on motor housing
Power cable attached to motor housing
Significant rust and flaking paint present on drum and frame
Stuck in downward position

EDL Fasteners Metal Case with Assorted HWF Screws and Fasteners

Skylarc Ref U171450

EDL Fasteners metal case with latch and multiple compartments
Contains assorted hex head screws and fasteners
Includes HWF Self-Drillers and HWF Type 17 Screws with Neo washers
Multiple sizes present including 12-14 x 25 mm, 12-14 x 35 mm, 12-14 x 45 mm, 12-14 x 55 mm
Also contains 14-10 x 22 mm, 14-10 x 50 mm, 14-10 x 65 mm, 14-10 x 75 mm
Includes 12-11 x 25 mm, 12-11 x 40 mm, 12-11 x 50 mm, 12-11 x 65 mm
Contains 5/16 x 42 mm nutsetter for 12g screws and 3/8 x 45 mm hex nutsetter for 14G screws
Class 4 fasteners
Driver bits are included for nutsetters
Compartment quantities range from 50 to 100 units each depending on size
Grey painted steel case

Assorted Threading Dies

Skylarc Ref T171163

Assorted Threading Dies.
Various metric and UNF sizes.
Condition varies with each unit.

3M 5925 P2 R Particulate Filters

Skylarc Ref C171432

Brand 3M
Model 5925
Type P2 R particulate filters
Each box should contain 10 filters but has not been counted.
Compatible with certain 3M reusable respirators
Filters are sealed in individual plastic packaging
Meets EN 143:2000 P2 R standard
Meets AS/NZS 1716:2012 P2 standard

Boxes appear to be full but contents not counted

Assorted Clamps and Spring Clamps Collection

Skylarc Ref Q171446

Includes multiple G clamps in various sizes.
Record 119 G clamps visible in blue, sizes 2 inch and 4 inch.
Some G clamps labelled as MILTAN brand.
Grey G clamps feature 2 inch size marking.
Set includes several metal spring clamps.
General 3 inch and 2 1/2 inch spring clamps visible.
3 inch spring clamp marked as model 160892C.
2 1/2 inch spring clamp marked as model 160872B.
Some clamps show surface rust and marks.

Lincoln Electric Viking 3350 Welding Helmet and Bolle Face Shield

Skylarc Ref X171817

Lincoln Electric Viking 4C 3350 welding helmet included.
Welding helmet features lens technology.
Helmet has adjustable delay time, sensitivity, and shade controls.
Inside label provides shade guide settings for various types of welding and cutting operations.
Replacement parts for the Viking 3350 series are listed inside the helmet.
Helmet uses a replaceable lithium battery.
Bolle face shield included.
Bolle shield model complies with EN166 3 8 9 AT and AS/NZS 1337.1 standards.
Bolle shield features a clear visor with black plastic headpiece.
Both items designed for head and face protection during industrial applications.

Assorted Tie Down Straps and Lifting Slings

Skylarc Ref C171458

Lot of assorted tie down straps and lifting slings.
Includes three metal ratchet tie down straps with blue webbing and double J hooks.
Includes two rolled webbing straps with hooks.
Includes four green flat webbing slings.
One green webbing sling is labeled 5000KG.
Some webbing slings are wrapped in plastic film.
Includes one sling with visible manufacturer label listing test certificate details.

Metabo Corded Reciprocating Saw PSE 1200

Skylarc Ref D110031

Metabo Corded Reciprocating Saw.
Model No. PSE 1200.
Includes some spare blades and plastic case.

Stainless Steel and Aluminum Metal Assortment

Skylarc Ref M171442

Assortment of stainless steel tubes
Assortment of aluminum angle and flat bar

Air Rivet Gun

Skylarc Ref Z171741

Air Rivet Gun.
ID label is missing so manufacturer and model details unknown.
"3X" is marked on side.
Some surface rust spotting.

CEA Rainbow 180 Inverter Welder

Skylarc Ref X171531

CEA Rainbow 180 inverter welder
Type Rainbow 180
Single phase 230V operation
Current range 5A to 180A
Uo = 88V
Maximum output current 180A at 27V
Input frequency 50 60Hz
Cooling AF
Duty cycle at 20 percent is 180A
Duty cycle at 60 percent is 130A
Duty cycle at 100 percent is 104A
IP23S rating
Includes electrode holder with cable
Includes earth clamp with cable
Made in Italy

Stack of Wire Mesh Panels

Skylarc Ref H171775

Stack of wire Mesh Panels

R134a Manifold Gauge Set with Charging Hoses and Case

Skylarc Ref T171865

R134a manifold gauge set included.
Two pressure gauges present.
One blue low-pressure gauge and one red high-pressure gauge.
Three charging hoses included.
Hoses are color coded yellow red and blue.
Hoses marked R-134a Charging Hose.
Red plastic carry case included.
Manifold features control knobs and brass fittings.
Case has molded slots for storage.

Record No 5 vice on stand

Skylarc Ref C171484

Record No 5 vice on stand

vice has some fault which doesn't allow it to open using the handle

Large 660L Mobile Storage Wheelie Bin

Skylarc Ref P170275

Large 660L Mobile Storage Wheelie Bin.
Green plastic construction.
200mm Diameter wheels.
Side pins for lifting and tipping.
Hole in bottom for drainage

Iscar Indexable Lathe Grooving Tool GHIR 32C-610

Skylarc Ref L170297

Iscar Indexable Lathe Grooving Tool GHIR 32C-610.
200mm length.
Includes torx key and plastic case.
Assorted new unused. Case exterior shows workshop storage wear.

Iscar Indexable Lathe Grooving Tool GHIR 32C-610

Skylarc Ref M170298

Iscar Indexable Lathe Grooving Tool GHIR 32C-610.
200mm length.
Includes torx key and plastic case.
Assorted new unused. Case exterior shows workshop storage wear.

Iscar Indexable Lathe Grooving Tool GHIR 32-4

Skylarc Ref O170300

Iscar Indexable Lathe Grooving Tool GHIR 32-4.
250mm length.
Includes Torx key tool and plastic case.
As new unused, case exterior shows workshop storage wear.

R406A Refrigerant Cylinder 25lb 11.3kg

Skylarc Ref Y171870

R406A refrigerant cylinder
Net weight 25lb 11.3kg
Non-flammable liquified gas
Contains chlorodifluoromethane CAS 75-45-6
Contains chlorodifluoroethane CAS 75-68-3
Contains isobutane CAS 75-28-5
For professional use only
Non-refillable disposable cylinder
To operate connect charging hose to valve
S.P./T.P.: 2.1/2.7MPa
Container feels Full

Assorted Drills, Threading Taps & Dies, & More

Skylarc Ref W171634

Assorted Drills, Threading Taps & Dies, & More.
Various items in varying levels of condition, see photos.

SIDI Vertigo Motorcycle Boots, Size 9 UK

Skylarc Ref Z171637

Brand

Sidi

SIDI Vertigo Motorcycle Boots..
Size 9UK, 9.5 US, 43 EU, 27 JP.
300mm boot height.
Boots are very clean and show very light signs of use.

17x Large Galvanized Turnbuckles

Skylarc Ref Z171715

17x Large Galvanized Turnbuckles.
45mm thread diameter
Body 410mm long, 67mm diameter.
Some have D-shackles attached.

Campbell Hausfeld Air Cut-off Tools & Die Grinder

Skylarc Ref W171738

Campbell Hausfeld Air Cut-off Tools & Die Grinder.
Includes:
- 2x Air Cut-off Tolls, both Model No.TL1135.
- 1x Air Die Grinder Model No.PL154199

All are untested.

Assorted Industrial Hardware and Workshop Parts in Boxes

Skylarc Ref D171459

***CRATE NOT INCLUDED***
Lot contains mixed industrial hardware and workshop parts in cardboard boxes.
Contents include nuts, bolts, screws and fasteners in plastic trays.
Multiple pressure gauges are visible in the selection.
Several rolls of abrasive sanding belts are present.
Boxes include a range of hose fittings and connectors.
Visible wire brush and small hand tools in trays.
Various electrical and mechanical fittings are included.
Contains plastic oil container and miscellaneous metal parts.
Includes a yellow box labeled Tweco MIG Conduit.
Steel brackets and pipe sections can be seen among contents.
Included are a number of pressure regulators and valves.
Some automotive-style headlamps and cables included.

Assorted Stainless Turnbuckles, D-Shackles, Pulleys, & More

Skylarc Ref E172084

Assorted Stainless Turnbuckles, D-Shackles, Pulleys, & More.
Most items are stainless steel, a few others are non-stainless.
See photos for further details on included items.
Items appear unused but dusty from open box storage.

2x Lathe Treading Head Attachments

Skylarc Ref X173663

2x Lathe Treading Head Attachments.

One unit marked Mod Util A-3 with other markings including M20x2.0 and 7 16-3 4, marked Made in Spain, Serial number visible as 35025 on A-3 unit.

Second unit had no visible ID markings, 115mm diameter front face, 50mm inner bore.

Both units have multi-bolt flange mounting faces.
Thread dies visible inside both heads.
Spring-loaded mechanisms present on both.
External adjustment screws are present.
Mounting block bades with through holes for attachment measure 95x75mm with bolt hole spacings of 40mm and 70mm on centre.
See photos for further details on included items.

Ryobi GrindForce 6500 150mm Grinder Sander HBGL650

Skylarc Ref I110036

Ryobi GrindForce 6500 150mm grinder sander
Model HBGL650
Power rating is 1/2HP 375 watts
Voltage is 240V
Frequency is 50Hz
No load speed is 2850 RPM
Current draw is 1.95A
Grinding wheel size is 150mm x 20mm
Belt size is 50mm x 686mm
Includes integrated wheel dressing tool
Fitted with a lamp on a flexible stalk
On and off switch located on front panel
Coolant tray attached at front base

Assorted Electrical Building Wire Reels

Skylarc Ref A171456

Lot includes multiple reels of electrical building wire.
Reels contain different colours including red black white yellow and green.
Various wire types are visible including building wire and earth wire.
Labels show 1.5mm2 1C PAC HR PVC RED 1kV building wire.
Labels show 1.5mm2 1C PAC HR PVC BLK 1kV building wire.
Labels show 2.5mm2 1C PAC HR PVC RED 1kV building wire.
Labels show 2.5mm2 1C PAC HR PVC ALUMINUM 1kV earth wire.
Labels show 16mm2 1C PAC PVC WHI 1kV building wire.
Some spools are plastic and some are cardboard.

600x Pairs of White Cotton Gloves, New Bulk Lot

Skylarc Ref U170254

600x Pairs of White Cotton Gloves.
Red wrist ring colour.
New Bulk lot.
See our other listings for more Bulk lots of these Gloves.

UNImig 172 Single Phase Welder

Skylarc Ref I170320

UNImig 172 Single Phase Welder.
Casing measures approx 480x280x430mm.
Plug cord pulling loose at plug, see photo.

40+ Large Galvanised Turnbuckles

Skylarc Ref C171666

40+ Large Galvanised Turnbuckles.
Auction is for all 40+ units on pallet.
All are of the same size.
Threaded Rods 37mm diameter.
Body length 410mm, diameter 59mm.
Total length when fully closed 770mm.
Max weight load capacity is unknown.
Some units have D-shackles attached to one end.
Total count is an estimation.

Ponstar PX-55022 Submersible Pump

Skylarc Ref L171909

Model PX-55022
Type PX-55022-BAA-2
Submersible pump
Connection diameter 50mm 2 inch
Maximum head 10m 32ft
Maximum delivery rate 260 litres per minute 4120 gallons per hour
Rated output 620W
Rated current 3.2A
Voltage 240V
Frequency 50Hz
Serial number 151110053
Koshin manufacturer
Power cable with plug attached

EDL Surefix Wood Screw Assortment Case Zinc Chromate

Skylarc Ref T171449

Assortment case of EDL Surefix wood screws.
Screws are zinc chromate coated.
Case contains 18 compartments with various screw sizes.
Sizes include 6g x 5/8 inch, 6g x 3/4 inch, 6g x 1 inch, 6g x 1 1/4 inch, 8g x 3/4 inch, 8g x 1 inch, 8g x 1 1/8 inch, 8g x 1 1/4 inch, 8g x 1 1/2 inch, 8g x 1 3/4 inch, 8g x 2 inch, 8g x 2 1/2 inch, 8g x 3 inch, 10g x 2 1/2 inch, and 10g x 3 inch, 10g x 4 inch.
Screws are countersunk square drive.
Label indicates original quantities of 50 or 200 per size as specified on the case lid.
Metal storage case with closing latch.
Product codes and quantities for each size are listed on the inside lid.
Reorder code for case: ASSML1.
Actual quantities may differ from original specified amounts.

Garrick Universal Plate Clamp, 2-Ton Capacity

Skylarc Ref R173631

Garrick Universal Plate Clamp.
2-ton capacity.
25mm jaw opening.
Not tested under load.

Dawn 150mm Bench Vice

Skylarc Ref X173637

Dawn 150mm Bench Vice.
500mm length when closed.
Non-swivel base.

7x 120VDC, 9Ah Battery Modules by APC

Skylarc Ref Z171117

7x 120VDC, 9Ah Battery Modules by APC.
All are Model SYBT5.
For use with APC Symmetra LX System.
Each module is approx 576x165x135mm.
Sealed non-spillable Lead acid battery type.
Some casing show moderate rusting. Operational condition of units unknown.

Juki MO-2516N Industrial Overlocker Sewing Machine

Skylarc Ref I110114

Juki MO-2516N industrial overlocker sewing machine
MO 2500 series
Class FF6-500
Made in Japan
Includes metal workstation table
Thread stand with four positions
Integrated lamp attached to workstation
New Zealand 3-pin power plug
Foot pedal included
Operator controls and adjustment knobs visible on machine
Label shows serial number 1074
Power cord shown in included images

Makita BTW251 18V Impact Wrench

Skylarc Ref Y172182

Makita model BTW251 impact wrench
18V cordless tool
No battery included
No charger included
Made by Makita Corporation Anjo Aichi Japan
Rated at 0-2100 min⁻¹
Label indicates manufacture year 2007
Square drive chuck
Black and teal plastic body
Tool belt clip attached to base
Made in Japan

LiquidAtc EasyMIG 220 Welder

Skylarc Ref H173101

LiquidAtc EasyMIG 220 Welder.
Single phase 16A plug.
Includes attached Welding Cables.
Vendor states this unit is operational.

Iscar Indexable Lathe Grooving Tool GHIR 25C-510

Skylarc Ref R170303

Iscar Indexable Lathe Grooving Tool GHIR 25C-510.
260mm long.
Includes Torx key and plastic case.

Makita GA9020 230mm Angle Grinder

Skylarc Ref Q171550

Makita GA9020 angle grinder.
Disc diameter 230mm.
Voltage 230-240V.
Frequency 50-60Hz.
Power input 2200W.
No load speed 6600min⁻¹.
Current 9.6A.
Side handle attached.
Made in China.
Makita Corporation model.
Rubber grip handle.
Includes grinding disc fitted.

3-Phase Industrial Grinder by Lyttelton Engineering

Skylarc Ref N171105

3-Phase Industrial Grinder by Lyttelton Engineering.
Model No.G9
32A 4-,pin plug.
400mm diameter, 50mm wide grinding wheels installed.
Older well used unit.

Industrial Hydraulic Tank w/ Single Phase Motor Pump

Skylarc Ref H171619

Industrial Hydraulic Tank w/ Single Phase Motor Pump.
CMG branded 2.2kW single phase pump motor.
Tank size approx 600x450x350mm.
Includes heavy steel support frame.
Unit is untested. Appears to have been stored outdoors for some time. Motor housing very rusty.

Air Rivet Gun

Skylarc Ref O110042

Air Rivet Gun.
Unknown brand/model.
See photos for design/type details.

Modular Metal Shelving System

Skylarc Ref C171770

Modular metal shelving system comprised of multiple sections.
Sections include vertical uprights and horizontal shelves.
Shelves are made of metal and finished in a light colour.
Each section contains three or four adjustable height shelves.
Flat pack metal shelves and fasteners included.
Components include frame posts and shelf panels.
Shelves and supports are bolted together with included fixings.
System designed for floor standing use.
Suitable for warehouse or workshop storage.
3 bays are 2700mm long
2 bays are 1800mm long
1 bays is 900mm long

470-140315M Lathe Boring Bar

Skylarc Ref K171856

Model 470-140315M is marked on the tool.
This is a lathe boring bar.
Overall shape is cylindrical with one flat side.
One end features a mounting flat with a threaded hole and alignment pin.

Heavy Duty Platform Trolley

Skylarc Ref Q171186

Heavy Duty Platform Trolley.
Small but sturdy little tralloey with 50x50mm galvanized angle steel frame, thick wood boardsurface, 120mm diameter castors.

Nitchi EC-3M Electric Chain Hoist

Skylarc Ref K171518

Brand: Nitchi
Model: EC-3M
Type: Electric chain hoist
Duty rating: 30 min
Lift capacity: 2000 kg
Lift height: 6 m
Voltage: 400V
Phase: 3
Cycles: 50 Hz
Rated current: 2.7A
Motor output: 1.3 kW
Insulation class: B
Number of poles: 4
Control pendant with up and down buttons included
Made in Japan by Nitchi Co. Ltd

500mm Digital Vernier Caliper & Mitutoyo 25-50mm Micrometer

Skylarc Ref A170260

Auction includes:
- Unknown brand 500mm Digital Vernier Caliper in wood case. Large section of scale bar is missing numbering, see photos. Battery is depleted so unable to test Digital unit. Battery compartment is clean.
- Mitutoyo 25-50mm Micrometer Code No. 103-138 with pladtic case. Note that gauge cylinder is missing end cap, see photos.

Both units have very dirty case exteriors.

600x Pairs of White Cotton Gloves, New Bulk Lot

Skylarc Ref W170256

600x Pairs of White Cotton Gloves.
Red wrist ring colour.
New Bulk lot in large manufacturer bale, see second photo. Photos of Gloves on table are indicative.
See our other listings for more Bulk lots of these Gloves.

Miller Welding Heavy Duty Foot Pedal Controller RFC-14

Skylarc Ref F172085

Miller Welding Heavy Duty Foot Pedal Controller.
Model No.RFC-14
see photos for connecting plug pin design.
Some rust spotting on housing.

PDL Industrial Switchgear and Power Distribution Parts Lot

Skylarc Ref F171825

Lot includes multiple PDL 32A 500V three phase IP66 industrial sockets and switches.
Includes enclosure with rotary selector switch labeled for night mode and auto power off.
Various three phase power outlets and isolators present.
Selection of orange industrial isolator switches included.
Lot contains loose electrical fittings and wires.
Includes two orange industrial connectors with transparent housings.
Some parts show wiring and internal modules.
Lot supplied in plastic container.
Brands visible: PDL.
Components are industrial electrical parts.
Cat numbers listed include 56 50 431 and 56 50 432.

Cigweld Electrode Drying Oven

Skylarc Ref Y171610

Cigweld brand electrode drying oven
Blue metal exterior enclosure
Four internal metal shelving trays
Front door with external latch and handle
Temperature control dial with range from 0 to 300°C
Power indicator light on front panel
Internal heating element visible at rear
Some welding electrodes currently present inside

Blue Retractable Air Hose Reel

Skylarc Ref V172179

Steel construction blue retractable hose reel
Fitted with blue reinforced air hose
Wall or ceiling mounting bracket attached
Mounting bracket includes bolts and nuts
Brass hose end fittings visible
Caution label present on the reel body
Manual rewind configuration
Hose length not specified
Hose diameter not specified
Hose has a protective sleeve at the connection point
Reel has surface rust on mounting bracket
Suitable for workshop or industrial compressed air use

4x 5kg cases of Welding Electrodes, 350mm lengths

Skylarc Ref T173139

4x 5kg cases of Welding Electrodes.
All are 350mm length, 3.2mm diameter.
All Manufactured by Golden Bridge brand in 2022.
Includes 2x cases of Part No.JQ-E7018-1
Includes 2x cases of Part No.J506IE7016.
All are new in sealed cases.

3x Morse Taper Shank Adapters

Skylarc Ref V170307

3x Morse Taper Shank Adapters.
All are No.5 to No.3 type.

Steel Workbench with Shelving and Record No 6 Vice

Skylarc Ref S171760

Steel frame workbench with plywood side and back panels
Top surface appears to be a laminated or coated board
Bench includes integrated shelf above worktop
Lower section has shelving and storage compartments
Equipped with a Record No 6 metalworking bench vice
Bench has rectangular storage cubicles under worktop
All structural components are either steel or plywood

Assorted Electrical Extension Leads and Power Distribution Box

Skylarc Ref Z171429

Includes multiple electrical extension leads of various lengths and colors

ALL UNTESTED OR INSPECTED. SOME HAVE PLUGS CUT FROM ENDS AND MAY HAVE BEEN DEEMED UNSAFE OR FAULTY BY THE PREVIOUS OWNER.


Some leads have heavy duty connectors including 3-phase and single-phase plugs
Several leads have damaged or exposed wiring at the ends
Set includes a Lifeguard LG4 power distribution box
Lifeguard LG4 box is yellow plastic with four protected power outlets
Lifeguard LG4 rated 415V 50A
Box serial is 05427-07
Some power leads have portable outlet boxes attached
Contains a mixture of IEC60309 and Australian/New Zealand plug types
Some leads are black rubber insulated
Some leads are orange or white plastic insulated
Lengths of cables are not measured
Some plugs and outlets show signs of wear

6x Bow Shackles, 8.5-ton Capacity

Skylarc Ref I171698

6x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter blue painted pins.
6x Shackles in this auction.
See our other listings for more lots of these Shackles.

Makita 4110C Power Cutter

Skylarc Ref R171551

Makita 4110C power cutter
255mm blade diameter
240V power input
10A current
2300W power rating
50-60Hz frequency
No load speed 3500rpm
Manufactured by Makita Corporation Japan
Electric corded model
Equipped with protective blade guard
Side and top handles for operation

Stainless Steel Dual Chamber Industrial Tank

Skylarc Ref L171883

Stainless steel dual chamber construction.
Two cylindrical vessels mounted side by side on a steel frame.
Each chamber equipped with input and output ports.
Manual lever-style clamps for chamber access.
Butterfly valve fitted to output on one chamber.
Electrical hazard warning on the center panel.
Chambers secured with quick release stainless steel latches.
Apparent use for mixing or processing industrial liquids or food products.

Metabo WE 14-125 Quick Angle Grinder

Skylarc Ref R171525

Model Metabo WE 14-125 Quick
Power supply 240V 50 or 60 Hz
Power consumption 1450W
Current 6.9A
Maximum speed 10500 rpm
Disc diameter maximum 125mm
Spindle thread M14
Made in Germany
Side handle included
Protective guard included
Label shows manufacturing year 2011

Pair of Horizontal Steel Pressure Tanks

Skylarc Ref D171771

Two horizontal steel pressure tanks included
Tanks have welded end caps
Mounted on steel base supports
Each tank has multiple threaded pipe fittings
Manual valve and pipework attached to one tank

Horn Grooving Toolholder 228.0050.0348 w/ Inserts

Skylarc Ref D170289

Horn Grooving Toolholder 228.0050.0348 is shown.
Made in Germany.
Horn manufacturer number 2666863.
The body is marked 228.0050.0348.
250mm long, 50mm diameter.
Appears as new unused but missing plastic case.
Also includes 8x extra new inserts Part No. 231.7512.4324 MG 12

6x Stainless Steel Butterfly Valves

Skylarc Ref B171119

6x Stainless Steel Butterfly Valves.
All are 316 grade stainless steel.
2x are 80mm outer thread diameter, 52mm inner bore.
4x are 105mm outer thread diameter, 85mm inner bore.
Two larger valves have had their handles cut off, see photos.
One smaller valve is missing a blue rubber gasket.

Vacmobile Infusion 20/2 Mobile Vacuum System

Skylarc Ref X172077

Vacmobile Infusion 20/2 Mobile Vacuum System.
Vacuum pump model PVR EM20/B.
Pump capacity 18 m3/h.
Ultimate vacuum 10 mbar.
Supply voltage 230V +/- 10 percent.
Frequency 50 or 60 Hz.
Rated current 3.7 or 4.5A.
Power rating 0.55 or 0.66kW.
Designed and manufactured by VABS Limited, New Zealand.
Year of pump manufacture 2008.
Includes attached vacuum lines as shown.
Any original attachments or accessories are missing.
Instructional CD included.
Mounted on a wheeled base for mobility.
Dirty exterior.

Maxim Steel Storage Cabinet

Skylarc Ref C172056

Maxim Steel Storage Cabinet.
Lockable, key is missing.
Adjustable inner shelves.
Some exterior denting, scratches from Workshop office usage. Would benefit from a cleanup.

Iscar Indexable Lathe Grooving Tool GHIR 25C-510

Skylarc Ref S170304

Iscar Indexable Lathe Grooving Tool GHIR 25C-510.
160mm length.
Includes Torx key and case.
Tool shows some very light marks, may have had breif usage? Case shows workshop storage wear.

Sew Eurodrive Motor & Gearbox

Skylarc Ref L165456

See photos for specification plates.

SCA 12000kg Shop Press

Skylarc Ref E171876

Brand: SCA
Model: 12000KG Shop Press
Working load limit: 12000kg
Manual hydraulic operation
Includes two black press plates
Includes two-piece bearing separator
Quality assured
Made in China
Press platform has multiple adjustment holes for height
Red metal frame construction
Bottle jack mechanism included
Spring return system
Warning and operation label present on upper frame

6x Bow Shackles, 8.5-ton Capacity

Skylarc Ref J171699

6x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter blue painted pins.
6x Shackles in this auction.
See our other listings for more lots of these Shackles.

155mm Milling Vice

Skylarc Ref I170268

Milling Vice, unknown manufacturer.
155mm wide jaws.
Opens to approx 150mm.
Mounting bolt slots spaced approx 350mm and 190mm apart.
See photos for design details.

Hytsu 2500kg Pallet Trolley

Skylarc Ref Q170250

Hytsu 2500kg Pallet Trolley.
60mm minimum height, 160mm max height.
1145mm fork length.
150mm fork width.
225mm gap between forks..
Very dirty surfaces but appears to function normally.

1-Ton Girder Clamp by PWB Anchor

Skylarc Ref H171125

1-Ton Girder Clamp by PWB Anchor.
Beam range 75mm to 220mm.
Includes attached 4.75 ton capacity D-Shackle.

Miller Auto Invision II Robot Power Source

Skylarc Ref W173610

Miller Auto Invision II Robot Power Source.
Pendant controller is missing.
Vendor states unit as operational though no power cord is installed at rear.

DeWalt 125mm Corded Angle Grinder DWE4151

Skylarc Ref J168054

DeWalt 125mm Corded Angle Grinder.
Model No. DWE4151
Includes side handle and original box.
Disk changing tool is missing.
Tool had been electrical tested but appears never actually used.

5x Packs of Stainless Steel Welding Electrodes, 350mm lengths

Skylarc Ref X173143

5x Packs of Stainless Steel Welding Electrodes.
Manufactured by Golden Bridge.
Manufactured in 2022.
All are 350mm long, 3.2mm diameter.
All cases are labeled 2.5kg weight.
Includes 1x Part No.A002IE308L-16, current 70-130(A).
Includes 2x Part No.A042IE309LMo-16, current 70-130(A).
Includes 1x Part No.A022IE316L-16, current 70-130(A).
Includes 1x case of Part No.JQ-S2209, current 90-120(A).
All are new in sealed plastic cases.

Tradie Roofers Safety Kit by B-Safe

Skylarc Ref Y170284

Tradie Roofers Safety Kit by B-Safe.
Kit No.BK0612q5TRAD
Kit includes:
- Fall arrest harness, Expiry date of 01/2026.
- 15-metre rope safety line, manufactured 01/2016.
- 2x tear Webbing shock absorbers, Expiry dates of 03/2026
- 2x carabiners
- canvas backpack.

Kit appears unused. Backpack exterior shows dirt and wear from storage.

Walker MFG Company Mower Deck

Skylarc Ref N171885

Manufactured by Walker MFG Company.
Serial number D-734336.
Made in Fort Collins, Colorado, USA.
Yellow metal mower deck.
Plastic grass chute attached.
Three wheels mounted for mobility.
Multiple adjustment levers present.
Label includes identifier 5858.

200mm 3 Jaw Gear Puller

Skylarc Ref U171814

3 jaw gear puller
Maximum reach 200mm
Marking indicates 8 inch size
Metal construction
Central drive screw with hexagonal head
Arms are adjustable and pivoting
Suitable for removing gears or bearings

Assorted Industrial Gearboxes Motors and Pump Assembly Lot

Skylarc Ref G167531

Lot includes multiple industrial gearboxes
Electric motors are attached to some units
One blue gearbox housing with flange mount is present
One green electric motor and gearbox assembly
One SEW motor and gearbox combination is included
One blue gearbox with planetary gearing visible
One orange cast iron pump housing branded INDENG
One assembly with blue painted rectangular cover and exposed gear wheel
One stainless steel pump with electric motor attached

Kemppi Beta 90X Welding Helmet

Skylarc Ref Z171507

Kemppi Beta 90X welding helmet
Auto-darkening filter included
Auto-darkening unit model Kemppi V913 DS
Adjustable sensitivity
Adjustable delay
Adjustable shade level 9 to 13
Flip-front lens design
Side adjustment knobs
Black and orange plastic shell
Headband with adjustable ratchet
CE and EN379 markings visible on filter unit

100-metre Single Core Electrical Building Wire

Skylarc Ref D171693

100-metre Single Core Electrical Building Wire.
16mm² 1C PAC PVC WH 1kV
Item No.10220199
Manufactured by General Cable.
Assorted new unused 100-metre roll but is very dirty on outer surfaces from long term and partualy outdoor exposed storage.

Atlantic Flux Cored Wire for Mild Steel, 1.2mm, 2x Rolls

Skylarc Ref L172091

Atlantic Flux Cored Wire for Mild Steel.
2x Rolls in this auction.
Both are Item No.CHT711
AWS A5.20 E71T-1C
1.2mm each.
15kg weight each.
290mm diameter spools.
Wire Spools are new in vacuum packaging but NOTE that both vacuum bags have holes in them and are no longer vacuum sealed as a result. One included Box shows heavy workshop storage wear. Second roll has no box.

Large Vintage Copper Laundry Wash Tub

Skylarc Ref U171918

Luandry Wash tub constructed from Copper
Tub has a flared rim and cylindrical sides
Cooper Tub patinated with areas of verdigris
No visible markings or manufacturer’s details

Galvanised Steel Storage Rack Frame

Skylarc Ref F171773

Galvanised steel construction.
Rectangular base with slatted bottom supports.
Vertical side supports connected at top by horizontal bars.
Open front and rear design.
Four ground contact points with flat plate feet.

Ullrich Aluminium Platform Ladder

Skylarc Ref Q171602

Ullrich brand aluminium platform ladder
Manufactured in New Zealand
Maximum load rating 120kg
Two steps plus top platform
Cross-braced legs for stability
Warning labels attached on sides
Ribbed steps and platform for grip
Rectangular aluminium frame construction
Rubber capped feet
Meets requirements for tested model

FEEDDEX 61 Mixer with AEI Kapak Motor

Skylarc Ref O171886

FEEDDEX 61 mixer unit
Twin hopper feed system
Powered by AEI Kapak motor type D112M
Motor rated at 3 horsepower
Motor voltage 400V
Three phase motor
Motor speed 940 RPM
Continuous duty motor
Motor current 5.1 amps
Starter is Nilsen OJ15 direct on line type 3
Starter line voltage 400V and coil voltage 400V
Starter frequency 50 Hz
Starter range 12.6-18 amps
Starter horsepower rated for 10 HP
Fitted with IP66 32A 500V plug (PDL 56PA432)
Steel construction with support frame
Protective grid fitted in both feed hoppers
Electrical control box attached

2x SRC-55 Air Rivet Guns

Skylarc Ref N110041

2x SRC-55 Air Rivet Guns.
Some missing components, see photos.
Both are untested.

Richmond 2000kg Pallet Trolley Jack

Skylarc Ref O170274

Richmond 2000kg Pallet Trolley Jack.
1055mm fork length.
155mm fork width.
Gap between forks 220mm.
Fork height from 90mm to 150mm.
Very dirty surfaces but appears to function as it should.

Ullrich Aluminium Platform Ladder

Skylarc Ref R171603

Ullrich brand aluminium platform ladder
Manufactured in New Zealand
Maximum load rating 120kg
Two steps plus top platform
Cross-braced legs for stability
Warning labels attached on sides
Ribbed steps and platform for grip
Rectangular aluminium frame construction
Rubber capped feet
Meets requirements for tested model

Benchtop Arbor Press

Skylarc Ref D171667

Benchtop Arbor Press.
Unknown manufacturer/model.
Base measures 375x150mm.
Frame height 310mm.
Total height with press rod 505mm.
140mm diameter rotating press base wirh four slot widths of 15mm, 20mm, 25mm, and 40mm.
Press rod is 30mm diameter.

EasyAccess Co. Industrial Dual Purpise Step Ladder, 1.8m

Skylarc Ref P170249

EasyAccess Co. Industrial Dual Purpise Step Ladder.
1800mm high double Sided step ladder or 4500mm extension ladder.
150kg max weight.
Very dirty surfaces but overall still good condition.

Iscar Indexable Grooving Tool GHIR 20-20-4

Skylarc Ref I170294

Iscar Indexable Grooving Tool GHIR 20-20-4
200mm length.
As new with Torx key tool and plastic case.

Metabo Corded Router

Skylarc Ref F110033

Metabo Corded Router.
Model No. Of E 1812.
Single phase.

3 x Steel Louvered Panels 910mm x 300mm

Skylarc Ref K171804

Three steel panels included
Each panel measures 910mm x 300mm
Panels have louvered slots
Panels include pre-drilled mounting holes on edges
Panels are painted white
Suitable for wall mounting or shelving systems

470-150 400M Bar Holder

Skylarc Ref J171855

Marking on tool shows 470-150 400M.
Metal bar holder with squared sides.
One end has a hole and a pin assembly.

FLUX F458 Drum Pump

Skylarc Ref B171613

FLUX-GERATE GMBH F458 drum pump.
230V 50Hz power supply.
460W power rating.
2.2A current.
IP55 rated enclosure.
Single phase operation S1.
Includes power cord with standard plug.
Comes with stainless steel pump tube.
Hose with fittings attached.
Made in Germany.

Bosch GWS 26-180 B Angle Grinder

Skylarc Ref N171547

Model Bosch GWS 26-180 B
Rated voltage 240V
Rated frequency 50Hz
Power input 2500W
Disc diameter 180mm
No load speed 8500min⁻¹
Thread M14
Current 10A
Includes one fastening flange
Made in Germany
Serial number 391000033
Manufacturer Robert Bosch GmbH D-70745 Leinfelden-Echterdingen

Horn Grooving Toolholder 228.0050.0348

Skylarc Ref C170288

Horn Grooving Toolholder 228.0050.0348 is shown.
Made in Germany.
Horn manufacturer number 2666863.
The body is marked 228.0050.0348.
250mm long, 50mm diameter.
Appears as new unused.
Also includes 10x new inserts Part No.231.7512.4324 MG 12

Assorted Vintage Fastening Hardware, Fittings

Skylarc Ref V171633

Assorted Vintage Fastening Hardware, Fittings.
Various steel and brass Fittings, screws, nuts, circlips, etc. See photos for further details on included items.

Bench Grinder 150mm 0.5HP

Skylarc Ref M171546

Bench grinder
Wheel size 150mm
Power 0.5 horsepower
Speed 2800 RPM
Voltage 220V
Current 2.8 amps
Single phase
Frequency 50Hz
On off switch mounted at base
Protective shield fitted on both wheels
Two grinding wheels installed

On off switch very hard to press

Assorted Paint Brushes Lot

Skylarc Ref P171445

Lot includes assorted paint brushes with wooden and plastic handles
Various widths and bristle types included
Some brushes are new and sealed in plastic packaging
Mix of flat, angled, and wide brush heads
Wooden handles are marked '100 percent pure bristle' and 'Made in Indonesia'

Sunlight 150mm Adhesive Backed Sanding Disks

Skylarc Ref F173671

Sunlight 150mm Adhesive Backed Sanding Disks.
Includes:
- 6x 100-piece packs of Part No.01312, 240-grit disks.
- 2x 100-piece packs of Part No.01310, 180-grit disks.

All are new unused.

Hitachi G 23MR 230mm Disc Grinder

Skylarc Ref A168201

Model Hitachi G 23MR 230mm disc grinder
Rated voltage 230V
Frequency 50Hz
Current 10A
Motor power 2400W
No load speed 6600 revolutions per minute
Disc diameter 230mm
Maximum speed 80 metres per second
Model number C327590H
Side handle attached
Abrasive disc installed
Power cord attached
Power cord insulation is damaged exposing conductor
Made in Malaysia