SKYLARC'S INDUSTRIAL AND ENGINEERING AUCTION

Laguna 18BX Single Phase Bandsaw

Skylarc Ref V167208

Laguna 18BX Single Phase Bandsaw.
Model No.mbsnd 18bx-2203
Manufactured in 2022.
Single phase 16A plug.
Blade sizes from 3-30mm x 3651-3696mm
186kg weight.
Saw shows light use.
https://lagunatools.com/classic/bandsaws/18bx/?srsltid=AfmBOooftZib7NLaAiAobIor9zRNg9LtpgF82paQgD-M-RG-Qt7Va7o_

40' Shipping Container

Skylarc Ref O167903

40' shipping container
One rust spot in roof will need repair but overall a tidy container
Ply floor
Section of box steel mounted on roof
Located Mcleans Island Road
Canterbury local delivery available
Ask a question with location for a price

40' Refrigerated Shipping Container

Skylarc Ref N167902

40' refrigerated shipping container
Faulty refrigeration compressor
Long dent down outside wall
Located Mcleans Island Road
Canterbury local delivery available
Ask a question with location for a price

Jingjin Filter Press Model XG10/630-U

Skylarc Ref K109934

Manufacturer Jingjin Environmental Protection Inc.
Model XG10/630-U
Plate quantity 17 pcs
Filtration area 10 square meters
Hydraulic pressing pressure 13 MPa
Filtration pressure 0.6 MPa
Squeezing pressure 1.2 MPa
Anchor hole spacing 2050 mm
Control panel with emergency stop power start stop and other labeled controls
Includes filter plates and associated piping
Base frame with integrated hydraulic power unit
Feeding pump installed and connected
Safety operation instructions attached in English and Chinese
Serial number 201340706

Hafco Metalmaster EB-260V Bandsaw

Skylarc Ref X168692

Model EB-260V.
Maximum capacity 225mm.
Serial number 201703342.
Manufacture date 03/2017.
Weight 200kg.
Voltage 240V 50Hz single phase.
Main motor power 1.5kW.
Main motor speed 850-2800RPM.
Main motor current 6A.
Coolant pump output 1/8HP.
Coolant pump power 0.1kW.
Coolant pump voltage 240V 50Hz single phase.
Coolant pump RPM 2840.
Bandsaw blade size 2480x27x0.9mm.
Control panel includes emergency stop, start, stop, speed adjustment, and coolant control.
Made in Taiwan.

Ajax Radial Arm Drill

Skylarc Ref D167242

Ajax Radial Arm Drill.
Made in England.
Type No.16641
Age unknown.
32A 3-phase plug.
Material mounting block approx 610x455x450mm.
Vertical height range 1200mm.
Drill swing approx 900mm
Morse Taper No.4 Chuck.

Chevalier Teach Lathe

Skylarc Ref Y168225

Chevalier FCL-1860 CNC lathe
Three phase
1400mm between centres
460mm swing over bed
230mm swing over cross slide
56mm spindle bore
Fagor CNC control panel installed.
Maximum speed for 8 inch chuck is 2000 rpm.
Maximum speed for 10 inch chuck is 1800 rpm.
Spindle speed ranges: High 600-2000 rpm, Medium 150-700 rpm, Low 40-200 rpm, Neutral gear.
Gearing and spindle speed chart attached on machine.
Quick change toolpost present.
250mm three jaw chuck
250mm four jaw chuck
Fixed and travelling steadies
Coolant system installed with flexible coolant hose.
Emergency stop controls on both operator and CNC panels.
Serial number X285011.
Manufacturer: Falcon Enterprise Co., Ltd, Taichung, Taiwan.
Has controller fault images of errors attached
Project machine in otherwise tidy condition
You will need your own lifting equipment to load this machine

Herbert Metal Master GH-40 Geared Head Drilling and Milling Machine

Skylarc Ref U168689

Herbert Metal Master GH-40 Geared Head Drilling and Milling Machine
Spindle speeds selectable from 95 to 1970 rpm depending on setting
Spindle speed chart provided on the front panel
Capable of drilling capacity up to 32 mm
Capable of face milling up to 80 mm
End milling capacity up to 28 mm
Manual controls for head adjustment and table movement
Handwheels with graduated dials for precise movement
Slotted work table with T-slots for clamping
Mounted on a metal stand
Fitted with New Zealand standard 3-pin plug
Serial number 200045

Bemato BMT-260S Metal Horizontal Bandsaw

Skylarc Ref Y168693

Model Bemato BMT-260S.
Serial number 07102799.
Voltage is 380V.
Frequency is 50Hz.
Main motor power is 1.1kW.
Total power is 1.19kW.
Three phase power connection.
Blade size is 27mm x 0.9mm x 2460mm.
Blade speed is 72m/min or 36m/min.
Capacity at 90 degrees is 227mm, 220mm, or 260 x 110mm.
Capacity at 45 degrees is 150mm or 145mm.
Capacity at 60 degrees is 90mm or 85mm.
Capacity at 45 degrees (L) is 110mm.
Equipped with a controlled descent lever.
Control panel includes main switch and speed selection.

Fugi FM-VO-B Vertical Milling Machine

Skylarc Ref R168686

Fugi Vertical Milling Machine
Type FM-VO-B
Serial number 8225
Date of manufacture 1979.8
Made in Taiwan
Induction motor installed
Induction motor type TMEC STM40
Motor phase 3
Motor cycle 50
Motor volt 400
Motor amp 4.60
Motor B.P.M. 1440
Coolant pump included
Coolant pump speed 2850/3450 RPM
Coolant pump manufactured by Chiu Wei Industries Co Ltd Taiwan
Power feed model AL-500S installed
Power feed input AC 110V 90W 50/60Hz
Multiple hand wheels for table tram and adjustment
Mounted on steel drip tray
Mounted on timber pallet

TOS Universal Milling Machine

Skylarc Ref W168223

Manufacturer TOS Olomouc
Model FU20
1400mm x 300mm table
45 - 1200rpm spindle speeds
NT40 spindle taper
Made in Czechoslovakia
Serial number 3620477
Includes electrical control cabinet
Dividing head and drive components
Milling vise
Change gears
Manuals
Horizontal arbor supports
Accessories included as shown in images
Coolant pump unit
You will need your own lifting equipment to load this machine

BNT Air Compressor 3.0HP 180L Model TB-300600A

Skylarc Ref N168682

BNT Air Compressor with 3.0 horsepower motor
Model TB-300600A
Voltage 230V
Frequency 50Hz
Maximum pressure 8.8 bar
Tank capacity 180 litres
Air delivery rate 480 litres per minute
Rated RPM 2850
Tank manufactured by EMAX Power (Shanghai) Co. Ltd
Tank built to AS1210:2010 Class 3 standard
Tank material JIS SS34
Design pressure 900 kPa
Working pressure 800 kPa
Testing pressure 1287 kPa
Hydrostatic test date 08/2016
Temperature range 0 to 150 degrees Celsius
Serial number TB806201407

Loma Systems IQ2 Metal Detector

Skylarc Ref C109900

Loma Systems IQ2 metal detector unit
Stainless steel construction
Rectangular inspection aperture
Digital control panel with display and keypad
Model identified as IQ2 from Loma Systems
Wired signal lamp attached
Unit has exposed wiring harness
Inspection Systems NZ service sticker attached
Label with 24 hour support number visible
Power and control wiring visible on left side
No conveyor or transport mechanism included
No additional accessories included

Industrial Rotary Drum Mixer with SEW-Eurodrive Motor and Control Panel

Skylarc Ref M109936

Rotary drum mixer on steel frame
Drum constructed from composite or fibreglass material
Large external gear for drum rotation
SEW-Eurodrive K97 DRN100LS4/BE5HF motor and gearbox assembly
Motor power 2.2 kW S1
Motor voltage 230/400V
Motor speed 1450 rpm
Gearbox reduction 96.80 Nm 1400 rpm
Motor efficiency IE3 class
IP66 rated motor
Motor Year 2017
Control panel with Danfoss VLT AutomationDrive
Control panel with multiple selector switches and push buttons
Process automation components visible inside panel
Fitted with ball valve and stainless steel pipework for inlet or outlet
Helical internal spiral for product movement inside drum
Mounted for horizontal operation
Drain or fill port visible on drum side
No further details on capacity or dimensions provided

Mettler Toledo IND221 Platform Scale

Skylarc Ref W110258

Mettler Toledo IND221 digital indicator included
Indicator displays weight in kilograms and pounds
Platform dimensions are 1200mm by 1200mm
Platform constructed from checker plate steel
NZ/AU standard mains plug attached
Toltec Scale Limited certificate of accuracy label present
Certificate expiry date on label: 12-6-26
No load cell or capacity information visible

Industrial Crushing / Grinding Machine?

Skylarc Ref X109947

Industrial Crushing / Grinding Machine.
Unknown brand/model, possibly custom built.
Grinding or crushing Assembly made from up to 20mm plate steel.
4x 3-phase motors on unit.
On one side is an attached 5-metre long stainless tube conveyor assembly.
See photis for further details on design of this item.
Item previuosly used in a gelatine factory.
NOTE that this item is estimated to weight at least 3500kg and is too heavy for our forklifts. Buyer will need to bring appropriate methods of lifting and removing this heavy and awkward shaped unit.

K-2-SS Vibratory Sieve Separator

Skylarc Ref R110227

Model K-2-SS is indicated on the data plate.
Serial number 6624 is present on the data plate.
Electrical rating is 415 volts.
Frequency rating is 50 Hz.
Power rating is 1.75 kW.
Rotation speed is 960 rpm.
Multiple screening decks are installed.
Stainless steel construction is visible.
Screen mesh and deblinding balls are present inside the top deck.
Four discharge outlets with two fitted with flexible red sleeves.
Mounted on a round white painted base.
Requires three-phase power supply.

MSA Self Contained Breathing Apparatus Kit

Skylarc Ref J167430

MSA self contained breathing apparatus kit
6.8L composite air cylinder manufactured 07/2022
Cylinder pressure rating: 300 bar, 450 bar test, EN12245 certified, 30 year design life
Backplate labeled as M1 series, serial number 2056192, dated 08/2022
Certified to EN 137:2006 Type 2, BSI and CE0158 marked, compliant with AS/NZS 1716:2012
Includes full face mask (CE 0158, EN136:1998 CL3+) and demand valve
Cylinder gauge and harness included
Protective hard storage/carry case with wheels
Instruction manual and accessory pack included
Components appear unused, visually in excellent condition

AVYAC C222 Manual Grinding Machine

Skylarc Ref V168690

Manufacturer AVYAC
Model C222
Serial number 93208
Power 0.8 kW
Voltage 220V
Frequency 50 Hz
Weight 160 kg
Manufacture date 9 January 1988
Manual grinding machine
For drill diameters 2 to 26 mm
Includes chuck and grinding wheel
Supplied by MacDonald Machinery Auckland
Manual documentation included
Additional metal parts included
Loose power cable present

40' Container Shelter

Skylarc Ref U166661

40' container shelter
Bottom of brackets have been cut off
No mounting bolts
Containers are NOT included
Will be dismantled for collection

Miller Deltaweld 402 Welder w/ 60 Series Wire Feeder

Skylarc Ref L168342

Miller Deltaweld 402 Welder.
3-phase.
Invludes 60 Series Wire Feeder.
Includes attached cables, hoses, torch tool.
System is mounted on a mobile Trolley Cart.
Tyres on cart are low on air pressure.

Stainless Steel Vertical Tank with Cone Bottom

Skylarc Ref O109938

Stainless steel tank with vertical cylindrical body.
Cone bottom outlet design.
Multiple inlet and outlet ports on sides and top.
Equipped with manway on top.
Mounted on four legs with a frame base.
Large hand wheel valve at the bottom outlet.
Internal inspection shows no visible agitator or internal fittings.
Tank features welded construction.
No manufacturer identification visible.
Motor and gearbox assembly mounted separately next to tank.
External connection piping is present.
Interior and exterior surfaces are visible in the provided images.

Genuine Black Walnut Slab

Skylarc Ref B167058

Genuine Black Walnut Wood.
Measures approx 2200x1110x85mm.
Partially crated in a protective frame with shrink wrapping. Some wrapping has been removed by us for inspection and auction photos.

Festool MFT/3 Multifunction Work Table

Skylarc Ref O167097

Festool MFT/3 Multifunction Work Table.
1100x720mm MDF top board with holes spaced 100mm apart on centre.
Folding legs for storage.
Auction includes table only, Festool attachments and accessories are not included.

Siruba DL7000-NH1-13 Industrial Sewing Machine

Skylarc Ref A110106

Siruba DL7000-NH1-13 industrial sewing machine
Manufactured by Kaulin MFG. CO. LTD.
Equipped with Siruba L-90A control panel
Table with integrated sewing lamp included
Foot pedal control unit marked Siruba
Thread stand with two spool positions
Model marked as DL7000-NH1-13 on the identification plate
CE conformity marking present
MFG NO. 880594 shown on the label
Power switch located on the machine head
Multiple control buttons for operating functions
Large work surface suitable for industrial applications

Stainless Steel Platform with Steps and Railing

Skylarc Ref B168644

Stainless steel construction.
Top platform size is 850mm by 700mm.
Platform accessed by six perforated non-slip steps.
Handrails on both sides of steps and around platform.
Railing height is 1000mm from base.
Raised black plastic bin attached to one side of platform.
Platform supported by four vertical legs.
Yellow grip strips present on each step and entry to platform.

BraunAbility Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref K168653

BraunAbility Wheelchair Hoist.
Model number L9181B3351RP-2TC.
Serial number 17052500971.
Manufacture date 25 May 2017.
Max lifting capacity 363 kg.
Power supply required 70 amp max load current.
Emergency stop button located on the main control box.
Hand control with coiled cable attached.
Safety barriers with green and yellow protective coating.
Mesh platform with yellow edge markings.
Supplied with an instruction CD.
Service completed on 15 April 2024.
Next service due 15 October 2025.
Safe working load sticker present on frame.
All labels and service records visible on unit.

Rank Taylor Hobson Engraving Machine Type D No. 852

Skylarc Ref S168687

Made in England by The Rank Organisation Rank Taylor Hobson Division Leicester
Type D No. 852
Engraving machine
Cutter spindle speeds range from 2730 to 18000 RPM
Lancashire Dynamo and Crypto motor
Motor specification: 0.16 HP 230V 2850 RPM 50Hz
Auto-Memota relay present
Relay rated for 230-250V 50 cycles
Mounted on cast iron base
Equipped with table and control levers
Includes motor wiring and attached electrical box
Single phase

BraunAbility Wheelchair Hoist L918IB3351RP-2TC

Skylarc Ref G168649

BraunAbility wheelchair hoist.
Model number L918IB3351RP-2TC.
Maximum lifting capacity 800 lb.
Manufacture date 1/3/2017.
Last serviced 15/5/2024.
Next service due 15/11/2024.
Manufactured in Indiana, USA.
Full load current 70 amp max.
Includes attached control box with emergency stop button.
Push button hand remote with four-way directional controls included.
Frame and platform constructed with black and yellow highlighted steel components.
Mesh platform design.
Handles are coated green and yellow for visibility.

Genuine Kauri Wood Table Top w/ Resin Coating, Unfinished

Skylarc Ref G167089

Genuine Northlands Kauri Wood Table Top w/ Resin Coating, Unfinished.
Measures approx 2035x950x85mm.
Note that the Resin Coating has not been sanded smooth, buyer will need to finish.
Milling statement No. 7-00-00431

Eurospark 50A EDM Machine

Skylarc Ref Z168226

Eurospark EDM machine
Model type 50A
Manufactured by Agemaspark Ltd
Made in England
430mm x 305mm T slot table
Voltage 220 or 550 volts 50 or 60 Hz
Rated at 5 kVA
Serial number 3913-
Includes a 60 litre drum of EDM fluid labeled as kerosene
System 3R chuck visible on spindle
Handwheels on side for manual adjustment
20870 hours on clock
Mounted on pallet for transport
Physical condition as photographed
No information on included accessories beyond what is shown
Machine was running when removed but hasn't run in several years
Handy sized workshop machine

Genuine Northlands Swamp Kauri Wood, 1850x970x75mm

Skylarc Ref N167096

Genuine Northlands Swamp Kauri Wood.
Measurements approx 1850x970x75mm.
Milling statement No. 7-00-00431

Industrial Steel Access Platform with Stairs and Handrails

Skylarc Ref X168614

Top platform dimensions are 940mm x 1360mm
Platform height is 1850mm from the ground
Handrails add 1000mm to the platform height
Perforated steel steps and platform
Fixed steel frame construction
Stairway access to the platform
Handrails on platform and stairs for safety

Industrial Stainless Auger Bin

Skylarc Ref W109946

Industrial Stainless Auger Bin.
Item appears custom built.
A Danfoss VLT Aqua Drive Unit is mounted on one side.
Previously used in a gelatine factory as gelatine residue still on and within unit.
Mounted on castors but unit seems to heavy for castors to roll properly.
See photos for further design details.
NOTE that this unit is beyond the lifting capabilities of our forklifts so buyer must bring equipment capable of lifting an estimated 3500kg or heavier unit.

Pallet Racking Shelf Assembly.

Skylarc Ref Y168329

Pallet Racking Shelf Assembly.
Includes the following components:
3x 910x90x2130mm galvanised steel vertical frames.
16x 1830x45x55mm orange horizontal beams.
There are no Shelving boards included.

Industrial Stainless Steel Dewatering Tank with Motorised Conveyor

Skylarc Ref N109937

Stainless steel tank with perforated internal surfaces.
Motorised conveyor installed at one end of the tank.
Conveyor appears to be stainless steel with electrical motor and protective cover.
Tank supported on a heavy-duty steel frame.
Multiple pipe fittings and valves attached for drainage.
External surface of tank shows significant rust on frame and edges.
Perforated base and sides suggest dewatering or solids separation function.
Internal tank surface includes several mounting points for attachments.
Side panels have high visibility hazard striping.

IBC 1000L Plastic Water Storage Tanks

Skylarc Ref C109926

IBC tanks with plastic inner containers and metal cage exteriors
Approximate capacity 1000 litres per tank
Fitted with top fill caps
Fitted with bottom drain valves
Mounted on plastic pallets for handling
Suitable for water storage or other liquid containment
Multiple units shown in the images
Condition and previous use unknown

BraunAbility Wheelchair Lift L9181B3351RP-2TC

Skylarc Ref E168647

Manufacturer is BraunAbility.
Model number is L9181B3351RP-2TC.
Manufacture date is 1/3/2017.
Lifting capacity is 800 lb or 363 kg.
Full load current is 70 Amp max.
Emergency stop button included.
Handheld control with buttons for functions F UNF U D.
Mesh platform and safety rails present.
Serial number 17010300839.

Siruba DL7000-NH1-13 Industrial Sewing Machine

Skylarc Ref D110135

Siruba industrial sewing machine model DL7000-NH1-13
Kaulin Manufacturing Co Ltd
Electronic control panel model L-90A
Machine includes two thread stands
Mounted on rolling table frame
Foot pedal included
Power cable attached
Integrated accessory tray
Manufacturing number 128362790

Stainless Steel Storage Tank

Skylarc Ref L109935

Stainless steel cylindrical storage tank
Mounted on four tubular steel legs
Fitted with bottom outlet valve
Several fittings and nozzles visible on top lid
Approximate dimensions and volume are not specified
Condition consistent with outdoor storage
No manufacturer markings visible in provided images

Excavator Bucket

Skylarc Ref Q168659

Width across bucket is approximately 400mm
Pin centre to pin centre distance is approximately 210mm
Overall height is approximately 600mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

Stainless Steel Mixing Tank with Agitator

Skylarc Ref P110225

Stainless steel construction tank.
Equipped with three ports on the lid.
One large threaded opening on the lid for access or filling.
Mounted on three legs for stability.
Includes an internal agitator with shaft and impeller.
Agitator attached to the tank lid and extends to the bottom.
Bottom side outlet port visible.
Condition and specifications based only on visible features.
Capacity not marked or specified.
No visible control electronics or motor included for the agitator.
Dimensions and volume not confirmed.

Stainless Steel Storage Tank

Skylarc Ref H109931

Stainless steel cylindrical storage tank
Horizontal orientation
Multiple inlet and outlet pipe fittings
Manway access hatch on one end
Internal surface polished stainless steel
External surface stainless steel
Reinforced support legs attached
Approximate diameter visually estimated at around 2 metres
Approximate length visually estimated at around 3 metres
Various fitting ports on tank ends
No identification plate visible in images

Hitachi 2 Ton Electric Chain Hoist Type 2SH

Skylarc Ref U168611

Hitachi electric chain hoist
Model Type 2SH
Rated capacity 2 ton
Lifting height 6 metres
Weight 59kg
Hoisting speed 2.3 metres per minute on 50Hz
Hoisting speed 2.8 metres per minute on 60Hz
Motor is 3 phase two pole
Voltage options 220V 380V 415V
Rated current 3.8A at 220V 2.2A at 380V and 415V
Insulation class E
Limit switch specification 600V 17A 50/60Hz
Manufactured by Hitachi Ltd Tokyo Japan
Pendant control attached
Fitted with industrial power plug
Includes trolley assembly

Large Industrial Conveyor Roller Assembly

Skylarc Ref A168331

Large Industrial Conveyor Roller Assembly.
Stainless steel rods approx 1850mm wide, total width includes side roller chain approx 1950mm.
Length of assembly is roughly estimated at around 3 metres.
Side roller chain very rusty from outdoor storage. Some stainless rods are detached from side chain.

Siruba DL7000-M1-11 Industrial Sewing Machine

Skylarc Ref H110113

Siruba model DL7000-M1-11 industrial sewing machine
Manufactured by Kaulin Mfg. Co. Ltd
Machine includes Siruba L-90A control panel
Pedal operation
Mounted on a metal frame table with casters
Two spool holders and thread guides attached
Electrical cord visible with standard plug
Includes flat working table with wooden extension
No documentation of accessories or attachments included

90 Litre 3 Hp Air Compressor

Skylarc Ref Y167523

90 Litre 3 Hp Air Compressor
Single Phase

Industrial Access Platform with Stairs and Railings

Skylarc Ref Z168642

Top platform measures 2200mm x 1070mm
Railing height is 1000mm
Structure includes one access stairways
Stair treads and platform surfaces are yellow grating
Frame constructed from metal
Integrated handrails on both sides of each walkway
Includes fixed support legs with plate bases
One side contains attached electrical wiring and a control box

Large Industrial Electric Motor

Skylarc Ref B110237

Large industrial electric motor shown mounted on a pallet
External junction box attached to the side
Ventilated end bell with lifting eye on top
Coupling attached to the drive shaft
Significant visible rust on exterior surfaces
Finned body housing for cooling
Flange mounting configuration
No manufacturer label or technical specifications visible
Wiring glands present on junction box
No cables or wiring supplied

Calzoni Hydraulic Motor

Skylarc Ref T168350

Calzoni Hydraulic Motor.
Possible model number 16610?
See photos for further design/type details.
Possibly an unused unit as shaft is wrapped in a protective wax and mounting points show no bolt wear marks.

Slings Shackles and Hooks

Skylarc Ref E168673

Assortment includes multiple lengths of chain slings with hooks.
Includes metal shackles of various sizes.
Some chain slings have multiple legs with hooks attached.
Some hooks are painted blue or yellow.
One assembly includes a swivel link with shackles.
Includes chain lengths with attached safety tags.
Visible surface rust present on all items.
All items appear to be steel construction.
Set includes both bow shackles and straight slings.
Visual inspection shows a variety of end fittings and connectors.

Stainless Steel Divided Tank

Skylarc Ref A168643

Overall tank size is 1400mm x 2400mm x 1300mm
Each side measures 660mm x 2400mm x 1300mm
Stainless steel construction
Two separate internal compartments
Multiple threaded pipe connections on both ends
Mounted on steel legs with base plates
Rectangular open top design
Internal divider panel runs lengthwise
Surface shows visible signs of previous use
No visible manufacturer's markings

WEG TEFC Motor with Stainless Pump Assembly

Skylarc Ref K110246

WEG brand electric motor.
Model TEFC W22.
Power rating 15 kW.
Voltage 415 V.
Current 51.4 A.
Speed 2960 RPM.
Duty S1.
Insulation class H.
Frequency 50 Hz.
IP66 rated enclosure.
Motor plate weight 258 kg.
Includes stainless steel pump assembly.
Pump casting shows marking 0458480026.
Supplied mounted on a steel baseplate.
Fitted electrical isolator box with rotary switch and attached cable.

TSi IAQ-CALC 7515 Indoor Air Quality Meter

Skylarc Ref H167428

TSI IAQ-CALC 7515 Indoor Air Quality Meter for measuring CO2 concentration in indoor environments
Made in USA by TSI Incorporated
Large easy-to-read display
Uses 4x AA batteries (not included)
Protective carry case with foam cutout included
Comes with operation and service manual
Accessory probe included as shown
Calibration date: March 2023
Good condition with some minor exterior marks
Model, serial, and revision info displayed and verified
Full manufacturer specs: https://tsi.com/products/indoor-air-quality-meters-instruments/indoor-air-quality-meters/iaq-calc-indoor-air-quality-meters-7515

Kincrome Blue Steel Mobile Tool Trolley Cabinet

Skylarc Ref B167422

Kincrome Blue Steel Mobile Tool Trolley Cabinet complete with 6 lockable drawers and keys included
Durable blue powder coat finish with chrome handles
Heavy-duty castor wheels for easy movement and repositioning
Large side handle for convenient mobility around your workshop
Top mat included for secure tool placement on work surface
Supplied with a selection of assorted hand tools, socket set, pliers, screwdrivers, hex keys and more as shown
Drawers are lined to protect tools and reduce noise
Both cabinet and included tools are in excellent condition
Ideal for workshop, trade, or garage use

Braun Millennium Series Wheelchair Hoist L918IBTC

Skylarc Ref H168650

Braun Millennium Series Wheelchair Hoist.
Model L918IBTC.
Manufactured by The Braun Corporation.
Maximum lifting capacity is 800 lb or 363 kg.
Serial number is 14-02545.
Manufacture date is 09/13/2011.
Electric powered system.
Platform features a black metal mesh design.
Green and yellow safety rails on both sides.
Hale Manufacturing Christchurch service label present.
Service record indicates last service on 4/2/25.
Next service due 4/8/25.
Includes visible wiring and connection ports.

Siruba DL7000-NM1-11 Industrial Sewing Machine

Skylarc Ref Y110130

Siruba industrial sewing machine
Model DL7000-NM1-11
Manufactured by Kaulin MFG. CO. LTD
CE marked
Includes control panel model L-90A
Mounted on workstation table with ruler markings
Integrated foot pedal
Thread holder and bobbin stand attached
Machine serial number 27365200

Sensirion Mass Flow Controller Kit SFC5500

Skylarc Ref E167009

Sensirion Mass Flow Controller Evaluation Kit
Model: SFC5500-10slm, Multigas
Includes mass flow controller, power adapter, data/USB cable, and original box
Comes with SFC5xxx series quick start guide
RS485/IO Link/CAN connectivity options
Serial No. 23010169, Ref. conditions: 20°C, 1013 mbar
Visible protective cap still installed on inlet/outlet
Sensor condition appears unused
Registration date on box: 26.09.2023
Suitable for gas flow measurements and control applications

3-Phase 32A Power Lead Cable, 20-Metre Length

Skylarc Ref D168334

3-Phase 32A Power Lead Cable.
20-Metre Length.
Aflex HDX 4x2.5mm² 0.6/1kV X90 cable.

Roller Conveyor Sections 14 Pieces

Skylarc Ref F168622

Thirteen roller sections measure 2400mm x 350mm each.
One roller section measures 1444mm x 350mm.
Fourteen roller conveyor sections total.
Steel frames with green cylindrical rollers.
Rollers mounted in parallel within frame.
Roller sections appear stackable for transport.

Nimrod Excavator Bucket

Skylarc Ref S168661

Brand is Nimrod
Width across bucket is approximately 160mm
Pin centre to pin centre distance is approximately 220mm
Overall height is approximately 750mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

Warehouse Shelving

Skylarc Ref X167990

Heavy duty steel shelving unit with 4 adjustable height shelves
Suitable for garage, workshop, or warehouse storage
All-steel construction for durability and strength
Shelves can be repositioned to accommodate various storage needs
Approximate external dimensions: 2m wide x 600mm deep x 2m high
Grey shelves with a black powder-coated steel frame
Some cosmetic wear and paint chipping visible from regular use
Boltless assembly design for easy setup and adjustment

Siruba DL7000-H1 Industrial Sewing Machine

Skylarc Ref C110134

Siruba DL7000-H1 industrial sewing machine
Manufactured by Kaulin MFG. CO., LTD
Model DL7000-H1-13
Includes control panel model Siruba L-90A
Mounted on wheeled steel frame table
Foot pedal included
Thread stands included
Power cord attached
Ruler integrated on tabletop
Serial number 26396855

Kerry's Ltd Double Ended Grinder

Skylarc Ref T168688

Manufactured by Kerry's Ltd Great Britain
Serial number 0SG 12 208
Double ended grinder
Start and stop push button control panel
Fitted with two grinding wheels
Freestanding cast metal pedestal base
Supplied by Kerry's Ltd Stratford London E15 England
Mains power cable is present but wires are disconnected
Model number or motor specifications not visible

Nimrod Excavator Bucket

Skylarc Ref T168662

Brand is Nimrod
Width across bucket is approximately 260mm
Pin centre to pin centre distance is approximately 220mm
Overall height is approximately 600mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

Juki DDL-8500-7 Industrial Sewing Machine

Skylarc Ref Z110131

Juki DDL-8500-7 industrial sewing machine.
Model plate: DDL-8500-7.
Manufactured by Juki Corporation Tokyo Japan.
Manufacturing number: 4DOSC06919.
Includes industrial table with integrated ruler on the front edge.
Foot pedal operation.
Equipped with thread spool holders attached to the table.
Control panel with power switch mounted on the table.
Standard three-prong plug rated for 230-240VAC 10A.
Machine head is mounted in a light wood laminated table.
Motor and wiring mounted under table surface.
Yellow catch bag attached to the side of the table.

Hydraulic Pump

Skylarc Ref P167852

Stamped C61001012
E1005

Siruba 767Qe Industrial Overlocker Sewing Machine

Skylarc Ref G110112

Siruba 767Qe industrial overlocker sewing machine
Mounted on rolling metal table with foot pedal
Model 767Qe visible on front
Made by Kaulin MFG Co. Ltd
SPEC 516M2-524
Supplied by Sewingtime (NZ) Ltd
Includes multiple thread spool holders
Electrical safety tag visible on power cord
Fitted with industrial power plug
Table contains integrated measuring ruler
Includes thread guides and tension knobs
Red emergency stop button installed
Threaded and ready for use

Weg AL100L-04 Electric Motor with DABIBC Pump on Stainless Frame

Skylarc Ref T110229

Electric motor is a Weg AL100L-04 model.
Motor rated for 3.0-4.0 kW depending on voltage.
Rated voltage 220/380V Δ/Y or 230/400V Δ/Y 50Hz.
Motor current rating is 11.0/6.35A at 220/380V.
Rated speed is 1740 RPM.
Protection class IP55.
Gearbox or pump is DABIBC brand.
Mounted on stainless steel frame.
Pump is coupled to the motor via flanged connection.
Pump inlet and outlet ports are visible.
Power cable is included and not terminated.

Woodpeckers Autoscale Miter Sled Left

Skylarc Ref D167190

Leaf-spring miter bar fits perfectly in time-worn or poorly-machined miter slots.
Fence adjusts automatically to keep the length scale accurate at any angle setting.
Large, laser-engraved protractor adjusts to 60°; graduated in half-degrees.
Positive stops for 3,4,5,6,8 and 12 sided miters.
Micro-adjustable flip-stop won’t lift out of position.
Extendable fence carries the stop out to 50"
Phenolic table is impervious to changes in temperature or humidity.

https://www.woodpeck.com/autoscale-miter-sled.html

WEG W22 High Efficiency Electric Motor 3-160L

Skylarc Ref O109912

WEG W22 High Efficiency electric motor.
Model TEFFOXC.
Type 3-160L.
Date of manufacture 14JUN2017.
IP66 enclosure rating.
Insulation class H.
Service factor 1.15.
Ambient temperature 40°C.
Rated output 18.5kW at 50Hz.
RPM at 50Hz: 2945/2935/2945 depending on voltage.
Voltage 380V/400V/415V at 50Hz.
Current at 380V: 33.1A.
Shaft and flange visible on drive end.
Equipped with winding temperature detector (thermistor/ PTC, max voltage 2.5Vdc).
Connector plug attached to power cable.
Supplied on a metal mounting tray.
Bearing types: 6309-C3 and 6208-C3.
Made in Brazil.

Stainless Steel Water Filtration System with Blue Filter Housings

Skylarc Ref T168610

Stainless steel water filtration system.
Includes two blue plastic filter housings.
System features stainless steel piping and fittings.
Equipped with several manual valves.
Contains a pressure gauge fitted to the system.
Includes a cylindrical stainless steel vessel.
Mounted on a white plastic baseboard.
All components visible in photos are included.
No brand or model number is specified.
Condition and completeness not specified.

Weg W22 3kW Electric Motor with Progressive Cavity Pump

Skylarc Ref Y110000

Weg W22 electric motor
Model 13118610X03
3.0kW rated power
Y connection for 380V 50Hz draws 6.26A at 1430rpm
Star connection for 400V 50Hz draws 6.07A at 1445rpm
Star connection for 415V 50Hz draws 5.79A at 1445rpm
Star connection for 460V 60Hz draws 5.33A at 1740rpm
IP66 rated enclosure
Insulation class H
IE3 efficiency class
Mounted to a progressive cavity pump
Pump has stainless steel construction sections and blue painted barrel
Mounted on a stainless steel frame with four caster wheels
Electrical connection is visible
Pump inlet and outlet are visible and appear to have hygienic fittings
Motor manufactured in Brazil

Contra Shear S12 6mm Screen

Skylarc Ref U168637

Brand: Contra Shear
Model number: S12 6mm
Serial number: S79702
Constructed from stainless steel
Equipped with a wedge wire screen
Screen slot size 6mm
Manufactured in Auckland New Zealand
Inlet valve visible on top front
Outlet pipe located at the rear base

Stainless Steel Filter Press Plates

Skylarc Ref G109904

Stack of stainless steel filter press plates.
Plates have perimeter gaskets installed.
Plates have internal perforations for liquid flow.
Rectangular plate design.
Mounted on a plastic pallet.
Exact quantity not specified.
Dimensions and manufacturer not specified.

15mm Aluminium Sheet Offcuts

Skylarc Ref Q110148

Pallet containing aluminium sheet offcuts.
Sheets are wrapped in clear plastic film.
Variation in sheet sizes and shapes.
Some surface dirt and residue visible on packaging and material.
Material appears to be unfinished aluminium.
Quantity of sheets as shown in photos.

Multicomp Pro MP710086 Linear Benchtop DC Power Supply

Skylarc Ref E167425

Multicomp Pro MP710086 Linear Benchtop DC Power Supply
Output range: 0-30V / 0-5A with digital display for voltage, current, and power
Compact benchtop design, dimensions: 280x110x190mm
Front panel with clear LCD display, intuitive controls, and banana plug outputs
Memory, system, and keylock functions for convenience and safety
Rear panel features USB and RS-232 ports for remote control/monitoring
Input: 100-120V AC (F5A fuse) or 200-240V AC (F3A fuse), 50-60Hz, 300W/400VA max
Supplied with power cord, original user manual, and installation CD-ROM
Near new condition, shows no obvious signs of use

Draper MBS46A Metal Bandsaw

Skylarc Ref R168400

Model MBS46A
Stock number 30736
Motor power 0.5 horsepower
Power supply 240 volts
Cutting capacity 4.5 inch round
Cutting capacity 4 x 6 inch rectangular
Blade length 64.5 inches
Speed settings 65 95 165 rpm
Induction motor rated at 1420 rpm
Single phase operation
Motor current 3-5 amps
Class E motor insulation
Suitable for metal cutting tasks
Includes integrated stand and vice
Sticky start/stop button

Hitachi 2t Electric Chain Hoist Type 2FH

Skylarc Ref V168612

Manufacturer Hitachi Ltd Tokyo Japan
Model Electric Chain Hoist
Type 2FH
Rated load 2 tonne
Lift 6 metres
Chain diameter 10 mm
Speed at 50Hz 6.8 m/min
Speed at 60Hz 8.2 m/min
IP rating 44
Three phase motor
Rated 220V 50Hz 2.4kW 12.5A
Rated 380V 50Hz 2.4kW 6.0A
Rated 415V 50Hz 2.4kW 6.0A
Motor 2 poles
Mass 87 kg
Grade M4
Rated 30% ED 180 S/h
Date of manufacture 2001
Limit switch 600V 17A 50/60Hz

National Geographic Hobby Rock Tumbler

Skylarc Ref Y167003

National Geographic Hobby Rock Tumbler
Measures approx 210 x 155 x 160mm
Rubber rolling cylinder approx 105mm diameter and 95mm long with removable lid
Easy-to-use digital control panel with 7 day timer and power button
Operates smoothly and powers on as it should
Power cord and AC adapter included
Suitable for polishing rocks, stones, or small metal parts
Sturdy plastic base with anti-slip feet
Clean internal barrel, ready for use

Stainless Steel Filter Sheets

Skylarc Ref A110236

Stainless steel filter sheets.
Approximately 40 sheets stacked on a pallet.
Each sheet has a rectangular shape with a rubber seal around the inner edge.
Sheets feature multiple perforations for filtration purposes.
All sheets appear to be the same design and size.
Material is stainless steel throughout.
Exact measurements and model are not specified.

Raspberry Pi 4 Model B Computers w/ Accessories

Skylarc Ref V167416

4x Raspberry Pi 4 Model B mini computers, each with 64-bit quad-core Cortex-A72 processor and 4GB LPDDR4 RAM
Each board includes: 2 micro HDMI ports (supports up to 4Kp60), 2 USB 3.0 ports, 2 USB 2.0 ports, Gigabit Ethernet, Bluetooth 5.0, Wi-Fi 802.11b/g/n/ac
Advanced Edition Pack with 3x empty official cases (black/grey), 1x official HDMI cable, 1x official USB-C cable
All items appear unused, with one box opened only for photos
PoE-capable (requires PoE HAT, not included)
Made in the UK
5V/3A USB-C power supply required (not included)

Braun Wheelchair Lift

Skylarc Ref C168645

Braun Wheelchair Lift unit
Mesh steel platform with yellow safety markings
Green and yellow handrails on both sides
Control box with emergency stop button
Electric powered operation
Label indicates recent hoist service and safety check on 16-02-2024
Next service due 16-02-2025
Mounted on a wooden pallet
Visible Braun Wheelchair Lift branding on side
Manufacturer or further specifications not stated

Grundfos Electric Pump LCR 30-8 BE.2CS

Skylarc Ref R168348

Brand: Grundfos
Model: LCR 30-8 BE.2CS
Motor protection class IP55
Weight 43kg
Rated voltage 380-415V
Current 11.2A
Maximum current 12.4A
Speed range 2910-2930rpm
Frequency 50Hz
Made in Hungary
Three-phase power supply required.

Trades Pro Socket Set

Skylarc Ref G167895

Metric & Imperial Sockets
Largest 50mm
Smallest 22mm

Aeroqual Series 500 Portable Air Quality Monitor

Skylarc Ref F167426

Aeroqual Series 500 Portable Air Quality Monitor S500 V6.7 with lithium battery
Includes Aeroqual END NO2 0-1ppm sensor module (in packaging)
Includes Aeroqual EOZ O3 0-10ppm sensor module
Includes power supply (AU/NZ plug), USB cable, and RS232 cable
Monitor operates, but accuracy not verified
Sensors made in New Zealand
Digital display with user controls
Ports: RS232, 12V DC input, and RJ45
For full specifications, see manufacturer website: https://www.aeroqual.com/s-series-portable-air-monitors/series-500-portable-air-pollution-monitor
Box and manuals included

Set of Five Green Wheelie Rubbish Bins

Skylarc Ref Z168616

Includes five green wheelie bins.
All bins have two black wheels each.
Lids attached to each bin.
Three bins have "Rubbish" labels on lids.
Plastic construction.

Raspberry Pi's and Associated Item

Skylarc Ref T167414

Large lot of Raspberry Pi and associated electronics, ideal for DIY or prototyping projects
Includes at least 4x Raspberry Pi 4 Model B boards (visible in trays)
Assorted Raspberry Pi HATs and add-ons
Multiple sensors including advanced flow sensors and CH4 gas sensors
Various power supplies, USB adapters, and cables
Protech JST connectors kit (new/near new)
Breadboard kit with jumpers and assorted electronic components
Boxes labeled with Pi add-ons, jumper GPIO wires, and more
SparkFun IoT/electronics development boards with antennas and Vodafone SIM cards
Large quantities of pre-cut and bulk wire (red and black)
Selection of cooling fans, spare boards, and miscellaneous modules/parts
Everything organized in practical compartment boxes for easy project building

Kerastase Nutritive Assorted Haircare Masques, Serums

Skylarc Ref O166135

Kerastase Nutritive Assorted Haircare Masques, Serums.
Includes:
2x Kerastase Nutritive Masquintense 200ml.
4x Kerastase Nutritive Nutri-Supplement Scalp Serum 90ml.
2x Kerastase Nutritive Nutri-Supplement Split Ends Serum 50ml.
All are new in sealed packaging.

Industrial Heat Sealer Conveyor Assembly

Skylarc Ref K168341

Industrial Heat Sealer Conveyor Assembly.
Manufactured by Thornton Ratcliffe Ltd.
Conveyor belt 620mm long, 420mm wide.
Heat sealing ingredients bar is approx 520mm long, 520mm wide.
Single phase 10A plug.
Support frame/base legs not included.

Siruba DL7200-BM1-15 Industrial Sewing Machine

Skylarc Ref V110127

Siruba DL7200-BM1-15 industrial sewing machine.
Manufacturing number 920Y034009.
Made in China.
CE marked.
Table with built-in ruler included.
Onboard keypad and adjustment dial for operation control.
Needle type is 16x231 as indicated on the machine.
Power cable and foot pedal included.
Integrated task lamp attached to table.
Maintenance log present showing service history.
Most recent service entry is 23-5-24 for cleaning and oiling.

BraunAbility Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref I168651

BraunAbility wheelchair hoist
Model number L918IB3351RP-2TC
Manufactured 16 September 2015
Maximum lifting capacity 800 lb
Maximum lifting capacity 363 kg
Full load current 70 amp max
Emergency stop button present
Handheld control unit with up down and tilt functions included
Mesh platform with yellow safety edges and green handles
Serviced on 19 April 2024
Next service due 9 October 2024
Serial number 15091600350

Juki DDL-9000SS Sewing Machine

Skylarc Ref J110115

Juki Corporation DDL-9000SS industrial sewing machine
Made in Japan
Table included
Foot pedal included
CP-160 control panel attached
Dual spool holders installed
ON and OFF power switch mounted on the table
230V 50Hz lamp included
Three pin industrial power cable

Industrial Stainless Steel Motor Assemblies

Skylarc Ref H109905

Set of five stainless steel motor assemblies shown.
Each assembly has a cylindrical stainless steel housing.
Front end of each unit features a large flange and conical shaft.
Protective perforated metal cover at rear of housing.
Each unit is fitted with electrical wiring and a four-pin industrial plug.
Plug is an industrial 4-pin circular type with orange insulation ring.
Units appear to have fluid connections on housing.
No labels or nameplates visible to specify manufacturer or model.
No control boxes or external accessories visible.

Juki DDL-5550N-7 Industrial Sewing Machine

Skylarc Ref L110117

Juki DDL-5550N-7 industrial sewing machine.
Made in Japan.
Mounted on a dedicated sewing machine table with a ruler attached.
Includes attached motor and control box under the table.
Fitted with a dual cone thread stand.
Fitted with a 3-pin electrical plug rated at 250V.
Serial number: J14277.
Foot pedal attached to base.

Multicomp Pro MP710086 Linear Benchtop DC Power Supply

Skylarc Ref D167424

Multicomp Pro MP710086 Linear Benchtop DC Power Supply
Output range: 0-30V / 0-5A with digital display for voltage, current, and power
Compact benchtop design, dimensions: 280x110x190mm
Front panel with clear LCD display, intuitive controls, and banana plug outputs
Memory, system, and keylock functions for convenience and safety
Rear panel features USB and RS-232 ports for remote control/monitoring
Input: 100-120V AC (F5A fuse) or 200-240V AC (F3A fuse), 50-60Hz, 300W/400VA max
Supplied with power cord, original user manual, and installation CD-ROM
Near new condition, shows no obvious signs of use

2.9 Metre Ullrich Aluminium Ladder Trade Rated 150kg

Skylarc Ref D109901

Ullrich aluminium ladder
Trade rated 150kg
Extension step ladder configuration
Green and silver finish
Visible manufacturer label
Material appears to be aluminium
No additional accessories included

Large 3-Phase Electric Motor w/ 2x Pump Assemblies

Skylarc Ref A168357

Large 3-Phase Electric Motor w/ 2x Pump Assemblies.
Includes a GEC New Zealand Ltd induction motor.
Serial number 601027004C
Size 2801
Power 22 kW
Speed 1450 rpm
Phase 3
Frequency 50 Hz
Voltage 400 V
Current 41.5 A.
Motor measures approx 600x460x370mm
Auction Includes two similarity rusted pump units, brand/model are both unknown.
Motor is heavily rusted as ate the pumps. Unable to turn the motor shaft by hand.

Excavator Bucket

Skylarc Ref R168660

Width across bucket is approximately 400mm
Pin centre to pin centre distance is approximately 190mm
Overall height is approximately 600mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

HSC Hydraulic Systems & Components Power Unit with GEC Motor

Skylarc Ref V109919

Hydraulic power unit by HSC Hydraulic Systems & Components
GEC electric motor model B.100.LA4/GC installed
Motor rating is 2.2kW
Motor rated for 1430 rpm at 50 Hz
Motor voltage 400V Y connection or 230V delta connection
Motor current 5.0A at 400V or 8.7A at 230V
Motor insulation class F
Motor protection class IP55
Plug is a 4-pin industrial connector
Steel hydraulic tank included
Hydraulic pump and hoses attached
Change interval label from hsac.co.nz on tank
Motor manufactured by GEC (NZ) Ltd

Galvanised Mesh Gates 17x Various Sizes

Skylarc Ref P168658

Lot includes 13 gates measuring 2500mm x 1060mm
Lot includes 4 gates measuring 1400mm x 1060mm
Gates are constructed with galvanised pipe frames
Gates are fitted with steel mesh infill
Gates have integral hinge fittings
Gates are stacked on a timber pallet
Total of 17 gates in lot

Braun Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref F168648

Manufacturer is The Braun Corporation Indiana USA.
Model number is L9181B3351RP-2TC.
Manufacture date is 19 March 2018.
Maximum lifting capacity is 800 lb or 363 kg.
Serial number is 18031901230.
Full load current 70 amp max.
Equipped with a mesh platform and handrails.
Features an emergency stop button on the control box.
Designed for wheelchair lifting applications.
Product label identifies it as a Braun Wheelchair Hoist.

Stainless Steel Tank 1200mm Diameter 1400mm Tall

Skylarc Ref K110220

Stainless steel tank.
Diameter is 1200mm.
Height is 1400mm.
Cylindrical design.
Mounted on a tubular steel frame.
Equipped with bottom outlet pipes and flanges.
Internal view shows heating or cooling coils attached to the interior walls.
Multiple pipe fittings at the base of the tank.
Tank is open at the top with a removable cover visible.

Metal Platform Stair Access Stand

Skylarc Ref Y168641

Standing platform height is 1170mm
Platform surface measures 800mm by 1000mm
Frame is constructed from metal
Four step access with metal stair treads
Fitted with handrails on both sides of stairs
Guard rails installed around platform
Open base for forklift or floor anchoring access
Unit appears to be freestanding
No wheels fitted to the base

APV Plate Heat Exchanger FP14 2009

Skylarc Ref M109910

Manufacturer APV New Zealand Ltd
Type FP14
Year 2009
Serial Number 060606 8292
Drawing Number N0714
Heat transfer surface area not specified
Working pressure 6 bar
Test pressure 10 bar
Maximum working temperature 101°C
Nominal capacity not specified
Installed on a metal support frame
Two flanged pipe connections visible
One side fitted with a pipe and a rusted component

6x Bullivants Flat Webbing Slings, 2-Metre, 2000kg Each

Skylarc Ref U168325

6x Bullivants Flat Webbing Slings.
All are 2-Metre lengths with 2000kg Capacity.
All Manufactured in 2016.
New in sealed manufacturer packaging.
See our other listings for more lots of these slings.
Photos are indicative.

BraunAbility Wheelchair Lift L918IB3351RP-2TC

Skylarc Ref D168646

Manufacturer is The Braun Corporation.
Model number L918IB3351RP-2TC.
Manufacture date is 8/7/2017.
Maximum lifting capacity is 800 lbs.
Maximum lifting capacity is 363 kg.
Full load current is 70 amps max.
Emergency stop button control is present.
Serial number is 17080701039.
BraunAbility branding on side panel.
Lift base and mesh platform construction.
Electrical warning symbol present on control box.

Lifeguard LG6.6PSOA Portable Socket Outlet Assembly

Skylarc Ref Q168607

Model number LG6.6PSOA10
Voltage 230 Vac
Frequency 50/60 Hz
IP66 fire hose and dust rated
Rated sensitivity 30 mA
Rated overload current 10 A
Rated wattage 2300 W
Four ABL 250V 10A outlets
Protected by RCD
Yellow plastic case
Supplied with attached power cord
Manufacturer Jackson Electrical Industries Ltd
Complies with AS/NZS 3190 and AS/NZS 3012

Juki DDL-5550N-3 Industrial Sewing Machine

Skylarc Ref W110102

Juki DDL-5550N-3 industrial sewing machine
Machine is mounted on a dedicated work table with casters
Includes thread stand for two spools
Foot pedal operated
Integrated control box beneath the table
230V AC power plug attached
Main switch and wiring attached to table frame
Made in Japan
Model plate present on machine bed

Bottle Jack w/ Pneumatic Actuator

Skylarc Ref T167050

Bottle Jack w/ Pneumatic Actuator.
Unknown brand, model, and lifting capacity.
Height from approx to approx 270mm.
A Pneumatic Cylinder with air hose is attached for apparent use via that method
Manual Hydraulic lever tested and functions normally but not tested under load. Pneumatic Cylinder not tested.

Metal Workbench with Black Steel Bench Vice

Skylarc Ref H168676

Metal workbench with rectangular top.
50mm Tubular steel frame construction.
Surface shows wear and discolouration.
Bench vice is black Steel brand, opens to 150mm with a jaw width of 150mm
No visible identifying model numbers.

Stainless Steel Pipe Fittings and Valves Pallet

Skylarc Ref Z110001

Mixed stainless steel pipe fittings and valves on one pallet
Includes straight pipes and various elbow sections
Several blue-handled ball valves present
Contains some flanged fittings and connectors
One flowmeter with digital display included
Some manual butterfly or ball valves included
Assortment of tri-clamp and threaded connections visible
Includes pipe sections with welded and threaded joints
Condition and size of individual parts vary
Pipe diameters vary across the pallet
All items as shown in the provided images

Stack of Stainless Steel Sheets

Skylarc Ref F109903

Stack of stainless steel sheets wrapped in plastic film
Each sheet includes a
Top surface features raised anti-slip pattern
Multiple covers stacked together as a single lot

Large Industrial Heating Band Clamp 230V AC 280W

Skylarc Ref O168683

Large industrial heating band clamp
Marked 230V AC 280W
Manual screw adjustment with red handwheel
Braided electrical cord with three-pin plug
Metal construction
Clamp width 100mm
Electrical rating 230V AC 280W
Strapped to wooden pallet
Single Phase

Industrial Ozone Generator Cabinet

Skylarc Ref F167010

Industrial ozone generator cabinet
Model: QLA-100G
Voltage: 220V / 50Hz single phase, 10A plug
Current: 5.5A
Rated power: 1.2kW
Stainless steel construction
Digital timer and current/voltage display
Ozone consistency control knob
Separate ozonizer and air pump switches
Cabinet size: 500 x 400 x 1200 mm
Net weight: 44kg
Three cooling fans on the side panel
Yellow inlet/outlet hoses with quick-connect fittings included
Suitable for large room purification or industrial applications
Manufacturer not identified

Jetfire DC30 Direct Fire Industrial Heater

Skylarc Ref Y168355

Jetfire DC30 Direct Fire Industrial Heater.
Uses diesel or kerosene.
30kW output.
Unit has had its cover removed as all bolts are missing. Rear fan cover is detached. Unknown if unit is operational or complete, see photos.

Oxy Acetylene Welding Kit on Trolley with Gauges and Torch

Skylarc Ref T168636

Oxy acetylene welding kit mounted on a metal trolley
Includes gas cylinder
Fitted with Steadyflo and Proflo pressure regulators
Multiple pressure gauges visible on the cylinder
Includes welding hoses
Welding torch included
Protective face shield included
Two large steel wheels on trolley
Steel base tray for stability
Torch handle and controls shown
Mask and other accessories visible on trolley

Ullrich Aluminium 2.9m Ladder

Skylarc Ref K168627

Manufacturer is Ullrich Aluminium
Made in New Zealand
Step ladder design
Approximate height is 2.9 metres
Constructed from aluminium
Includes stabiliser bar at the base
Model or serial information not specified
No accessories included

Stainless Steel Tank on Stand

Skylarc Ref I109932

Stainless steel tank with cylindrical shape
Mounted on a four-legged steel stand
Includes bottom outlet with valve fitting
Tank appears to have a flat top with central access port
Tank shows visible signs of exterior surface oxidation
No agitator or internal fittings visible
Approximate capacity and dimensions not specified
No visible manufacturer labels or markings
Outlet and fitting style visible in close-up image
Suitable for industrial or process applications where stainless tanks are required

WEG W22 Electric Motor 1.1kW 3 Phase Electric Motor, as New

Skylarc Ref S168323

WEG W22 High Efficiency E3 electric motor
Model W2000110B35
Power rating 1.1kW
Manufactured 2015.
Mounting B3R(E)
Degree of protection IP66
200mm Diameter mounting bezel.
19mm diameter shaft.

Power supply three phase
Voltage 220-240V/380-415V/440-460V
Frequency 50Hz and 60Hz
Speed 2810-2840 rpm at 50Hz 3450 rpm at 60Hz
Frame material iron.
Color RAL 6002
Enclosure closed.
Efficiency 84.9 percent at 1.5HP
Serial number 1028360309
Includes manual
Box weight shown as 16.425kg
Motir is as new unused with partial manufacturer plastic wrapping still in place. Dusty from open box storage.

WEG W22 Electric Motor and Renold PH160 Gearbox

Skylarc Ref A168617

WEG W22 High Efficiency electric motor.
Motor model: 3~132S.
IP66 rated.
Motor power: 5.5kW.
Motor voltage: 380-415V or 660-690V (Y/D configuration).
Motor speed: 1460 RPM at 50Hz.
Motor efficiency: 90.9% (NEMA EFF).
Motor weight: 89kg.
Gearbox: Renold PH160.
Gearbox ratio: 63.1:1.
Gearbox serial number: 8273.
Gearbox supplied and serviced by Renold New Zealand Ltd.
Gearbox uses Mobil SHC 632 gear oil.
Electrical cable fitted with multipin industrial plug.

Assortment of Stainless Steel Ladders

Skylarc Ref I168625

Multiple stainless steel ladders included.
Variety of designs and sizes visible.
Constructed from round and square stainless steel tubing.
Ladders feature pre-drilled mounting plates at ends.
Some ladders include handrails on one or both sides.
Units are arranged on pallets for storage.
Photos show the total quantity and types

SEW-EURODRIVE DRN100LS4/BE5HF/FG Electric Motor with Gearbox

Skylarc Ref D110213

SEW-EURODRIVE electric motor with attached gearbox.
Model DRN100LS4/BE5HF/FG.
Rated power 2.2 kW S1.
Rated current 230/400 V Delta/Star.
Inverter duty VPWM 3~ IEC60034.
Frequency 50 Hz.
Rated speed 1450 rpm.
Thermal class 155(F).
Efficiency at 100 percent load 86.9 percent.
Efficiency at 75 percent load 87.5 percent.
Efficiency at 50 percent load 86.4 percent.
Protection rating IP66.
Cos phi 0.76.
IE3 classification.
Year of manufacture 2018.
Gearbox attached with large output gear.
Mounting base with slots for fastening.
Wiring is present but cut at ends.
Total weight marked on motor plate 37.928 kg.
Gearbox and motor casing appear to be cast metal construction.

3 x Faulty Pallet Movers

Skylarc Ref O168631

Three pallet movers included in this lot.
One orange Jet brand pallet mover.
One yellow pallet mover.
One white Crown brand pallet mover.
None of the pallet movers have a functioning lift system.
All units have standard manual handles.
Condition as shown in photos.

Rotating / Swivel Bench Vice

Skylarc Ref C168333

Rotating / Swivel Bench Vice.
Unknown brand/model.
125mm wide flat jaws with pipe jaws on opposing end, see photos.
Overall size approx 410x200x235mm
Rotatable base and jaws.
Surface rust from storage, jaws open smoothly.

Steel Fabricated Lifting Attachment

Skylarc Ref E168621

Steel rectangular tube construction.
Two parallel base beams with welded cross member.
Central extending arm with welded gusset reinforcement.
Two large adjustment screws with knurled round handles at base ends.
Lifting shackle attached to end of main arm.
Welded assembly throughout.
No brand or model identifiable.
Finish is raw or lightly brushed steel.

2x Spools of EDM Molybdenum Wire, 0.18mm x 2000m, New

Skylarc Ref Y164975

2x Spools of EDM Molybdenum Wire.
Both spools have 0.18mm diameter Wire with 2000 metre spool length.
90g spool weight.
For use with precision EDM cutting machines
Manufacturing Date: June 4, 2019.
Manufacturer: Quanzengcheng Zhaotang Guangming (Shandong) Co., Ltd.
Both Spools are new and Vacuum sealed.

Brother DB2-B737-413 Mark II Industrial Sewing Machine

Skylarc Ref D110109

Brother Industries Ltd model DB2-B737-413 Mark II.
Made in Japan.
Brother Exedra E-40 control panel installed.
Includes table with mounted controls and ruler.
Foot pedal and knee lever attached to stand.
Multiple control buttons and indicator lights visible on E-40 head unit.
Power input and cabling mounted under the table.
Various attachments and a lamp are included and shown on the table.

Industrial Ozone Generator Cabinet

Skylarc Ref G167011

Industrial Ozone Generator Cabinet
Model: QLO-10G
Stainless steel construction
220V / 50Hz, 400W rated power
Current: 1.82A
Single phase, 10A plug
Oxygen flow: 2-3L/min
Digital timer and programmable controls
Front panel with voltage and current display
Adjustable ozone consistency control
Ozonizer and air pump with independent switches
Integrated flow meter (up to 5 L/min)
Three rear-mounted cooling fans
Ozone output connection at rear
Overall size: 500x400x730mm
Weight: 32kg

Schneider Electric SLIM SPN Vigi Distribution Board

Skylarc Ref O110146

Schneider Electric SLIM SPN Vigi unit
Distribution board housed in a lockable enclosure
Enclosure features gasket seal and latch closures
Contains Schneider Electric main switch and RCBO protection
Ratings: 230V 1P+N 10-25A C Curve 6kA Type A 30mA
AS/NZS61009-1 and IEC 61009-1 standards compliance
RoHS compliant
Includes dual power outlet with switch
Internal earth and neutral busbars installed
Wiring labels provided for DC Earth AC and Power connections
Test report numbers T501891d and T502288a
Certification reference A/12958EA
Enclosure constructed of light grey material with wall mounting points
Protective cover over circuit protection devices
Supplier identification visible on internal documentation
No additional accessories or cables supplied

Assorted Partial Cleaners, Paints, Oils, Herbicides, & More

Skylarc Ref X168354

Assorted Partial Cleaners, Paints, Oils, Herbicides, & More.
All are partials containers with widely varying levels of product remaining in each.
Contents have not been inspected.
Containers up to 20L size.
See photos for details on types, brands, included.

Stone Coat Countertop Epoxy Resin & Hardener Set

Skylarc Ref F166906

Stone Coat Countertop Epoxy Resin & Hardener Set.
Clear colour.
3.79L bottles each.
New unused in plastic wrapping.

Pentair Jung Pumpen MultiStream-Pumpe 300/2 B6

Skylarc Ref Y168615

Brand: Pentair Jung Pumpen
Model: MultiStream-Pumpe 300/2 B6
Serial Number: JP00471
Pump type shown as centrifugal on casting
Electric motor attached
GR Spa motor code: XE2004.01
GR Spa motor rated 400/440V
Motor 50/60Hz 0.56A
Motor speed 2320/2520 rpm
Class IP55
HYDAC heat exchanger/cooler included
Power cable with attached connector included
Wiring tails supplied in plastic bag
Made in Germany (pump)
GR Spa motor made in Italy

Singer 591UX320GF Industrial Sewing Machine

Skylarc Ref B110107

Singer industrial sewing machine
Model 591UX320GF
Cat No. 1955
Includes electronic stitch pattern controller P/N 419030
Foot pedal control
Mounted on metal frame table with castors
Includes two thread spool stands
Table has wood trim edges
Sewing patterns displayed on controller unit
Power cord and switch mounted under table
Includes thread catcher bag
Made in Japan

Juki DDL-5550N-7 Industrial Sewing Machine

Skylarc Ref N110119

Juki DDL-5550N-7 industrial sewing machine.
Made in Japan.
Unit includes integrated table.
Built-in motor located under the table.
Power cable and plug visible.
Table features an extended wooden side panel.
Machine head serial number LYM5C931.
Two spool holders at rear of table.
Lamp attached to sewing area.
Includes attached pin cushion on machine head.
Dual power outlets mounted on frame base.
Model and manufacturer plate on machine body.

L-Shaped Corner Desk

Skylarc Ref G168571

L-shaped corner desk with rustic wood-look finish and sturdy black metal frame
Features an elevated additional shelf (900mm x 200mm x 160mm) ideal for monitors or accessories
Spacious work surface suitable for home office, study, or workspace
Modern industrial design complements a range of interiors
Open leg design provides ample legroom and flexibility in positioning
Desk panels feature a rich texture and natural grain pattern for a stylish look
Sturdy construction for reliable daily use

SEW-EURODRIVE K97 DRE100M4BE5/DH Gearmotor

Skylarc Ref Y110234

Manufacturer SEW-EURODRIVE
Model K97 DRE100M4BE5/DH
Part number 22.2237597001.0001.10
Rated power 2.2 kW S1
Frequency 50 Hz
Input speed 1425 rpm
Output speed 15 rpm
Power factor Cos φ 0.80
Thermal class 155(F)
Voltage 220-242V Delta or 380-420V Star 3 phase
Gearbox oil CLP 220 Mineral Oil
Weight 96.80 kg
Mounting hardware included as shown
Large output gear fitted
Serial number on plate 22.22105793.001.08.310

SEW-EURODRIVE K97 DRE100M4BE5HF Gearmotor

Skylarc Ref W110232

SEW-EURODRIVE gearmotor
Model K97 DRE100M4BE5HF
Serial number 22.2214866101.0001.15
Power 2.2 kW S1
Rated speed 1425 rpm input 15 rpm output
Voltage 220-242V or 380-420V
Current 8.20A or 4.70A
Three phase
Efficiency 85.4 percent IE2
IP66 rated enclosure
Thermal class 155(F)
Cos phi 0.80
Torque 96.80 Nm
Maximum torque 1430 Nm
Lubricant type CLP 220 mineral oil 20.00 liters
Weight 202 kg
Gearmotor made in New Zealand

Stainless Steel Processing Vessel

Skylarc Ref L168628

Stainless steel construction
Two horizontal cylindrical chambers
Each chamber has clamp-secured end caps
One chamber features a cone bottom with a butterfly valve outlet
Butterfly valve has a blue handle
Tri-clamp fitting on top of one chamber
Angled stainless steel infeed chute
Chambers are mounted on a rectangular steel frame
Flanged fittings present on both ends of one chamber
Internal supports visible in frame cavity
Unit is pallet-mounted for transport
No electrical connections are visible
No manufacturer identification visible
Dimensions and capacity are not specified

Red Benchtop Sandblasting Cabinet

Skylarc Ref G168675

Red benchtop sandblasting cabinet constructed from metal
Features two glove ports with internal gloves installed
Clear top viewing window with two locking latches
Internal blast gun and hose included
Fits small to medium workpieces for surface preparation
Air line connection port located on side
On off switch located on exterior side panel
Suitable for abrasive blasting with compatible media
Warning label attached to front panel
Internal filter element visible inside cabinet
Power connector port on rear side
power cable is missing
Mesh work platform inside the cabinet
Rubber feet fitted to metal legs

Brother CB3-B917-1 Button Sew Machine

Skylarc Ref A110132

Brother CB3-B917-1 industrial sewing machine
Button sew type
Manufacturer: Brother Industries Ltd
Made in Japan
Mounted on work table with caster wheels
Fitted with adjustable lamp
Includes thread holder
Power switch fitted to table
Serial number 1024 on machine plate
Control pedal fitted to base

Electronics Cabinet with Raspberry Pi

Skylarc Ref S167985

Electronics cabinet with lockable front door and clear viewing panel
Includes Raspberry Pi single-board computer (shown with sensor/board attached)
Fitted with a secure multi-outlet power strip inside
Sturdy all-metal construction with wall-mount brackets
Front door features keyed cam lock (key not included)
Cabinet dimensions approx 700mm (H) x 520mm (W) x 240mm (D)
Great for network equipment, control systems, or smart hub installations
Interior is mostly empty—ample space for extra gear
Comes wired and ready for your own custom electronics projects

Devon Platform Scale 45kg

Skylarc Ref S168635

Devon brand platform scale
Maximum capacity is 45kg
Dial reads up to 45kg in 0.2kg increments
Large round analog dial display
Flat metal weighing platform
Metal frame construction
Visible calibration label on column
Mechanical operation with no visible power supply
Freestanding floor unit

WEG Electric Motor

Skylarc Ref I110244

WEG brand electric motor.
Three groove pulley attached to shaft.
Green metal housing.
Terminal box with WEG marking.
Housing and external components show visible rust and paint wear.
Motor cable present with exposed conductor ends.
Mounting feet with bolt holes integrated to housing.
No further specifications or rating plate details are visible.

Europlan 4 Door Locker Unit

Skylarc Ref V167988

4-door steel locker unit in beige
Brand: Duraplan
Individual doors labelled 73 to 76
Internal shelf and hanging rail in each compartment
Lockers measure approximately full-body height
No keys included
One door does not latch shut and has a padlock hasp/strap for closure
Some cosmetic marks, scratches, and existing name labels
Ideal for school, gym, or workplace storage
All doors have ventilation slots at the top and bottom

PB Tech Raspberry Pi4 Starter Pack

Skylarc Ref Z167420

PB Tech Raspberry Pi 4 Starter Pack Kit No. SEVRBP0274
Raspberry Pi 4 Model B (8GB LPDDR4 RAM)
64-bit quad-core Cortex-A72 processor
Includes official Raspberry Pi red/white case
Official Raspberry Pi 3A USB-C power supply (AU plug, white)
32GB microSD card preloaded with NOOBS (OS)
Official Raspberry Pi micro-HDMI to HDMI cable
Power switch cable included
2 micro HDMI ports (supports up to 4Kp60), 2 USB 3.0 ports, 2 USB 2.0 ports
Gigabit Ethernet port, 802.11b/g/n/ac wireless, Bluetooth 5.0
New and unused, box only opened for photos

Yao Han F300A Bag Closing Sewing Machine with Conveyor

Skylarc Ref Z110261

Yao Han brand sewing machine.
Model F300A.
Mounted on a metal conveyor system.
Powered by an electric motor.
Includes foot pedal control.
Equipped with thread spool holders.
Control panel mounted on the side of the conveyor.
Large plug connector attached to power cable.
Bag closing sewing head present.
Serial number as shown in photo.
Made by Yao Han Industries Co Ltd.
Made in Taiwan.

Industrial 3-Phase Pump Assembly

Skylarc Ref O168345

Industrial 3-Phase Pump Assembly.
Unable to locate an ID plate so brand/model and specs unknown.
9-wire cable attached.
Heavily rusted exterior.
Operational condition is unknown.

Kerastase Paris Chromologiste Shampoo, Masque, & Blow Dry Set

Skylarc Ref O168449

Kerastase Paris Chromologiste Shampoo, Masque, & Blow Dry Care Set.
Régénérant youth revitalizing shampoo 250 ml
Kérastase Paris Chronologiste Masque Intense Régénérant youth revitalizing hair masque 200 ml.
Kérastase Paris Chronologiste Thermique Régénérant youth revitalizing blow-dry care 150 ml.
Infused with Abyssine and Hyaluronic Acid.
Shampoo is formulated for hair and scalp.
Hair masque is formulated for hair and scalp.
Leave-in blow-dry care is formulated for lengths and ends.
All products are contained in original Kérastase Paris Chronologiste packaging.

Ozone Generator

Skylarc Ref C167995

OdorStop Ozone Generator model OS4500UV2
Ozone output adjustable (Low/Medium/High)
Timer control up to 12 hours, hold and off settings
Warning: Do not use ozone in occupied spaces
120V 60Hz 94W power requirement (US-style plug fitted)
Powered by standard US mains plug (see photo)
Robust blue metal housing with carry handle
Back panel with accessible fuse
Made in China
Physical condition as per photos

Click Portable Air Conditioner

Skylarc Ref Q167411

Click Portable Air Conditioner, model CPAC1907-C
Manufactured 06/2023
Cooling capacity: 7000 BTU (2.06kW)
Rated power input: 792W
Air flow: 300m³/h
Max dehumidifying capacity: 1.5L/h
Operates in cool, dehumidify, and fan modes with sleep and timer functions
Digital control panel with LED display, adjustable fan speed
Uses R290 refrigerant, 130g charge
Noise level: ≤65dB(A)
AC power supply: 220-240V~50Hz
Remote and venting/drainage accessories not included
Some cosmetic marks present but unit operates normally

Industrial and Commercial Fans 318 NWR 2.2kW Fan

Skylarc Ref W168691

Manufacturer is Industrial and Commercial Fans Ltd Auckland New Zealand
Model 318 NWR
Serial number C05294
Motor rating 2.2 kW
Motor is 2 pole
Fan speed 2875 RPM
Pitch angle 28 degrees
Equipped with Monarch 3-phase induction motor
Motor power 2.2 kW
Motor operates at 50 Hz
Motor RPM 2875
Motor insulation class F
Voltage rating 380-415 V
Monarch motor frame 90L-2
IP55 rated
Motor manufactured by Teco Australia Pty Ltd
Fitted with flexible conduit for wiring
Exposed wire ends visible

Industrial Submersible Pump

Skylarc Ref J109907

This is an industrial submersible pump.
The pump body is constructed from metal.
There is extensive surface corrosion visible on the exterior.
Pump features a large flanged outlet.
Flanged outlet shows visible corrosion and oxidation.
There are several exposed and frayed wire ends on the attached cable.
No manufacturer label or model details are visible.

Tooline BG-200H 200mm Bench Grinder

Skylarc Ref P168684

Model BG-200H
Brand Tooline
Type 200mm bench grinder
Motor power 900 watt
Voltage 230v
Frequency 50Hz
Wheel size 200 x 30 x 32mm
Single phase plug attached
Emergency stop button on base
Made in China
CE marked

RS Pro RS-96 Air Quality Meter for Humidity

Skylarc Ref I167429

RS Pro RS-96 Air Quality Meter for Humidity and particle detection
Measures PM2.5 and PM10 particle sizes with real-time display
Integrated temperature and relative humidity sensor
Clear colour LCD screen for easy readings
User-friendly interface with dedicated buttons for power, memory, settings, and measurement
Portable handheld design with stand and belt clip for versatile use
Condition: Very light signs of usage, overall excellent
For full specifications see manufacturer link: https://nz.rs-online.com/web/p/air-quality-monitors/1558903

Industrial Stainless Steel Scrap and Parts Bin

Skylarc Ref Q109940

Metal bin containing mixed industrial stainless steel parts.
Assortment includes tubing sections, flanges, and angled steel panels.
Multiple steel valves and fittings are visible in bin.
Assorted sheet metal and brackets included.
Components appear to be cut or removed from processing equipment.
Material in bin consists largely of stainless steel with visible rust on some items.
Bin is mesh steel construction with open top and metal framework.
Contents as shown in photographs only.
Estimated bin dimensions are approximately one cubic metre.
No further specifications or part numbers confirmed.

Brother DB2-B715-903 Plain Sewer and Overlocker Table Unit

Skylarc Ref F110111

Brother DB2-B715-903 industrial sewing machine installed on table.
Industrial overlocker machine installed on same table.
Table fitted with thread stands and metal frame on wheels.
Both machines powered by under-table electric motors.
Two separate pedal controls attached to each motor.
Main power plug is 20A 500V PDL branded industrial type.
Brother DB2-B715-903 serial number 1020 visible on ID tag.
Control boxes for both machines mounted beneath the table.
Thread guides and spare thread spool holders included on table.
No accessories or manuals included in photos.

Milling Clamping Kit

Skylarc Ref A158256

jiunn liang Clamping Kit for Milling Machine

see photos for more details

Weg W22 High Efficiency Electric Motor with Pump Assembly

Skylarc Ref W109920

Weg W22 High Efficiency electric motor
Motor model TE1BF0XO
Motor rating is 1.5kW
Rated speed is 2810 to 2840 RPM at 50Hz
Motor voltage is 380V Delta or 415V Star for 50Hz operation
Current rating is 2.23A at 380V or 2.29A at 415V
Three phase connection
IP66 enclosure
Efficiency class is 84.9 percent at full load
Date of manufacture is April 2016
Motor includes attached pump assembly
Includes fitted power cable with four-pin industrial plug
Pump assembly is coupled directly to motor
Mounted on a metal base frame

BraunAbility Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref J168652

Manufacturer BraunAbility
Model number L9181B3351RP-2TC
Serial number 15111600384
Manufacture date 11/16/2015
Maximum lifting capacity 800lb
Maximum lifting capacity 363kg
Includes mesh platform and safety handrails
Emergency stop button present
Operational control panel with up and down switch
Electric lift with current draw listed as 70 Amps Max
Located on lift structure are usage instruction labels

Juki DLN-5410-6 Industrial Sewing Machine

Skylarc Ref X110103

Juki DLN-5410-6 industrial sewing machine
Equipped with Juki SC-120 control panel
Table included with machine
Pedal operated foot control
Includes thread stand
Juki made in Japan
Three-pin industrial plug fitted
Power cord present
Maintenance log indicates recent check of presser bar and throat plates
Control panel includes function switches and dials
Motor and drive components visible beneath table

4x Bullivants Flat Webbing Slings, 2-Metre, 2000kg Each

Skylarc Ref W168327

4x Bullivants Flat Webbing Slings.
All are 2-Metre lengths with 2000kg Capacity.
All Manufactured in 2016.
New in sealed manufacturer packaging.
See our other listings for more lots of these slings.

3.8m Ladder

Skylarc Ref J168626

Ladder length is 3.8 metres.
Constructed from metal with yellow side rails.
Rungs are round and evenly spaced.
Includes attachment plates at one end.
Physical condition as shown in images.

4x Bullivants Flat Webbing Slings, 2-Metre, 2000kg Each

Skylarc Ref V168326

4x Bullivants Flat Webbing Slings.
All are 2-Metre lengths with 2000kg Capacity.
All Manufactured in 2016.
New in sealed manufacturer packaging.
See our other listings for more lots of these slings.
Photos are indicative.

Steel Storage Box with Assorted Tools

Skylarc Ref O168657

Steel storage box shown with hinged lid.
Box secured with two chain loops on the front.
Box is painted grey with visible rust and wear.
Box is positioned on a timber pallet base.
Contents include assorted hand tools.
Visible tools include shovels, garden rakes, and yard brooms.
Quantity and condition of individual tools unknown.
Entire contents included as shown.

Heavy Duty Steel Bracket Assembly

Skylarc Ref R168608

Steel fabrication bracket assembly shown.
Made from rectangular steel tube sections.
Welded construction with steel plates and bolts.
L shaped design with two base arms and vertical upright.
Extended horizontal arm with mounting bracket at end.
Base includes chain and bolt mechanisms.
Surface shows welded joints and structural reinforcement.
No manufacturer or model identification visible.
No electrical or moving parts identified.

Micro Jig Tapering / Jointing Jig + Grr-Rip Block

Skylarc Ref J167092

Micro Jig Tapering / Jointing Jig.
Measures approx 635x205mm.
Also includes Micro Jig Grr-Rip Block, measures approx 230x90mm.

Stainless Steel Mixing Tank with WEG Motor and Radicon Gearbox

Skylarc Ref W168639

Stainless steel cylindrical mixing tank
Fitted with internal agitator blades
WEG 3-phase induction motor installed
Motor model 90S-1192
Motor power 1.1 kW
Motor speed 1430 rpm
Motor voltage 415V
Motor current 2.9A
IP55 rated motor enclosure
Radicon Series A gearbox by David Brown
Gearbox ratio R51D
Fitted with Schneider Electric LE1D12N7 control unit
Control unit rated IP65
Tank fitted with multiple inlet and outlet valves
Three-phase power plug fitted
Horizontal agitator shaft visible through top hatch
Circular steel tank with welded supports
Circular top lid with lifting eyes

Pallet of Electrical and Electronic Parts and Components

Skylarc Ref N110145

One pallet containing multiple boxes of electrical and electronic parts and components
Box of assorted toggle switches in bags
Box containing HWR Contactor Mains ON/OFF switch units
Enclosures and metal boxes with cables attached
Box of assorted metal brackets and clamps
Box of grey painted metal mounting brackets
Box with multiple SMD Fuse Kit 469 3 x Bus Bar Fuses 3 x 16A Links
Box with cable assemblies and power cords
12V Medical PSU visible in cable box
Assorted terminal blocks and connectors in cable box
Plastic parts with metal latches
Boxes labelled FIBOX and Powerbase are present

Olympia Splendid Aquaria S1 16P Dehumidifier

Skylarc Ref U167415

Model: Aquaria S1 16P AU, SN: PD004370680
Olympia Splendid Aquaria S1 16P dehumidifier
Removes up to 16L of moisture per 24 hours
Double air filter system for improved air quality
Laundry mode for faster drying of clothes indoors
Uses eco-friendly R290 natural refrigerant
300W power, operates on 220-240V, 50Hz
Digital control panel with adjustable settings
Mounted on wheels for easy mobility
Approximate tank volume as pictured
Shows light signs of use, operates normally
Includes 3-year replacement warranty (as per sticker)

Pentair Jung Pumpen 35/2 B24 Submersible Pump

Skylarc Ref N168344

Manufacturer is Pentair Jung Pumpen.
Model is 35/2 B24.
Pump type is 35/2 B24.
Machine number is 8080222.
Motor type is D 90-7110 C.
Three phase 230 volt.
Rated current 11.5 amp.
Maximum flow rate is 126 m3/h.
Maximum head is 18 m.
Protection class is IP68.
Made in Germany.
Equipped with a blue and yellow float switch labeled MAG3.
Includes attached power cable and rope.
Stainless steel 90-degree discharge elbow attached.

RXP RX Plastics Chemical Storage Tank 1154GAL

Skylarc Ref J109933

Manufacturer is RX Plastics Ltd.
Location listed as Ashburton.
Certified as a chemical storage tank.
Design service temperature is 23 degrees Celsius.
Tank design specific gravity is 2.0.
Maximum design pressure is 10.3 kPa.
Maximum service life is 10 years.
Chemical reduction factor is 1.1.
Certified to AS/NZS 4766.
Compliant with HSNO COP12.
Indoor or outdoor use allowed.
Vent fittings visible in the lid and side of the tank.
Plastic construction with a removable screw top lid.
The tank has a visible manufacturer's compliance label.
Tank appears to be cylindrical with a flat base.

Juki DDL-555-5 Industrial Sewing Machine with MC-210 Controller

Skylarc Ref W110128

Juki DDL-555-5 industrial sewing machine.
Juki MC-210 controller attached.
Single needle machine.
Table included in setup.
Foot pedal operated.
Original Juki electric motor mounted below table.
Three-pin industrial electrical plug fitted.
Manufactured by Tokyo Juki Industrial Co. Ltd.
Made in Japan.
Sewingtime (N.Z.) Ltd. ruler fixed to front edge of table.

Lot of Keystone Pneumatic Actuators and Stainless Valves

Skylarc Ref Y109922

Bulk lot of pneumatic actuators and stainless steel piping components.
Includes multiple Keystone pneumatic actuators with visible branding.
Assorted stainless steel pipes and fittings are present.
Several solenoid valves and ball valves are included.
Components include various lengths and diameters of pipe.
Parts include some wired and non-wired actuator units.
Items are loose and contained in a large white bulk bag.
Quantity and exact specifications of items are not identified.
All items shown are included in the lot.

Kawasaki 3/4" Drive Air Imoact Wrench KPT-285P

Skylarc Ref U167051

Kawasaki 3/4" Drive Air Imoact Wrench.
Model KPT-285P.
Includes33mm and 41mm sockets.
Protective Rubber jacket on Wrench body.

Moduline Curved Conveyor Belt with SEW-Eurodrive Motor

Skylarc Ref L110247

Moduline curved conveyor belt
Manufactured by Henley Industries
Belt width is 300mm
Equipped with SEW-Eurodrive (N.Z.) Ltd motor
Motor type KAF 30 DT71D4
Motor rated at 0.25kW
Motor voltage 230D 400Y
Motor speed 660 82 RPM
Motor IP rating 55
Fitted with orange industrial power plug
Mounted on stainless steel frame

Jonesco Black Plastic Storage Box with Red Lid

Skylarc Ref G110216

Jonesco brand storage box.
Black plastic body with a red plastic lid.
Rectangular shape with two latches on the front for securing the lid.
Lid has two transparent panels.
Made from polyethylene plastic as indicated by the PE recycling mark.
Embossed Jonesco branding on the inside of the lid.
Handles present on each side of the lid.
Designed for general storage purposes.
Lid is hinged for easy opening and access.

Honeywell SCM3000 PLUS F Series Coriolis Flow Meter

Skylarc Ref Q168321

Honeywell SCM3000 PLUS F Series Coriolis flow meter
Order code CMFS25-FTA01A13B1F
Serial number 06444436
Power supply 85-260VAC 50-60Hz
Power consumption 15VA
Enclosure rating IP67
Process connection M20x1.5
HART protocol supported
Output 1-OUT HART 1-OUT
Pressure rating 375 psig
Material 1.4533
Temperature range 4.75°C
Made in Germany
Type SCM 3000 PLUS A/F/M
EX protection EEx de ib IIC T2-T6
BVS 97.D.2032 X
Display screen with function buttons.

Milesight Indoor Ambient Monitoring Sensor

Skylarc Ref U167987

Milesight AM319-915M Indoor Ambience Monitoring Sensor
Real-time monitoring and display of CO₂, PM2.5, PM10, O₃, temperature, humidity, and TVOC
Large, easy-to-read digital display
CO₂ range (example shown): 785 ppm
PM2.5 and PM10 (example shown): 20 µg/m³ each
O₃ level (example shown): 0.02 ppm
Temperature (example shown): 7.7°C
Humidity (example shown): 76%
Measures total volatile organic compounds (TVOC)
Model: AM319-915M
Power input: 5V – 1A
FCC ID: 2AYHY-AM300
Includes wall-mountable unit with visible QR code for setup
General signs of minor use, no packaging included

Tarlton Electric 7.5kW 380V Electric Motor with Pump Housing

Skylarc Ref X110233

Tarlton Electric motor
7.5kW power rating
380V voltage
16 amps
2900 RPM
Frame D180
Drive end bearing type 6208
Non-drive end bearing type 6208
Date marked 14/12/15 on nameplate
Includes stainless steel pump housing
Pump housing features threaded and clamp fittings
Electric motor is flange mounted with lifting eye

Stainless Steel Industrial Mixing Kettle with Motorised Agitator

Skylarc Ref S168609

Stainless steel mixing kettle.
Motorised agitator installed.
Schneider Electric control box attached.
Includes integrated drain valve at base.
Large hand wheel for tilting operation.
Mounted on steel frame.
Equipped with flexible hose connections.
Agitator blades visible inside kettle.
Electric motor fitted on top of frame.
Power cable attached.
No information provided on capacity or power rating.

Lowara C 200/55/A Electric Centrifugal Pump

Skylarc Ref G168337

Manufacturer Lowara
Model C 200/55/A
Made in Italy
Electric centrifugal pump.
Motor voltage 220/380V
3 phase
Power 3.6kW
Current 11/6.6A
Flow rate 75 to 200 litres per minute.
Max head 59 to 46 metres
Frequency 50 Hz
IP 44 rated motor.
Pump and motor mounted on a metal base.
Fitted with wiring cable.
Stainless steel pump housing.

Glass & Stainless Steel Display Cabinet

Skylarc Ref P168320

Glass & Stainless Steel Display Cabinet.
Sliding glass doors on one side.
LED light strops taped to two upper corners, these are untested.
Scratching and usage marks on surfaces from previous cafe use.

Pegasus E32-430 Industrial Overlocker Sewing Machine

Skylarc Ref P110121

Pegasus industrial sewing machine.
Model E32-430.
Specification 516-233-5X5.
Mounted on a work table with metal frame.
Includes attached lamp unit.
Fitted with a standard 3-pin plug for 230V power supply.
Comes with multi-spool thread stand.
Foot pedals included for machine operation.
Power extension cord with multiple sockets is present.

Radford Air Compressor with GEC Induction Motor

Skylarc Ref Z168694

Radford air compressor unit.
Compressor head marked Radford CH CH NZ.
GEC induction motor made in England.
Motor rated at 2 horsepower.
Motor operates at 400 volts 3 phase.
Motor current draw is 3.3 amps.
Motor speed is 1410 RPM.
Pressure switch is Danfoss Trykafbryder type PS-60467.
Pressure switch range is 100-170 PSI.
Pressure switch operates at 6A 500V AC or 6A 220V DC.
Tank is horizontal cylindrical steel construction.
Fitted with a pressure gauge and valve.

Plastic Grating Panels Assorted Sizes

Skylarc Ref E110214

Assortment of plastic grating panels
Multiple yellow panels with square grid construction
Includes one raised green panel set in a metal frame with adjustable feet
Panels constructed from reinforced plastic
Various thicknesses and dimensions visible
Yellow grating panels have a square mesh pattern
Green mesh section is supported by a metal frame with four feet
Suitable for industrial or commercial flooring and walkways
Panels and frame shown in photos

Aut2o Torq Steel Loading Ramps

Skylarc Ref J167560

Unknown capacity

Oki C8600/C8800 Series Colour Laser Printer Toners

Skylarc Ref A167109

Oki C8600/C8800 Series Colour Laser Printer Toners.
Includes new in factory sealed packaging of Cyan, Yellow, Magenta, and Black.

Renold PH60 Gearbox with WEG Electric Motor

Skylarc Ref B168618

Renold PH60 gearbox unit.
Serial number 8439.
Gearbox ratio 63.4:1.
Mounting type JC.
Recommended gearbox oil: Mobil SHC632.
Supplied and serviced by Renold New Zealand Ltd.
WEG 3-phase electric motor.
Motor model: 3~132S.
Motor power: 5.5 kW at 1460 rpm on 380V/660V 50Hz.
Motor IP55 rating.
Motor weight: 87 kg.
Six-pin industrial power plug attached.
Chain sprocket fitted to gearbox output shaft.

PFAFF 437-6/41-BS Industrial Sewing Machine

Skylarc Ref Y110104

PFAFF 437-6/41-BS industrial sewing machine.
Mounted on a standalone table with caster wheels.
Features a Ho Hsing Servo motor system with electronic controls.
Servo control box is labeled Attwood Electronics Ltd, Auckland.
Includes thread stand with spool holders.
NZ standard three-prong electrical plug is attached.
Uses needle system 135x5 as marked on the machine.
Integrated foot pedal for operation.
Power and operation wiring present under the table.
No accessories or manuals shown.

Union Special 56300R Industrial Sewing Machine

Skylarc Ref X110129

Union Special industrial sewing machine
Model 56300R
Made in USA
Machine is mounted on a work table
Includes attached thread stand
Fitted with dual foot pedals
Motor integrated beneath table
Includes in-table task lamp

Rovin PWM Charge Controller 20A

Skylarc Ref P167410

Rovin PWM Solar Panel Charge Controller 20A kit, model MP3772
Suitable for 12V/24V lead acid, AGM, GEL, flooded, and lithium batteries
Max charge current: 20A; Max PV input power: 260W (12V) / 520W (24V); Max PV voltage: 50V
3-stage charging: constant current, constant voltage, float
Backlit LCD display and dual USB ports for charging devices
Built-in protection: over-voltage, low-voltage, over-current, short-circuit, reverse connection, over-temperature
Dimensions (controller): 135mm x 70mm x 30mm
Box includes: 20A PWM charge controller, 2x 50A connectors (10cm with rubber caps), 1x 50A 4.5m extension lead, 1x 50A to alligator clips 0.5m lead, instruction manual
Total weight (including leads): 955g
New, unused condition

Barrel forklift Attachment

Skylarc Ref X110259

Steel forklift attachment
Designed with two semi-circular arms
Attachment includes two securing knobs
Arms are fixed to a rectangular steel frame
Painted pink exterior with visible surface rust areas
Suitable for mounting on forklift tines
No manufacturer label visible
No model number visible
No hydraulic or electrical features visible

Office Shelving Unit and Drawer Cabinets Set

Skylarc Ref L168680

Includes one tall open shelf unit with eight compartments measures 800mm x 300mm x 1700mm
One small open shelf unit with three compartments measures 360mm x 290mm x 800mm
One two-drawer mobile cabinet with dark sides and handles measures 400mm x 500mm x 630mm
One three-drawer cabinet with light wood finish and metal handles measures 500mm x 400mm x 600mm
Tall shelf unit has visible marks on shelving
Three-drawer cabinet top has visible wear
Two-drawer cabinet is mounted on wheels
All drawer units feature metal handles
Wood finish on all items
No manufacturer branding visible

CP-300 Electric Winch

Skylarc Ref R110253

Model CP-300
Maximum load 300 kg
Speed 10–15 metres per minute
Power supply 240 V 50 Hz
Motor 1.5 HP x 4P
Mounted on a metal stand
Equipped with steel wire rope on drum
Power wiring with five colour coded wires shown
Visible corrosion on motor casing and components
Label on housing identifies specifications
Serial number on label is 301228

2 x Hydroxyl Generators

Skylarc Ref E167971

2 x Hydroxyl generators for air purification
Brand: Bio Blaster Hydroxy Maxx Hydroxyl Cell
Produces H2, H0, and zinc ions
Features metal mesh hydroxyl cells and protective white casing
ON/OFF switch and working indicator light on each unit
Model marking includes "V1 Environment Technology"
Power cables have been cut off; no power cords included
Unable to test functionality
Used condition, with some cosmetic marks visible
For parts or repair

Large Black Corrugated Flexible Hose

Skylarc Ref I168677

Black corrugated flexible hose
Appears to be several metres in length
Hose has a large diameter of 60mm
Includes attached metal coupler
Hose is coiled on a wooden pallet
Visible dirt and debris on hose
Hose material is plastic or synthetic
Coupler appears to be metal with locking arms
No visible branding or markings

Stainless Steel Tubing and Frame Assembly with Control Box

Skylarc Ref O110250

Stainless steel tubing assembly included
Two large diameter stainless steel tubes present
Tubes have welded mounting flanges
Assembly includes supporting metal framework
Mounted electrical control box with switches visible
Electrical junction box and wiring present
Frame includes mounting brackets
Two-way converging tubing arrangement
Item constructed mainly from stainless steel and steel components
Condition as shown in images

Stainless Steel Pipe Fittings and Plastic Bin

Skylarc Ref E109902

Assorted stainless steel pipe fittings included.
Multiple curved pipe sections present.
Some sections have attached clamps and valves.
Pipe fittings appear to be tri-clamp style connections.
White cylindrical plastic bin included.
Some pipe fittings have visible surface discoloration.
Set includes both large and small diameter pipes.
All items are as shown in provided images.

Assorted Industrial Hoses and Fittings

Skylarc Ref N109911

Multiple lengths of industrial hoses included
Hoses appear to be reinforced and flexible
Red and white hoses visible in the bundle
Mounted on a wooden pallet
Some hoses have metal couplings attached
Plastic hose fittings are visible
One red corrugated hose with metal fitting attached
Contents are shown in attached images
No further details on hose specifications provided

WEG W22 Electric Motor with Coupled Pump

Skylarc Ref S110254

WEG W22 electric motor.
Model TE18FOX0.
Power rating 3.5 HP.
IP66 enclosure.
3 phase configuration.
Voltage 380V/660V at 50Hz or 400V/690V at 50Hz or 415V at 50Hz or 460V at 60Hz.
Speed 2890 to 3510 RPM depending on voltage and frequency.
NEMA efficiency 89.9 percent.
Weight 42 kg.
Motor manufactured April 2016.
Motor is coupled to an industrial pump assembly.
Pump has metal frame and two flanged ports.
Coupled unit includes wiring and plug visible.

Hydraulic Ram

Skylarc Ref Q167853

Lift face approx 130mm wide x 110mm

Kerastase Paris Premiere Haircare Set

Skylarc Ref M168447

Kerastase Paris Premiere Haircare Set.
Includes three products:
Concentre Decalcifiant Ultra-Reparateur 250 ml.
Bain Decalcifiant Reparateur 250 ml.
Fondant Fluidite Reparateur 200 ml.
Concentre Decalcifiant Ultra-Reparateur contains 8 percent citric acid and glycine.
Bain Decalcifiant Reparateur contains citric acid and glycine.
Fondant Fluidite Reparateur contains citric acid and glycine.
All items are suitable for all types of damaged hair.
Products are designed for decalcifying and repairing hair.

Borg Warner MAXIMUS Industrial Gearbox MH101

Skylarc Ref S168349

Borg Warner MAXIMUS industrial gearbox
Model MAXIMUS MH101
Size MH101
Ratio 13:6
Serial number 39438
Manufacturer Borg-Warner (Aust) Ltd Sydney
Visible shaft with gear and coupling
Nameplate notes input speed and max output torque fields are present but unreadable.
Rusty exterior. Appears to have been stored outdoors for some time as vented fan assembly is full of leaves. Operational condition is unknown.

Restran Isolating Transformer 1kVA 230V

Skylarc Ref C168307

Manufacturer is Resistor Winders (New Zealand) Limited.
Model is Restran Isolating Transformer.
Serial number is 9859.
Input is 230V 50Hz.
Output is 230V 50Hz.
Rated at 1kVA.
Rated at 4.4 amps.
Unit is built to NZSS 1379 Class 11 non-splashproof standard.
Unit contains no earthed parts.
Supplied by a 2-wire cord.
Fitted with a fuse and cut out as protection against overload.
To reset overload disconnect from mains and allow to cool.
Handle attached on top for carrying.
Single NZ-style mains plug.
Manufactured in Stokes Valley, New Zealand.

Box of Condenser Flasks and Accessories

Skylarc Ref O167695

Box of Assorted Condensers and accessories

Rovin PWM Charge Controller 20A

Skylarc Ref O167409

Rovin PWM Solar Panel Charge Controller 20A kit
Pulse Width Modulation (PWM) solar charger for 12V/24V battery systems
Max charge current: 20A
Supports sealed, gel, flooded, AGM, and lithium batteries
Handles up to 260W (12V) or 520W (24V) solar arrays
Plug-and-play compatible with Rovin solar panels
Three-stage charging: constant current, constant voltage, float
Dual USB charging ports for gadgets
Safety features: over-voltage, low-voltage, reverse connection, short-circuit, over-current, and over-temperature protection
Backlit LCD screen for monitoring system status
Dimensions (excluding leads): 135(L) x 70(W) x 30(H) mm
Kit includes: 20A PWM controller, 2 x 50A connector 10cm leads with rubber caps, 1 x 50A connector 4.5m extension lead, 1 x 50A connector to alligator clips 0.5m lead
Instruction manual included
New, unused condition

Double Drum Stainless Steel Tumbler with CMG Three Phase Motor

Skylarc Ref H168624

Double drum stainless steel tumbler unit
CMG three phase motor fitted
Motor power 0.37 kW
Motor voltage 380V
Motor current 1.3A
Motor RPM 1390
Motor bearing DE 6202-2RS/C3 NDE 6202-2RS/C3
Manual start and stop push button controller included
Start stop control box by Sprecher+Schuh model KSA-12
Fitted with water inlet or spray bars to both drums
Unit is mounted on stainless steel frame
Three phase plug attached to power cable
IEC 60034 CE rated motor

Mercado Ikuu Digital Entrance Lock

Skylarc Ref I167403

Mercator Ikuu Digital Entrance Lock, model SMA071-BT
Bluetooth local app control—no hub required
Capacitive keypad for keyless entry
Backlit keypad, create temporary access codes, and manage users from your smartphone
Works with iOS and Android (mobile device not included)
App features: unlock, manage users, create access codes, view logs, change locking settings (within 10m Bluetooth range)
Power: 4xAA batteries (not included), backup microUSB port
Fits 54mm main bore, 25mm cross bore, 60/70mm backset, 35-54mm door thickness
3 year warranty shown on box
Includes various lock components as pictured, not guaranteed to be complete
Some signs of prior use visible in photos
Refer to images for exact parts included

75mm Box Steel 2100mm Long with Casters

Skylarc Ref G110242

75mm box steel beams
Length of each beam is 2100mm
Casters have red outer rings and black inner wheels
Steel beams are painted white
Beams have mounting plates at each end with multiple holes
Visible surface rust present on beams and mounting plates
Total of two box steel beams are shown
Beams and casters are physically attached as single units

Ullrich 3.0m Aluninium Ladder

Skylarc Ref V109945

Ullrich 3.0m Aluninium Ladder.
Model SL 3.0m
250mm long aluninium wall mount brackets added to sides for mounting to a wall.

Brother LK3-B430-6 Industrial Sewing Machine

Skylarc Ref B110133

Brother Industries Ltd model LK3-B430-6 sewing machine
Made in Japan
Includes metal work table
Machine is mounted to wood top with steel frame base
Integrated foot pedal present
Task light included and attached to table
Thread holder stand attached to rear left of table
Belt and pulley mechanism at rear of machine visible
Serial number visible on machine badge
Power switch and electrical wiring visible on table

Assorted Power Supplies and Associated Items

Skylarc Ref J167976

Large lot of assorted power supplies and related items as per photos
Includes multiple power bricks, AC adapters, and various cables
Mix of DC power adapters, mains leads, test leads, and patch cords
Contains some new/unused components in sealed packaging
Notable brands visible include Multicomp Pro, DigiKey, and Powertech
Range of connectors: barrel plugs, Ethernet, USB, IEC, and more
Items stored in labelled plastic containers for easy transport
Great lot for electronics projects, repairs, or spare parts
Quantities and exact specifications vary—see images for details

Industrial Steel Rollers 1800mm x 200mm

Skylarc Ref M110248

Set of five steel rollers.
Each roller is 1800mm in length.
Each roller has a diameter of 200mm.
Rollers have welded helical seams.
Each roller has steel shafts at both ends.
Ends of shafts are fitted with square metal plates.
Square plates show surface rust.
Rollers are strapped together on a pallet

Steel Acrow Props Assorted Lengths

Skylarc Ref C168619

Lot of 6 steel acrow props.
4 props are 2000mm in length.
2 props are 3200mm in length.
Each prop is fitted with square base and top plates.
All props have adjustable screw mechanisms.
Finish is galvanised steel.
Pins included for each prop.

Pallet of Keystone F783 Actuators and Control Units

Skylarc Ref Z109923

Pallet contains multiple Keystone F783 actuators.
Actuators are stainless steel bodies with black plastic end caps.
Wiring is attached to some units.
Bag includes at least two blue and beige electronic control boxes.
Keystone branding visible on actuator housings.
Units appear to be untested.
All items are contained within a large white bulk bag on a pallet.
No further accessories or documentation included.

Pallet Racking Shelf Assembly

Skylarc Ref Z168330

Pallet Racking Shelf Assembly.
Includes the following components:
2x 900x90x1800mm galvanised vertical frames.
4x 1800x50x45mm orange horizontal beams.
Shelving boards not included.
Some rusting to orange beams.

Aeroqual Ranger Air Quality Handheld Monitor

Skylarc Ref G167427

Aeroqual Ranger Air Quality Handheld Monitor.
Made in New Zealand.
Includes Sensor attachment CH4 0-10000 ppm 0112222-004
Includes USB-C charger.
https://www.aeroqual.com/products/ranger-portable-air-monitor/ranger-portable-air-quality-monitor

5x Dry Powder Fire Extinguishers

Skylarc Ref B168332

5x Dry Powder Fire Extinguishers.
Lot includes 5 units of dry powder fire extinguishers.
Brands present include Chubb and SPFP.
ABE powder stored pressure type.
Includes:
- 2x Fire extinguishers 2: 1.5kg ABE powder capacity, fire rating 2A:30B:E, overall mass 2.7kg, working pressure 1000kPa, periodic test pressure 2.0MPa.
- 2x Fire extinguishers 3: 2.5kg ABE powder capacity, fire rating 3A:40B:E, overall mass 4.5kg, working pressure 1350kPa, periodic test pressure 2.1MPa.
- 1x Fire extinguisher 5: 4.5kg ABE powder capacity, fire rating 4A:80B:E, overall mass 7.2kg, working pressure 1350kPa, periodic test pressure 2.0MPa.

All units are fitted with pressure gauges.
All are untested and have expired testing tags.

2017 Silver Specimen Kiwi Coin Rakiura Tokoeka

Skylarc Ref G166023

2017 Silver Specimen Kiwi Coin Rakiura Tokoeka.
Limited worldwide mintage of 7500.
1oz silver proof coin minted from 0.999 silver.
Made for the Reserve Bank of New Zealand and New Zealand Post.
New in unopened sealed packaging.
Some light tarnishing of silver along coin edges, see photos.
See our other listings for more of these collectible coins.
See the New Zealand Post web page below for further item details:
https://collectables.nzpost.co.nz/2017-kiwi-silver-specimen-coin-pid-cu6isscn/?srsltid=AfmBOoopOpWNBHC5s9UNg315hcNvzDQvXC-1djNfSj3KYLoahX-wSeUd

Pall Filter Housing SAS16S1NW80J

Skylarc Ref N168630

Pall filter housing model SAS16S1NW80J
Maximum operating pressure 0.7MPa
Maximum operating temperature 140°C
Material appears to be stainless steel
Unit is mounted on three fixed legs
Domed top with lifting handles and bolted flange
Inlet and outlet ports visible
No filtration elements included
Internal and connection cleanliness not verified

Techtop TAI 71B-4 Electric Motor with Gearbox

Skylarc Ref M168317

Techtop electric motor type TAI 71B-4
Duty S1
IP55 rated
Manufactured in 2019
IEC60034-1 compliant
Motor weight 6.1 kg
IM B5 mounting
Voltage 415V 50Hz 0.37kW 1.06A 1400rpm
Voltage 230/400V 50Hz 0.37kW 1.79/1.04A 1390rpm
Voltage 440/480V 60Hz 0.40/0.44kW 1.02A 1685rpm
Efficiency 69.5 percent
Bearing DE 6202 ZZ C3
Bearing NDE 6202 ZZ C3
Supplied by Techtop Australia Pty Ltd
Gearbox attached
Gearbox flange mounting
Gear shaft visible on output side
CE marked

2017 Silver Specimen Kiwi Coin Rakiura Tokoeka

Skylarc Ref R166008

2017 Silver Specimen Kiwi Coin Rakiura Tokoeka.
Limited worldwide mintage of 7500.
1oz silver proof coin minted from 0.999 silver.
Made for the Reserve Bank of New Zealand and New Zealand Post.
New in unopened sealed packaging.
See our other listings for more of these collectible coins.
See the New Zealand Post web page below for further item details:
https://collectables.nzpost.co.nz/2017-kiwi-silver-specimen-coin-pid-cu6isscn/?srsltid=AfmBOoopOpWNBHC5s9UNg315hcNvzDQvXC-1djNfSj3KYLoahX-wSeUd

3x Acer Laptop Docking Stations

Skylarc Ref F167166

3x Acer Laptop Docking Stations.
All are model D16C1
Each measures 410x125x20mm.
Mounting plug into laptop is approx 50x6mm.
Unknown what models of Acer laptops are compatible with these units.
Note that all units are missing their 19V, 4.74A power supply adapters. Buyer will need to source replacement power supplies.

1.5-Ton Capacity Lever Block by Vital

Skylarc Ref J168340

1.5-Ton Capacity Lever Block by Vital.
7mm Chain size.
Rusty surfaces.

Durkopp Adler 274 140042 AP Industrial Sewing Machine

Skylarc Ref E110110

Durkopp Adler industrial sewing machine.
Type 274 140042 AP.
Serial number 590598.
Made in Germany.
Includes integrated control panel model V720.
Fitted with a 20A 500V 3-pin plug (Cat No 56P420).
Standalone unit with dedicated table and foot pedal.
Power and pneumatic connections present.

Jonnesway AN040066 Puller and JTC 849070 70mm Socket

Skylarc Ref D168672

Jonnesway AN040066 puller tool shown.
Puller tool is black metal with hex head and threaded shaft.
JTC socket stamped with 849070 and 70mm marking.
Socket is black metal and has a large hexagonal profile.
Two pieces included as shown in the images.

Assorted Heavy Equipment Bucket Teeth and RUD Lifting Points

Skylarc Ref M168655

Lot includes an assortment of bucket teeth and adapters.
RUD branded lifting points are present in the lot.
Lifting points are marked with 19-1 and ABA CC.
Various shapes and sizes of bucket teeth included.
All items are metal construction.
Visible surface rust is present on several components.
Two hook-shaped items included.
Quantity as pictured.
Plastic toolbox is included in the lot.

Maser B3109A Cable 50M and TFC/Amphenol 50M Cable Spools

Skylarc Ref A168305

Maser B3109A cable spool
Label indicates 50 metres
Black outer sheath
Second spool labelled TFC Amphenol
Second spool label indicates 50 metres
Both cables have multiple inner conductors
Both spools include original manufacturer labels
Spools are made of wood
Outer insulation appears to be intact
See photos for cable cross-section details

3-Phase Industrial Motor & Stainless Pump

Skylarc Ref M168343

3-Phase Industrial Motor & Stainless Pump.
Motor is a WEG W22 High Efficiency 3-phase electric motor.
Model: 3-90S
Motor output: 1.5kW
Voltage: 380V 400V 415V star connection
Current: 3.11A at 380V 3.02A at 400V 3.03A at 415V
Rated RPM: 2860 at 50Hz
IP66 protection rating
Insulation class H.
Motor manufactured in 2016.
Includes stainless steel pump housing of unknoen brand/model.
Stainless perforated intake shroud
Fitted with industrial 5-pin 3-phase plug
Pump assembled on stainless steel base tray.

20m 15A Extension Cord

Skylarc Ref D167970

20 metre heavy duty extension cable
Rated for 15A, 250V
Bright orange cable for visibility and safety
Fitted with clear, heavy duty 15A plug and socket
Plug and socket marked “United Eagle”
Suitable for construction, workshop, and outdoor use
Cable and connectors appear in good condition with only minor signs of use

BrightLight LED Exterior 50W Flood Light

Skylarc Ref M109806

BrightLight LED Exterior Flood Light.
Model No.BL-CL-104-NW
50W
4000K light colour output.
IP65 weather rated.
1-metre single phase 10A plug attached.
Functions normally.

Ryobi 18V ONE+ Random Orbital Sander, Tool Only

Skylarc Ref X167418

Ryobi 18V ONE+ Random Orbital Sander, model RROS18
125mm diameter pad, 10,000 orbits per minute
Compatible with all Ryobi ONE+ 18V batteries (not included)
Efficient dust collection bag attached
Rubber grip handle for comfort and control
Shows light signs of use, overall good condition
Auction includes tool only, battery and charger not included

20A PWM Charge Controller

Skylarc Ref Z167992

Rovin MP3772 20A PWM Charge Controller, plug-and-play with Rovin solar panels
Supports GEL, AGM, flooded and lithium batteries
Rated voltage: 12/24V, max PV voltage: 50V
Rated current: 20A, max PV input 260W (12V) / 520W (24V)
3-stage charging with settable voltage and built-in timer
Dual USB ports for device charging
MCU control for reliable performance
Includes high current connectors, battery alligator clips, full cable kit and instruction manual

Meyer RPS-Junior Fusing Machine

Skylarc Ref Q110122

Manufacturer: Maschinenfabrik Herbert Meyer GmbH
Model: RPS-Junior
Type: RPS-M 1400
Manufacture year: 1994
Main voltage: 415V three phase AC
Control voltage: 220V AC and 24V DC
Frequency: 50 Hz
Main current: 36A
Maximum fuse current: 50A
Power: 25kW
Control unit: Meyer Metronic 500
Includes control panel with temperature, speed, and pressure controls
Five pin three phase plug
Documents and manuals included
Made in Germany

3 Phase Electric Motor

Skylarc Ref W167651

3 Phase Electric Motor

2x Auline 4000mAh 11.1V Battery Packs

Skylarc Ref G167401

2x Auline A45 4000mAh battery packs
Model: A45, 3S, 11.1V, 44.4Wh, 45A discharge rate
Fitted with XT30 connectors and balance leads
Each pack is marked as A4345
Both batteries appear unused and in new condition
One battery includes original box
Battery chemistry is not specified on labels
Made in China

Ramsey Shielded Test Enclosures STE2200 STE2300 Bulk Lot

Skylarc Ref F168310

Lot includes 18 small enclosures measuring 250mm x 180mm x 120mm
Lot includes 3 large enclosures measuring 320mm x 230mm x 160mm
Manufacturer is Ramsey Electronics LLC
Small enclosures model STE2200
Large enclosures model STE2300
All enclosures are shielded test enclosures
Enclosures are black with metal panel and plastic hardware
Connectors present on side panel including DB9 and DB25 types
Each enclosure has a foam-lined interior
STE2200 and STE2300 model labels are present
Serial numbers are visible on individual units
Some enclosures have external panel connectors
Quantity and measurements are as specified above

Assorted Electronic Components

Skylarc Ref H167402

Large lot of assorted electronic components and modules, ideal for prototyping, hobbyist or IoT projects
Includes multiple sensor boards: flow sensors, SGX NGM-1 methane (CH4), Sensair 006-1-0100 CO2, ethanol, ozone
Powertech Plus multi-voltage switchmode AC adaptors (3–12VDC/1.5A and 9–24VDC/1.5A max, both new in packaging)
Raspberry Pi accessories: genuine Pi 3 case (black, sealed), RTC clock module for Raspberry Pi
Sixfab Base HAT for IoT with antennas and Telit ME910C1-WW cellular module
XWST DC-DC converters (12/24V input to 5V3A USB output, qty 2, new in packaging)
Selection of terminal blocks, XT60 connectors, SIM cards (Spark M2M), microSD cards, and adapters
STM32 development tools (sealed pack), cabling, and miscellaneous PCBs and connectors
All items appear to be in new or lightly used condition as shown in photos

Assorted IT Network, Server, Components, Cabling, & More

Skylarc Ref D168360

Assorted IT Network, Server, Components, Cabling, & More.
Various older server parts, network devices, cables, custom made electrical boards and other retailed items, see photos.

Tridonic ATCO TX0650FPE-01 Isolating Transformer

Skylarc Ref D168308

Model TX0650FPE-01
Serial number 34599
Input voltage 230V
Output voltage 230V
Rated power 0.65 kVA
Frequency 50/60Hz
Single phase
For indoor use only
Isolating transformer
Primary fuse 1 x T3.15A
Standard IEC 127-2 Std. Sht. 5 AS/NZS61558
Manufactured by ATCO Controls Ltd
9 Aintree Avenue, Mangere, Auckland
www.tridonicatco.co.nz
Calibration sticker present
Calibration Connect ID Transformer 05
Cert. No. 20388
Calibrated 4 Feb 2016
Next calibration due 4 Feb 2017
IEC power input socket
one standard NZ power outlet
Plastic carry handle on top of enclosure

Ozone Generator

Skylarc Ref B167994

Airthereal Ozone Generator, model MA10K-PRODIGI
Ozone production: 10,000mg/h
Input: 110-120V, 60Hz, 110W
No power cable included, unit is untested
Digital control panel with fan, ozone, power, interval, and timer functions
Blue metal case with carry handle
Warning: For use in unoccupied spaces only
Made in China, CE and RoHS certified
Serial number: A3MA2345 printed on unit

40W Solar Panel

Skylarc Ref A167811

Powertech 40W Solar Panel, model ZM9056
Maximum Power: 40W (±5%)
Open Circuit Voltage: 21.5V
Short Circuit Current: 2.5A
Rated Voltage: 17.2V
Rated Current: 2.33A
Maximum System Voltage: 1000V
Includes assorted connecting cables, MC4 connectors, and additional wiring shown in photos
Panel is in good physical condition with minor signs of use
Ideal for off-grid, camping, or battery charging setups

Industrial Gear Motor with Mount Brackets

Skylarc Ref Z110235

Industrial gear motor unit shown in images
Attached dual steel mounting brackets with slotted bolt holes
Large metal output gear with visible rust and wear
Electric motor housing attached to gearbox
Wiring terminals exposed at rear of motor
Housing appears to be cast metal construction
No identification labels visible in provided images
Power rating and other specifications not visible

Assorted Hand Tools, Garden Tools, & More

Skylarc Ref P168346

Assorted Hand Tools, Garden Tools, & More.
Includes various Shovels, broom, pick axe, saws, plant/bush clippers, and other Tools, see photos for further details.
Condition varies with each item.

Bulk Lot White Woven Polypropylene Bags on Pallets

Skylarc Ref X167262

Bulk lot of white woven polypropylene bags.
Bags are stacked on multiple pallets.
Included are cardboard boxes containing additional material.
Pallets and bags are wrapped with clear plastic sheet.
Loose flat panels are visible among the stack.
Number and exact size of bags is not specified.
Bags appear to have blue stitching.
Location is an indoor warehouse setting.
Contents are as shown in the images.

Electrical Control Enclosures with Wiring and Terminals

Skylarc Ref Y168303

Two electrical control enclosures included.
Clear plastic front covers with 'Danger Live Wires Below' labels.
Internal terminal blocks for Earth, Neutral, and Phase connections.
Wiring and cabling present inside enclosures.
External case-mounted connectors include DB25, DB9, RJ45, and USB.
One enclosure features an additional external weatherproof junction box.
Internal wiring includes brown, blue, black, and orange wires.
Component label advising to check unit connections before use.
Hinged front cover with locking clips on each enclosure.
No manufacturer or model number visible.
Each enclosure measures 480mm x 370mm x 200mm

SokioVola 50W Solar Charger

Skylarc Ref K167405

SokioVola 50W solar charger, portable folding design
Measures 370x200mm when folded, 795x370mm when open
Equipped with USB-A, USB-C, and a circular DC output port (see photos for detail)
Fabric-covered panels with corner eyelets for easy hanging or mounting
Solar panel array folds into a compact form for storage and transport
Shows no obvious usage marks or wear
Ideal for charging devices off-grid, camping, or emergency backup

Assorted Hand Tools and Workshop Tools Lot

Skylarc Ref A168669

Includes multiple flathead and Phillips head screwdrivers
Adjustable spanners in various sizes
Open-ended and combination spanners
Allen key set
Pipe cutter tool
Grease gun with red body
Claw hammer with black grip handle
Metal socket tools
Assorted spanner wrenches
Metal scraper tool with large flat blade
Assorted metal round spacers or flanges
Components include metal rods and specialty tool heads
Mix of metric and imperial sizing observed on spanners
Various workshop hand tools
Contents as shown in photos

Greens Plastic Bin Wheelbarrow

Skylarc Ref U168351

Greens Plastic Bin Wheelbarrow.
Galvanised steel frame
Crack in bottom of bin, see photo.
Tyre needs some air.

9x Assorted Desktop/Benchtop Lecterns

Skylarc Ref C167241

All are plywood and MDF construction with wood stain finish.
Sizes include:
1x flat topped unit 800x595x175mm.
1x flat topped unit 615x580x85mm.
5x angled topped units each 405x280mm and heights from.150-200mm.
2x angled topped units each 405x280mm and heights from 110-160mm.

Assorted Layflat Hoses with Fittings

Skylarc Ref P168632

Includes multiple blue layflat hoses.
Includes multiple red layflat hoses.
Hoses are equipped with fittings.
Some hoses have metal hose couplings attached.
One flexible hose section with a right angle fitting is included.
Pallet is not included.

Assorted Stainless Steel Piping, Machine Covers, Copper Piping

Skylarc Ref V168352

Assorted Stainless Steel Pipe lengths, connectors.
Assorted Stainless machine covers, panels.
Assorted pladtic coated copper Piping.
All on a 1200x1100mm pallet.

Heavy Steel Support Frame

Skylarc Ref W168353

Heavy Steel Support Frame.
80x80x6mm angle steel frame.
Adjustable feet bolts.
Very sturdy multi purpose frame.

Industrial Pump Trolley w/ 11kW Electric Motor

Skylarc Ref Y109948

Industrial Pump Trolley.
Appears to be a custom.assembled unit.
Stainless steel pump unit of unknown make, approx 500mm diameter, with 100mm diameter hose entering and exiting pump.
Poweed by a 3-Phase Crompton Parkenson 11kW Electric motor Model D160M.
Both units mounted to a heavy sterl frame on castors.
See photos for further design/type details.
Rusty motor and trolley frame.

Vacuum Dust Collector Unit

Skylarc Ref T110125

Vacuum dust collector unit with metal cabinet construction
Single front door with transparent window and handle
Main compartment contains a dust filter mounted on a vertical pipe
Removable lower drawer for dust collection
Fitted with a power cable and three-prong plug
Mounted on four caster wheels for mobility
Power switch located on rear lower panel
Label on unit references vacuum use for shirts
Japanese instruction label for filter cleaning located on front
No model number or manufacturer details visible

50kg Platform Scale by Toltec

Skylarc Ref C168359

50kg Platform Scale by Toltec.
Type No.209
Platform measures 340x250mm and is 130mm above floor.
320mm diameter dial face
Condition - Exterior surface in average condition showing rusty surfaces. Dial glass cover is missing. We are giving it a "Good" condition rating though as the scale Platform is floating smoothly and easily on its springs and is reading cinsistantky about 0.4kg under our digital scale, likely would be fine with a proper long overdue calibration, and a surface cleanup and restoration!

Assorted Brooms, Mop, Cleaning Brushes, Mat

Skylarc Ref Q168347

Mixed Lot of cleaning items includes various brooms, mop and bucket large cleaning brushes on ling piles, 910x650mm rubber mat.
See photos for further details on items included.
Condition varies with each item.

Robus RP50LEDF45-04 50W LED Floodlight

Skylarc Ref H110217

Robus 50W LED floodlight
Product code RP50LEDF45-04
Input voltage 220-240V 50/60Hz
Total power 50W
Correlated colour temperature 4500K
IP65 rated enclosure
Black plastic and metal housing
Includes attached cable with orange 3-pin 10A 250V plug
Plug is NHP brand model 150PS310P
CE marked

Stainless Steel Electrical Cabinet w/ Contents

Skylarc Ref I168339

Stainless Steel Electrical Cabinet w/ Contents.
Cabinet measures approx 460mm wide, 230mm deep, 500mm tall.
6x control buttons plus emergency stop knob mounted on front panel.
See photos for Cabinet xomtent details.
50mm diameter stainless steel pipe welded to bottom.

EcoLite 410x1385mm Plastic Bags, 350x Units

Skylarc Ref Y166873

EcoLite 410x1385mm Plastic Bags.
350x units in box.
50 gauge Plastic.
Manufactured in 04/2022.
New in manufacturer box, photos are indicative.

Wooden Chest

Skylarc Ref K168575

Colour

Brown

Solid wooden chest with hinged lid
External dimensions: 1000mm (W) x 450mm (D) x 520mm (H)
Internal dimensions: 960mm (W) x 375mm (D) x 420mm (H)
Classic rectangular design with stained wood finish
Black painted interior, ideal for storage
Strong construction suitable for general household use
Visible marks, scratches and wear consistent with use
Great as a blanket box, toy chest, or general storage unit

Redken All Soft Heavy Cream & Argan-6 Oil

Skylarc Ref B166200

Redken All Soft Heavy Cream & Argan-6 Oil.
Includes:
2x Redken All Soft Heavy Cream treatment tubes are 250 ml each.
3x Redken All Soft Argan-6 Oil bottles are 111 ml each.

Endress+Hauser Promag 10 Electromagnetic Flowmeter

Skylarc Ref B168358

Model Promag 10 electromagnetic flowmeter.
Manufacturer Endress+Hauser.
Order code 10H50-1F0A1AA0A5AA.
Serial number 9B0D8419000.
Ingress protection IP67 NEMA Type4X.
Power requirement 20-28VAC 6W 50-60Hz.
Digital display with control buttons.
Stainless steel body with Tri-Clamp connections.
Product includes attached wiring and cable.

WEG Electric Motor and Gearbox with Chain Conveyor

Skylarc Ref G109930

WEG electric motor mounted on gearbox with conveyor attachment
Motor model 3-90L 280UT03 GIG4916
Motor rated for 1.5 kW at 50 Hz and 1.8 kW at 60 Hz
Voltage ranges: 220V Delta, 380V Star, 230V Delta, 400V Star, 415V Star, 440V Star
Speed ratings: 1410 rpm at 50 Hz and 1705 rpm at 60 Hz
IP55 rated motor enclosure
Polyrex EM-ESSO bearings 6205-ZZ and 6204-ZZ
Gearbox and chain conveyor mounted on steel base
Heavy-duty chain included on conveyor assembly
Power cable attached to motor
Metal nameplate visible on gearbox but partially unreadable
Motor manufactured by WEG, Made in Brazil

Stainless Steel Filtration System Components

Skylarc Ref U109918

Stainless steel cylindrical vessels included.
One cylindrical vessel includes mounting brackets.
One vessel features a pressure gauge attached.
Stainless steel tubing with valve is present.
Box contains white filter discs labeled 140 mesh 109 micron polyester 10 pieces.
Clear flexible hose included.
Assorted fittings and hardware present.
Items supplied on a wooden pallet.

APC Smart-UPS Units and Assorted Electronics Pallet

Skylarc Ref L110143

Pallet includes five APC Smart-UPS units.
APC Smart-UPS units have instructions for installation and setup on front panel.
AC power cables and grey hoses are present on the pallet.
Box contains assorted wired devices and bubble-wrapped metal items.
Multiple Verifone card payment terminals are included in a box.
Box contains a variety of AC adapters and power supplies.
Plastic container includes additional power adapters and cables.
Box contains wired headsets and antenna-related components.
Label indicates contents for making custom lengths of comms cable for external RFMesh units (4-core).
Multiple cardboard boxes with unspecified contents included on pallet.

Alcatel-Lucent Mass Flow Controller MC-20SLPM

Skylarc Ref N167408

Alicat Scientific Mass Flow Controller, Model MC-20SLPM-D-25BSPP
0–20 SLPM range, with digital display
1/4" British Standard Pipe Parallel (BSPP) connections
For Oxygen (O2), 5IN, 5M configuration
Manufactured June 2024, Serial Number 489625
Includes factory calibration certificate (calibrated 21/06/2024)
Accuracy ±0.6% of reading or ±0.1% full scale
Pressure range: up to 160 PSIA, Temp accuracy: ±0.75°C
Included: USB-MD8-232 USB to 8-pin mini DIN, 6' RS232 cable, accessories as pictured
New, unused, sealed in original packaging

Vacuum Pump with Magnetic Starter 3.7kW

Skylarc Ref Q168685

Vacuum pump unit
Fitted with magnetic starter type MS-AII-PB
Starter voltage rating 200-240 or 380-440 or 500-550V
Starter 3 phase
Power rating 3.7kW or 5HP
Tested by Macdonald Machinery Ltd
On off switch present but noted as disabled
Runs when powered according to attached tag
Multiple output ports visible
Power cable included but not terminated

Vortex Stainless Steel Industrial Fan Housing Assembly

Skylarc Ref T109917

Stainless steel construction.
Includes round intake and rectangular outlet sections.
Box section contains fan mounting and connecting hardware.
Label on housing reads Vortex.
Appears designed for industrial air handling or dust extraction.
Includes removable inspection cover on top of the circular section.
Unit is shown mounted on a wooden pallet.
Orange plastic tray with loose fasteners attached to assembly.
Fan impeller visible inside the housing.
No drive motor or wiring is present.
Dimensions not specified.